EN 50463-3-2017 en Railway applications - Energy measurement on board trains - Part 3 Data handling.pdf

1、Railway applications - Energy measurement on board trainPart 3: Data handlingBS EN 504633:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50463-3 October 2017 ICS 45.060.10 Supersedes EN 50463-3:2012English Ver

2、sion Railway applications - Energy measurement on board trains - Part 3: Data handling Applications ferroviaires - Mesure dnergie bord des trains - Partie 3 : Traitement des donnes Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Daten-Behandlung This European Standard was approved by C

3、ENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand

4、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own languag

5、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

6、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen d

7、e Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50463-3:2017 ENational forewordT

8、his British Standard is the UK implementation of EN 504633:2017. It supersedes BS EN 504633:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/9, Railway Electrotechnical Applications.A list of organizations represented on this committee can be

9、obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91505 5ICS 45.060.10Compliance

10、 with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 504633:2017EUROPEAN S

11、TANDARD NORME EUROPENNE EUROPISCHE NORM EN 50463-3 October 2017 ICS 45.060.10 Supersedes EN 50463-3:2012English Version Railway applications - Energy measurement on board trains - Part 3: Data handling Applications ferroviaires - Mesure dnergie bord des trains - Partie 3 : Traitement des donnes Bahn

12、anwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Daten-Behandlung This European Standard was approved by CENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nati

13、onal standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A

14、version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulga

15、ria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

16、Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitatio

17、n in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50463-3:2017 EBS EN 504633:2017EN 50463-3:2017 (E) 2 Contents Page European foreword 6 Introduction 7 1 Scope 10 2 Normative references 10 3 Terms, definitions and abbreviations . 10 3.1 Terms and definitions . 10 3.2

18、 Abbreviations 12 4 Requirements 12 4.1 General . 12 4.2 Time data 13 4.2.1 Source . 13 4.2.2 Reference time source 13 4.2.3 Content 13 4.2.4 Resolution . 13 4.2.5 Stability . 13 4.2.6 Synchronization . 13 4.2.7 Quality code for time data . 13 4.3 Energy data 14 4.3.1 Source . 14 4.3.2 Type . 14 4.3

19、.3 Format . 14 4.3.4 Index value overrun . 14 4.3.5 Merging with time data 14 4.3.6 Quality codes for energy data 14 4.3.7 k-factor 15 4.3.8 Accuracy . 15 4.3.9 Transmission from EMF 15 4.4 Location data . 15 4.4.1 Source . 15 4.4.2 Format . 16 4.4.3 Merging with time data 16 4.4.4 Accuracy . 16 4.4

20、.5 Quality codes for location data 16 BS EN 504633:2017EN 50463-3:2017 (E) 3 4.5 Other received or produced data . 17 4.5.1 Types . 17 4.5.2 Data handling prioritization 17 4.5.3 Time tag 17 4.6 Consumption point ID (CPID) . 17 4.7 Production of CEBD 17 4.7.1 General 17 4.7.2 Type of Data 17 4.7.3 T

21、ime Reference Period 17 4.7.4 Energy data . 18 4.7.5 Location data 18 4.7.6 Missing input data . 18 4.7.7 Data integrity 18 4.7.8 Quality codes 19 4.7.9 Traction system code 19 4.8 DHS data storage 19 4.8.1 Storage periods 19 4.8.2 Memory Capacity . 19 4.9 Transmission of CEBD from DHS to DCS. 20 4.

22、9.1 General 20 4.9.2 Type of info . 20 4.9.3 Time between each transfer 20 4.9.4 Binding to a DCS 20 4.10 Marking and essential information 20 4.10.1 Marking of the DHS 20 4.10.2 Essential information 20 4.11 Event recording . 21 4.11.1 General 21 4.11.2 Type of events 21 4.12 DCS . 22 4.12.1 Genera

23、l 22 4.12.2 Reception of CEBD from DHS 22 4.12.3 Request to DHS for CEBD data 22 4.12.4 Storage of CEBD 22 4.12.5 Export of CEBD from DCS 22 4.12.6 Binding the communication with the EMS 22 4.12.7 EMS discovery 22 BS EN 504633:2017EN 50463-3:2017 (E) 4 5 Conformity assessment . 22 5.1 General . 22 5

24、.1.1 Introduction 22 5.1.2 Applicability 23 5.1.3 Methodology . 23 5.2 Testing framework 23 5.2.1 General 23 5.2.2 Reporting 24 5.3 Design review 25 5.3.1 General 25 5.3.2 Interfaces 25 5.3.3 Access control . 25 5.3.4 Software 25 5.3.5 RAMS . 25 5.3.6 Internal clock 25 5.3.7 Location data source . 2

25、5 5.3.8 DHS priorities . 25 5.3.9 Transmission of CEBD to DCS . 25 5.3.10 Dataflow security . 25 5.3.11 Event logs . 26 5.4 Type testing . 26 5.4.1 General 26 5.4.2 Visual inspection 26 5.4.3 Environmental testing . 26 5.4.4 Mechanical testing . 27 5.4.5 Electrical testing 27 5.4.6 Access control .

26、28 5.4.7 Interfaces 29 5.4.8 Functional testing 29 5.5 Routine testing 35 5.5.1 General 35 5.5.2 Visual inspection 35 5.5.3 Check of marking . 35 5.5.4 Functional testing 35 5.5.5 Insulation test . 35 5.6 DCS conformity assessment . 35 5.6.1 General 35 BS EN 504633:2017EN 50463-3:2017 (E) 5 5.6.2 De

27、sign review . 35 5.6.3 Functional Testing . 35 Annex ZZ (informative) Relationship between this European Standard and the Essential Requirements of Directive 2008/57/EC . 37 Bibliography 38 Figures Figure 1 EMS functional structure and dataflow diagram 9 Figure 2 Example of energy index value . 11 T

28、ables Table 1 Time data quality codes . 13 Table 2 Energy data quality codes . 15 Table 3 Location data format 16 Table 4 Location data quality codes 16 Table 5 Traction system codes 19 Table ZZ.1 Correspondence between this European Standard, the TSI “Locomotives and Passenger Rolling Stock” (REGUL

29、ATION (EU) No 1302/2014 of 18 November 2014) and Directive 2008/57/EC amended by Directive 2011/18/EU 37 Table ZZ.2 Correspondence between this European Standard, the TSI “Energy” (REGULATION (EU) No 1301/2014 of 18 November 2014) and Directive 2008/57/EC amended by Directive 2011/18/EU 37 BS EN 504

30、633:2017EN 50463-3:2017 (E) 6 European foreword This document (EN 50463-3:2017) has been prepared by CLC/TC 9X “Electrical and electronic applications for railways”. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identic

31、al national standard or by endorsement (dop) 2018-04-06 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-10-06 This document supersedes EN 50463-3:2012. EN 50463-3 includes the following significant technical changes with respect to EN 50463-

32、3:2012: updated requirements for DCS, CEBD, quality codes and logs (Clause 4). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has

33、been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. This document is

34、Part 3 of the EN 50463 series which consists of the following parts, under the common title Railway applications Energy measurement on board trains: Part 1: General; Part 2: Energy measuring; Part 3: Data handling; Part 4: Communication; Part 5: Conformity assessment. This series of European Standar

35、ds follows the functional guidelines description in EN ISO/IEC 17000:2004, Annex A “Principles of conformity assessment”, tailored to the Energy Measurement System (EMS). The requirements for Energy Measurement Systems in the relevant Technical Specifications for Interoperability are supported by th

36、is series of European Standards. BS EN 504633:2017EN 50463-3:2017 (E) 7 Introduction The Energy Measurement System provides measurement and data suitable for billing and may also be used for energy management, e.g. energy saving. This series of European Standards uses the functional approach to desc

37、ribe the Energy Measurement System and on-ground Data Collection Service. These functions are implemented in one or more physical devices. The user of this series of standards is free to choose the physical implementation arrangements. a) Structure and main contents of the EN 50463 series: This seri

38、es of European Standards is divided into five parts. The titles and brief descriptions of each part are given below: 1) EN 50463-1 General: The scope of EN 50463-1 is the Energy Measurement System (EMS). EN 50463-1 provides system level requirements for the complete EMS and common requirements for a

39、ll devices implementing one or more functions of the EMS. 2) EN 50463-2 Energy measuring: The scope of EN 50463-2 is the Energy Measurement Function (EMF). The EMF provides measurement of the consumed and regenerated active energy of a railway traction unit. If the traction unit is designed for use

40、on AC traction systems the EMF also provides measurement of reactive energy. The EMF provides the measured quantities via an interface to the Data Handling System. The EMF consists of the three functions: Voltage Measurement Function, Current Measurement Function and Energy Calculation Function. For

41、 each of these functions, accuracy classes are specified and associated reference conditions are defined. EN 50463-2 also defines all specific requirements for all functions of the EMF. The Voltage Measurement Function measures the voltage of the Contact Line system and the Current Measurement Funct

42、ion measures the current taken from and returned to the Contact Line system. These functions provide signal inputs to the Energy Calculation Function. The Energy Calculation Function inputs the signals from the Current and Voltage Measurement Functions and calculates a set of values representing the

43、 consumed and regenerated energies. These values are transferred to the Data Handling System and are used in the creation of Compiled Energy Billing Data (CEBD). The standard has been developed taking into account that in some applications the EMF may be subjected to legal metrological control. All

44、relevant metrological aspects are covered in EN 50463-2. EN 50463-2 also defines the conformity assessment of the EMF. 3) EN 50463-3 Data handling: The scope of EN 50463-3 is the Data Handling System (DHS) and the associated requirements of Data Collecting System (DCS). BS EN 504633:2017EN 50463-3:2

45、017 (E) 8 The on board DHS receives, produces and stores data, ready for transmission to any authorized receiver of data onboard or on ground. The main goal of the DHS is to produce Compiled Energy Billing Data (CEBD) and transfer it to an on ground Data Collecting System (DCS). The DHS can support

46、other functionality on board or on ground with data (e.g. for energy management, driver advisory systems, etc.), as long as this does not conflict with the main goal. The DCS on-ground receives Compiled Energy Billing Data and transfer it to settlement system. EN 50463-3 also defines the conformity

47、assessment of the DHS and for the transfer of CEBD to an on-ground Data Collecting System (DCS). 4) EN 50463-4 Communication: The scope of EN 50463-4 is the communication services. This part of EN 50463 gives requirements and guidance regarding the data communication between the functions implemente

48、d within EMS as well as between such functions and other on board units where data are exchanged using a communications protocol stack over a dedicated physical interface or a shared network. It includes the reference to the on board to ground communication service and covers the requirements necess

49、ary to support data transfer between DHS and DCS including the transfer of CEBD on an interoperable basis. EN 50463-4 also defines the conformity assessment of the communications services. 5) EN 50463-5 Conformity assessment: The scope of EN 50463-5 is the conformity assessment procedures for the EMS. EN 50463-5 also covers re-verification procedures and conformity assessment in the event of the replacement of a device of the EMS. b) EMS functional structure and dataflow: Figure 1 illustrates the functional s