EN 50411-3-5-2015 en Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5 Wall outlet.pdf

1、BSI Standards PublicationBS EN 50411-3-5:2015Fibre organisers and closuresto be used in optical fibrecommunication systems Product specificationsPart 3-5: Wall outletBS EN 50411-3-5:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50411-3-5:2015.The UK parti

2、cipation in its preparation was entrusted to TechnicalCommittee GEL/86/2, Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovision

3、s of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 80667 4ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published unde

4、r the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBS EN 50411-3-5:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50411-3-5 December 2015 ICS 33.180.20 English Version Fibre organisers and closur

5、es to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet Organiseurs et botiers de fibres utiliser dans les systmes de communication par fibres optiques - Spcifications de produits - Partie 3-5: Prise murale LWL-Spleikassetten und Muffen fr die Anwendung

6、in LWL-Kommunikationssystemen - Produktspezifikationen - Teil 3-5: Wandanschlussdose This European Standard was approved by CENELEC on 2015-06-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

7、 of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, G

8、erman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belg

9、ium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

10、, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitat

11、ion in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50411-3-5:2015 EBS EN 50411-3-5:2015EN 50411-3-5:2015 2 Contents Page European foreword 3 1 Scope .5 1.1 Product definition 5 1.2 Operating environment .5 1.3 Reliability 5 1.4 Quality assurance 5 1.5 Allowed fibre

12、and cable types 6 2 Normative references .6 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions .7 3.2 Abbreviations .7 4 Description 7 4.1 Optical fibre wall outlet .7 4.2 Optical fibre minimum storage and bending radius 9 4.3 Cable fixing .9 4.4 FMS system 9 4.5 Materials .9 4.6 Las

13、er safety 9 4.7 Marking and identification 9 5 Variants 10 6 Dimensional requirements . 11 7 Tests . 11 7.1 Test sample size . 11 7.2 Test sample preparation 11 7.3 Test and measurement methods. 12 7.4 Test sequence . 12 7.5 Pass/fail criteria 12 8 Test report 13 9 Performance requirements . 13 9.1

14、Dimensional and marking requirements 13 9.2 Ingress, optical and appearance performance criteria . 13 9.3 Mechanical ingress performance requirements 14 9.4 Environmental ingress performance requirements 15 9.5 Mechanical optical performance requirements . 15 9.6 Environmental optical performance re

15、quirements . 16 9.7 Material performance requirements . 17 Annex A (informative) Fibre for test sample details 18 Annex B (normative) Sample size and product sourcing requirements . 19 Annex C (informative) Relationship of EN 50346 with other copper cabling standards . 20 Bibliography 21 BS EN 50411

16、-3-5:2015EN 50411-3-5:2015 3 European foreword This document (EN 50411-3-5:2015) has been prepared by CLC/TC 86BXA “Fibre optic interconnect, passive and connectorised components“. The following dates are fixed: latest date by which this document has to be implemented at national level by publicatio

17、n of an identical national standard or by endorsement (dop) 2016-06-11 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-06-15 EN 50411, Fibre organisers and closures to be used in optical fibre communication systems Product specifications, is

18、 currently composed of the following parts: Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors; Part 2-2: Sealed pan fibre splice closures Type 1, for category S Part 2-3: Sealed inline fibre splice closures Type 1, for categor

19、y S Part 2-4: Sealed dome fibre splice closures Type 1, for category S Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S Part 2-8: Microduct connectors, for air blown optical fibres, Type 1; Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category

20、 S Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks; Part 3-1: Fibre management system, splice wall box, for category C Part 3-2: Singlemode mechanical fibre splice; Part 3-3: Singlemode optical fibre fusion splice protectors; Part 3-4: Fibre managem

21、ent system, modular splice and connector wall box, for category C Part 3-5: Wall outlet the present document; Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U); BS EN 50411-3-5:20152BS EN 50411-3-5:2015EN 50411-3-5:2015 2 Contents Page European foreword

22、3 1 Scope .5 1.1 Product definition 5 1.2 Operating environment .5 1.3 Reliability 5 1.4 Quality assurance 5 1.5 Allowed fibre and cable types 6 2 Normative references .6 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions .7 3.2 Abbreviations .7 4 Description 7 4.1 Optical fibre wall

23、 outlet .7 4.2 Optical fibre minimum storage and bending radius 9 4.3 Cable fixing .9 4.4 FMS system 9 4.5 Materials .9 4.6 Laser safety 9 4.7 Marking and identification 9 5 Variants 10 6 Dimensional requirements . 11 7 Tests . 11 7.1 Test sample size . 11 7.2 Test sample preparation 11 7.3 Test and

24、 measurement methods. 12 7.4 Test sequence . 12 7.5 Pass/fail criteria 12 8 Test report 13 9 Performance requirements . 13 9.1 Dimensional and marking requirements 13 9.2 Ingress, optical and appearance performance criteria . 13 9.3 Mechanical ingress performance requirements 14 9.4 Environmental in

25、gress performance requirements 15 9.5 Mechanical optical performance requirements . 15 9.6 Environmental optical performance requirements . 16 9.7 Material performance requirements . 17 Annex A (informative) Fibre for test sample details 18 Annex B (normative) Sample size and product sourcing requir

26、ements . 19 Annex C (informative) Relationship of EN 50346 with other copper cabling standards . 20 Bibliography 21 BS EN 50411-3-5:2015EN 50411-3-5:2015 3 European foreword This document (EN 50411-3-5:2015) has been prepared by CLC/TC 86BXA “Fibre optic interconnect, passive and connectorised compo

27、nents“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-11 latest date by which the national standards conflicting with this document have to be withdrawn (dow)

28、2018-06-15 EN 50411, Fibre organisers and closures to be used in optical fibre communication systems Product specifications, is currently composed of the following parts: Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors; Part

29、 2-2: Sealed pan fibre splice closures Type 1, for category S Part 2-3: Sealed inline fibre splice closures Type 1, for category S Part 2-4: Sealed dome fibre splice closures Type 1, for category S Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S Part 2-8: Microduct co

30、nnectors, for air blown optical fibres, Type 1; Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks; Part 3-1: Fibre management system, splice wall box, for category C Par

31、t 3-2: Singlemode mechanical fibre splice; Part 3-3: Singlemode optical fibre fusion splice protectors; Part 3-4: Fibre management system, modular splice and connector wall box, for category C Part 3-5: Wall outlet the present document; Part 3-6: Multimode mechanical fibre splice for use in an outdo

32、or protected environment (Cat U); BS EN 50411-3-5:20153BS EN 50411-3-5:2015EN 50411-3-5:2015 4 Part 3-8: Fibre management system, terminal equipment box type 1 for category C currently at Formal Vote stage; Part 6-1: Unprotected microduct for category S and A. Attention is drawn to the possibility t

33、hat some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Fibre organisers and closures to be used in optical fibre communication systems Product specifications Part 3-5: Fibre manage

34、ment system, FTTH wall outlet, for category C Description Performance Construction: Wall /Flush/Trunking mounted outlet Cable Fixing: Mechanical Connector: EN 50377 series EN 60603-7 series Fibre types: EN 60793-2-50, B1 and B6 Fibre management: Integrated in wall outlet Applications: Fibre line ter

35、mination in FTTH networks for indoor controlled environments EN 61753-1 Category C Sealing performance: IP 40 Related documents: EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for clas

36、s B single-mode fibres (IEC 60793-2-50) EN 61753-1 Fibre optic interconnecting devices and passive components Part 1: General and guidance for performance standard (IEC 61753-1) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 6130

37、0 series) Shape Maximum outline dimensions Width: 150 mm Height: 210 mm Depth: 60 mm BS EN 50411-3-5:2015EN 50411-3-5:2015 5 1 Scope 1.1 Product definition This European Standard covers wall outlets for up to 4 SC foot-print adapters. Various connector types (e.g. SC, LC) can be implemented as long

38、as the adapter fits in the SC foot-print dimensions. A Wall Outlet is the passive end connection point of a fixed Single Mode fibre based FTTH network to the flexible network of service unit (CPE, ONT) indoor. Products defined by IEV 442-08-02 or IEV 723-09-22 can be considered as Wall Outlets. SI o

39、r ENTI are not part of this wall outlet specification. This specification also covers the possibility of using hybrid (fibre/copper) wall outlets with 1 RJ-45 footprint. Performance of copper cabling and connectivity is not in the scope of this document, but should be verified in line with EN 50346.

40、 Wall outlets are placed in end user premises by installers and the contents are not intended to be user accessible. Wall outlets may be mounted using a number of techniques: surface mounted on a wall, patress boxes, trunking or raceway; flush mounted or between cable trunking. Cable entry points va

41、ry with mounting method: surface mounted or flush mounted boxes may require large holes at the rear of the wall outlet for cable entry requiring little or no strain relief, whereas boxes with cable entry visible to the end user will need cable sealing and strain relief. Wall outlets covered in the p

42、roduct specification will include a fibre management system (FMS) for managing the incoming cables or fibres. The FMS may include trays for splicing pigtails to incoming cable/fibre. This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental perform

43、ance requirements of an optical fibre wall outlet, in order for it to be categorized as an European Standard product. 1.2 Operating environment The tests selected combined with the severity and duration is representative of indoor environments defined by: EN 61753-1 category C Controlled environment

44、 1.3 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognized reliability assessment programme. 1.4 Quality assurance Co

45、mpliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognized quality assurance programme. BS EN 50411-3-5:20154BS EN 50411-3-5:2015EN 50411-3-5:2015 4 Part 3-8: Fibre management system, terminal equipment box type 1 fo

46、r category C currently at Formal Vote stage; Part 6-1: Unprotected microduct for category S and A. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such pa

47、tent rights. Fibre organisers and closures to be used in optical fibre communication systems Product specifications Part 3-5: Fibre management system, FTTH wall outlet, for category C Description Performance Construction: Wall /Flush/Trunking mounted outlet Cable Fixing: Mechanical Connector: EN 503

48、77 series EN 60603-7 series Fibre types: EN 60793-2-50, B1 and B6 Fibre management: Integrated in wall outlet Applications: Fibre line termination in FTTH networks for indoor controlled environments EN 61753-1 Category C Sealing performance: IP 40 Related documents: EN 60529 Degrees of protection pr

49、ovided by enclosures (IP Code) (IEC 60529) EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 61753-1 Fibre optic interconnecting devices and passive components Part 1: General and guidance for performance standard (IEC 61753-1) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) Shape Maximum outline dimen