EN 50636-2-92-2014 en Household and similar electrical appliances - Safety - Part 2-92 Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators.pdf

1、BSI Standards PublicationBS EN 50636-2-92:2014Household and similarelectrical appliances SafetyPart 2-92: Particular requirements forpedestrian-controlled mains-operated lawnscarifiers and aeratorsBS EN 50636-2-92:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation o

2、f EN50636-2-92:2014. It supersedes BS EN 60335-2-92:2005 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can beobtained on request to its secretary.Thi

3、s publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 72077 2ICS 65.060.70; 97.030Compliance with a British Standard cannot co

4、nfer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2014.Amendments issued since publicationDate Text affectedBS EN 50636-2-92:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50636-2-92 June 201

5、4 ICS 65.060.70 Supersedes EN 60335-2-92:2005 English Version Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators Appareils lectrodomestiques et analogues - Scurit - Partie 2-92: Rgles particu

6、lires pour les scarificateurs de gazon et les arateurs fonctionnant sur le rseau et pour conducteur pied Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-92: Besondere Anforderungen fr handgefhrte netzbetriebene Rasen-Vertikutierer und Rasen-Lfter This European Standard

7、was approved by CENELEC on 2013-09-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s

8、uch national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

9、to its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

10、Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit

11、 Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50636-2-92:2014 E BS E

12、N 50636-2-92:2014EN 50636-2-92:2014 2 Contents Page Foreword . 4 Introduction . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions 8 4 General requirement .10 5 General conditions for the tests 10 6 Classification .11 7 Marking and instructions .11 8 Protection against access to live p

13、arts 14 9 Starting of motor-operated appliances 14 10 Power input and current 14 11 Heating .15 12 Void 15 13 Leakage current and electric strength at operating temperature 15 14 Transient overvoltages 15 15 Moisture resistance 15 16 Leakage current and electric strength .15 17 Overload protection o

14、f transformers and associated circuits .15 18 Endurance .15 19 Abnormal operation 16 20 Stability and mechanical hazards .16 21 Mechanical strength .23 22 Construction 24 23 Internal wiring .25 24 Components 25 25 Supply connection and external flexible cords .26 26 Terminals for external conductors

15、27 27 Provision for earthing 27 28 Screws and connections 27 29 Clearances, creepage distances and solid insulation 27 30 Resistance to heat and fire 27 31 Resistance to rusting .27 32 Radiation, toxicity and similar hazards 27 Annex AA (normative) Safety signs and symbols .39 Annex BB (informative)

16、 Safety Instructions .42 BS EN 50636-2-92:2014 3 EN 50636-2-92:2014 Annex CC (normative) Vibration .45 Annex DD (normative) Noise test code Engineering method (grade 2) .50 Annex EE (informative) Example of a material and construction fulfilling the requirements for an artificial surface .56 Annex F

17、F (normative) Base .58 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives .60 Bibliography 61 Figures Figure 101 Safety distances Machines with more than one axle 28 Figure 102 Safety distances Single axle machines . 29 Figure 103 Foot probe 30 Figure 104 Strength of tine ass

18、embly . 31 Figure 105 Operator zone . 32 Figure 106 Front and rear guarding of tines . 33 Figure 107 Side guarding of tines . 34 Figure 108 Guarding of rear discharge machines 35 Figure 109 Guarding of front discharge machines . 36 Figure 110 Thrown object test rig for rear discharge scarifiers with

19、 rigid tines 37 Figure 111 Impact test fixture for handle insulation 38 Figure AA.1 “Read operators manual” . 39 Figure AA.2 “Keep bystanders away” . 40 Figure AA.3 “WARNING Beware of sharp tines, keep fingers and toes away. Remove plug from mains before maintenance, adjusting, cleaning or if the co

20、rd is entangled or damaged. Tines continue to rotate after the motor is switched off” . 40 Figure AA.4 “Keep supply flexible cord away from tines” . 41 Figure CC.1 Examples of transducer location/orientation 47 Figure CC.2 Examples of transducer location/orientation for hand-arm vibration . 48 Figur

21、e DD.1 Microphone positions on the hemisphere (see Table DD.1) 51 Figure EE.1 Sketch of the measurement surface covered with an artificial surface (not to scale) 57 Figure FF.1 Base detail. 58 Figure FF.2 Nail plan of base . 59 Tables Table DD.1 Co-ordinates of microphone positions . 52 Table DD.2 A

22、bsorption coefficients 53 BS EN 50636-2-92:2014EN 50636-2-92:2014 4 Foreword This document (EN 50636-2-92:2014) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“. The following dates are fixed: latest date by which this document has to be implemented at national level by publ

23、ication of an identical national standard or by endorsement (dop) 2014-12-20 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-09-02 This document supersedes EN 60335-2-92:2005. EN 60335-2-92:2014 includes the following significant technical c

24、hanges: rewording of some clauses; alignment to the European Machinery Directive 2006/42/EC; alignment to EN 60335-1:2012. This document is to be used in conjunction with EN 60335-1:2012 “Household and similar electrical appliances Safety Part 1: General requirements”. When “Part 1” is mentioned in

25、this standard, it refers to EN 60335-1:2012. This document supplements or modifies the corresponding clauses in Part 1, so as to convert that publication into the European Standard “Particular requirements for pedestrian-controlled walk-behind mains operated scarifiers and aerators”. Where a particu

26、lar subclause of Part 1 is not mentioned in this document, that subclause applies as far as is relevant. Where this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. Compliance with the relevant clauses of Part 1 together with this

27、 document provides one means of conforming to the specified essential health and safety requirements of the Directive. This European Standard follows the overall requirements of EN ISO 12100. Warning: Other requirements arising from other EU Directives can be applicable to the products falling withi

28、n the scope of this European Standard. The following numbering system is used: subclauses , notes, tables and figures that are numbered starting from 101 are additional to those in Part 1; additional annexes are lettered AA, BB, etc.; Note In this European Standard the following print types are used

29、: - requirements proper: in roman type; - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Common modifications are ind

30、icated by a vertical line in the left margin of the text. BS EN 50636-2-92:2014 5 EN 50636-2-92:2014 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such

31、patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of

32、 this document. BS EN 50636-2-92:2014EN 50636-2-92:2014 6 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered is as indicated in the scope of this document. When provisions of

33、this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the other standards, for machines which have been built and designed to the provisions of this type C standard. BS EN 50636-2-92:2014 7 EN 50636-2-92:2

34、014 1 Scope This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled walk-behind mains operated scarifiers and aerators, hereinafter referred to as machine(s), which are de

35、signed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. This standard applies in conjunction with Part 1. NOTE 1 Lawn scarifiers are also known as lawn rakes. This European Standard

36、 does not apply to non-powered scarifiers and aerators, battery powered scarifiers and aerators, vertical axis scarifiers and aerators or those aerators which cut into the soil by means of a reciprocating motion and ride-on machines. This European Standard does not apply to lawnmowers (EN 60335-2-77

37、); lawn trimmers (EN 60335-2-91); lawn edge trimmers (EN 60335-2-91); lawn edgers, flail mowers, sickle-bar mowers or agricultural mowers. This European Standard is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document. This European Standard de

38、als with all the significant hazards presented by pedestrian-controlled lawn scarifiers and lawn aerators when they are used as intended and under conditions of misuse which are reasonably foreseeable. NOTE 2 Combustion engine machines are covered by EN 13684. 2 Normative references This clause of P

39、art 1 is applicable except as follows. Addition: EN 60335-1:2012, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2010, modified) EN ISO 354:1993, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 2758:2003, Paper Det

40、ermination of bursting strength (ISO 2758:2001) EN ISO 3744:2010, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 4871:2009, Acoustics Declarat

41、ion and verification of noise emission values of machinery and equipment (ISO 4871:1996) BS EN 50636-2-92:2014EN 50636-2-92:2014 8 EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions

42、in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13857:2008, Safety of machinery Safety distances to prevent

43、hazard zones being reached by upper and lower limbs (ISO 13857:2008) EN ISO 20643:2008; Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission (ISO 20643:2005) 3 Terms and definitions This clause of Part 1 is applicable except as follows. 3.1.9 Repla

44、cement: 3.1.9 normal operation operation of the machine under the following conditions: the machine is operated at rated voltage with the load necessary to attain rated power input Addition: 3.101 braking system combination of one or more brakes and related means of operation and control 3.102 catch

45、er part or combination of parts which provides a means for collecting grass, thatch, moss or other debris 3.103 control means or device which will control the operation of the machine or any specific operating function thereof 3.104 discharge chute extension of the tine enclosure from the discharge

46、opening, generally used to control the discharge of material from the tines 3.105 discharge opening gap or opening in the tine enclosure through which grass, thatch, moss and other debris may be discharged. a) front discharge denotes throwing out grass, thatch and moss so that they will be collected

47、 in a catcher which is located in front of the tines b) rear discharge denotes throwing out grass, thatch and moss so that they will be collected in a catcher which is located behind the tines BS EN 50636-2-92:2014 9 EN 50636-2-92:2014 3.106 guard part of the machine or component incorporated to pro

48、vide protection for the operator and/or bystander by means of a physical barrier 3.107 handle any part likely to be hand-held for guiding the machine in normal use 3.108 hit test projectile passing completely through all layers of the target material 3.109 intended use any use of the machine which i

49、s reasonably foreseeable, as described in the user instructions, and which is consistent with such activities as operating, starting, stopping or connecting to (or disconnecting from) a mains supply 3.110 lawn aerator corer machine which uses the ground to determine the depth of cut, designed for penetrating the lawn surface 3.111 lawn scarifier machine designed to scratch the surface, or earth face thereby also combing the l