EN 50463-5-2017 en Railway applications - Energy measurement on board trains - Part 5 Conformity assessment.pdf

1、Railway applications - Energy measurement on board trainsPart 5: Conformity assessmentBS EN 504635:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50463-5 October 2017 ICS 45.060.10 Supersedes EN 50463-5:2012En

2、glish Version Railway applications - Energy measurement on board trains - Part 5: Conformity assessment Applications ferroviaires - Mesure dnergie bord des trains - Partie 5 : Evaluation de la conformit Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 5: Konformittsbewertung This European

3、Standard was approved by CENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references conc

4、erning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

5、ember into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

6、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Stand

7、ardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50463-

8、5:2017 ENational forewordThis British Standard is the UK implementation of EN 504635:2017. It supersedes BS EN 504635:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/9, Railway Electrotechnical Applications.A list of organizations represented

9、 on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 9150

10、7 9ICS 45.060.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDB

11、S EN 504635:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50463-5 October 2017 ICS 45.060.10 Supersedes EN 50463-5:2012English Version Railway applications - Energy measurement on board trains - Part 5: Conformity assessment Applications ferroviaires - Mesure dnergie bord des trains - Par

12、tie 5 : Evaluation de la conformit Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 5: Konformittsbewertung This European Standard was approved by CENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

13、this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three offi

14、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotech

15、nical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,

16、Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brus

17、sels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50463-5:2017 EBS EN 504635:2017EN 50463-5:2017 (E) 2 Contents Page European foreword 4 Introduction 5 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbrevia

18、tions 8 3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Conformity assessment approach . 10 4.1 General 10 4.2 Situation of applicability 10 4.3 General Methodology . 10 4.4 EMS Specific Methodology . 12 4.4.1 General . 12 4.4.2 EMS integration design review 12 4.4.3 EMS integration type test . 12

19、 4.4.4 EMS installation design review . 12 4.4.5 EMS installation type test 12 4.4.6 EMS installation routine test . 12 4.4.7 EMS periodic re-verification 12 4.4.8 Replacement of devices and ancillary components . 12 5 Conformity assessment procedures 12 5.1 General 12 5.2 EMS integration design rev

20、iew . 13 5.2.1 EMS integration design review documentation . 13 5.2.2 EMS integration design review assessment 13 5.2.3 Integration Design Review Report (IDRR) 13 5.3 EMS integration type test 14 5.3.1 General . 14 5.3.2 Integration type test procedure . 14 5.3.3 Integration type tests 14 5.3.4 Inte

21、gration Type Test Report (ITTR) . 15 5.4 EMS installation design review . 15 5.4.1 EMS installation design review documentation 15 5.4.2 EMS installation design review assessment . 15 5.4.3 Installation Design Review Report (SDRR) 16 5.5 EMS Installation type test 16 5.5.1 General . 16 5.5.2 Install

22、ation procedure 16 5.5.3 Installation type test procedure 16 BS EN 504635:2017EN 50463-5:2017 (E) 3 5.5.4 Installation type tests . 17 5.5.5 Installation Type Test Report (STTR) 17 5.6 EMS installation routine test . 17 5.6.1 General . 17 5.6.2 Installation routine test procedure 18 5.6.3 Routine te

23、sts . 18 5.6.4 Installation Routine Test Report (IRTR) 19 5.7 Periodic re-verification 19 5.7.1 Procedure 19 5.7.2 Re-verification Report (RVR) . 20 5.8 Replacement of devices and ancillary components . 20 5.8.1 General . 20 5.8.2 Documentation 21 5.8.3 Item replacement conformity assessment . 22 5.

24、8.4 Software . 22 5.8.5 Programmable parameters 22 5.8.6 Replacement report 22 Annex ZZ (informative) Relationship between this European Standard and the Essential Requirements of Directive 2008/57/EC 23 Bibliography . 24 Figures Figure 1 EMS functional structure and dataflow diagram 7 Figure 2 Meth

25、ods of conformity assessment 11 Figure 3 Overview of EMS installation routine test process 18 Figure 4 Replacement of devices and ancillary components 21 BS EN 504635:2017EN 50463-5:2017 (E) 4 European foreword This document (EN 50463-5:2017) has been prepared by CLC/TC 9X “Electrical and electronic

26、 applications for railways”. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-06 latest date by which the national standards conflicting with this document have t

27、o be withdrawn (dow) 2020-10-06 This document supersedes EN 50463-5:2012. EN 50463-5:2017 includes the following significant technical changes with respect to EN 50463-5:2012: no technical changes introduced in document; only the introduction has been updated in order to keep consistency in the five

28、 parts of the revised version of the EN 50463 series. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative

29、 Annex ZZ, which is an integral part of this document. This document is Part 5 of the EN 50463 series which consists of the following parts, under the common title Railway applications Energy measurement on board trains: Part 1: General; Part 2: Energy measuring; Part 3: Data handling; Part 4: Commu

30、nication; Part 5: Conformity assessment. This series of European Standards follows the functional guidelines description in EN ISO/IEC 17000:2004, Annex A “Principles of conformity assessment”, tailored to the Energy Measurement System (EMS). The requirements for Energy Measurement Systems in the re

31、levant Technical Specifications for Interoperability are supported by this series of European Standards. BS EN 504635:2017EN 50463-5:2017 (E) 5 Introduction The Energy Measurement System provides measurement and data suitable for billing and may also be used for energy management, e.g. energy saving

32、. This series of European Standards uses the functional approach to describe the Energy Measurement System and on-ground Data Collection Service. These functions are implemented in one or more physical devices. The user of this Series of standards is free to choose the physical implementation arrang

33、ements. a) Structure and main contents of the EN 50463 series: This series of European Standards is divided into five parts. The titles and brief descriptions of each part are given below: 1) EN 50463-1 General: The scope of EN 50463-1 is the Energy Measurement System (EMS). EN 50463-1 provides syst

34、em level requirements for the complete EMS and common requirements for all devices implementing one or more functions of the EMS. 2) EN 50463-2 Energy measuring: The scope of EN 50463-2 is the Energy Measurement Function (EMF). The EMF provides measurement of the consumed and regenerated active ener

35、gy of a traction unit. If the traction unit is designed for use on AC traction systems, the EMF also provides measurement of reactive energy. The EMF provides the measured quantities via an interface to the Data Handling System. The EMF consists of the three functions: Voltage Measurement Function,

36、Current Measurement Function and Energy Calculation Function. For each of these functions, accuracy classes are specified and associated reference conditions are defined. This part also defines all specific requirements for all functions of the EMF. The Voltage Measurement Function measures the volt

37、age of the CL system and the Current Measurement Function measures the current taken from and returned to the CL system. These functions provide signal inputs to the Energy Calculation Function. The Energy Calculation Function inputs the signals from the Current and Voltage Measurement Functions and

38、 calculates a set of values representing the consumed and regenerated energies. These values are transferred to the Data Handling System and are used in the creation of Compiled Energy Billing Data (CEBD). The standard has been developed taking into account that in some applications, the EMF may be

39、subjected to legal metrological control. All relevant metrological aspects are covered in this part of EN 50463. EN 50463-2 also defines the conformity assessment of the EMF. 3) EN 50463-3 Data handling: The scope of EN 50463-3 is the Data Handling System (DHS) and the associated requirements of Dat

40、a Collecting System (DCS). The on board DHS receives, produces and stores data, ready for transmission to any authorized receiver of data on board or on ground. The main goal of the DHS is to produce Compiled Energy BS EN 504635:2017EN 50463-5:2017 (E) 6 Billing Data and transfer it on an interopera

41、ble basis to an on-ground Data Collecting System (DCS). The DHS can support other functionality on board or on-ground with data, as long as this does not conflict with the main goal. The DCS on-ground receives Compiled Energy Billing Data and transfer it to settlement system. EN 50463-3 also defines

42、 the conformity assessment of the DHS and for the transfer of CEBD to an on-ground Data Collecting System (DCS). 4) EN 50463-4 Communication: The scope of EN 50463-4 is the communication services. This part of EN 50463 gives requirements and guidance regarding the data communication between the func

43、tions implemented within EMS as well as between such functions and other on board units where data are exchanged using a communications protocol stack over a dedicated physical interface or a shared network. It includes the on board to ground communication service and covers the requirements necessa

44、ry to support data transfer between DHS and DCS including the transfer of CEBD on an interoperable basis. EN 50463-4 also defines the conformity assessment of the communications services. 5) EN 50463-5 Conformity assessment: The scope of EN 50463-5 is the conformity assessment procedures for the EMS

45、. EN 50463-5 also covers re-verification procedures and conformity assessment in the event of the replacement of a device of the EMS. b) EMS functional structure and dataflow: Figure 1 illustrates the functional structure of the EMS, the main sub-functions and the structure of the dataflow and is in

46、formative only. Only the main interfaces required by this standard are displayed by arrows. Since the communication function is distributed throughout the EMS, it has been omitted for clarity. Not all interfaces are shown. BS EN 504635:2017EN 50463-5:2017 (E) 7 Figure 1 EMS functional structure and

47、dataflow diagram BS EN 504635:2017EN 50463-5:2017 (E) 8 1 Scope This European Standard specifies the conformity assessment arrangements for newly manufactured EMS installed on a traction unit. This includes the integration conformity assessment and installation conformity assessment. In addition, th

48、is document also specifies the conformity assessment procedures for device and ancillary component replacement (e.g. due to damage in service), and periodic check to verify the EMS conformity assessment remains valid. This European Standard does not include elements related to conformity assessment

49、aspects other than design review and testing provisions for the products, processes or services specified. Consequently, this part does not delete, change or interpret the general requirements for conformity assessment procedures and vocabulary detailed in EN/ISO/IEC 17000. This European Standard does not cover the conformity assessment schemes that, according to the CEN-CENELEC Internal Regulations, are the responsibility of ISO policy committee “Committee on conformity assessment” (ISO/CASCO). 2 Normative referen