EN 60061-2-1993 en Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 Lampholders (Incorporates Amendment A50 2015)《具有可互换性和安全性控制的带.pdf

1、BRITISH STANDARD BS EN 60061-2:1993Lamp caps and holders together with gauges for the control of interchangeability and safetyPart 2: LampholdersICS 29.140.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g5

2、5g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A44:2012BS EN 60061-2:1993 +A45:2012+A47:2014BS EN +A50:2015BS EN 60061-2:1993+A50:2015ISBN 978 0 580 93183 3National forewordThis British Standard is the UK implementation of EN 60061-2:1993+A50:2015. It is derived from IEC 60061-2:1969, to

3、gether with supplements 2A to 2S, and amendments 18 to 50. It supersedes BS EN 60061-2:1993+A47:2014 which is withdrawn.NOTE There are no amendments A8 to A17 to EN 60061-2.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommitt

4、ee CPL/34/2, Lamp caps and holders.A list of organizations represented on the subcommittee can be obtained on request to its secretary.All pages of the IEC text are reproduced here. However, note that CENELEC common modifications apply and that they consist of the deletion of data sheets for non-Eur

5、opean lamp caps, holders and associated gauges (i.e. E11, E12 and E39).The numerical identification of the data sheets is achieved by the use of three numbers, which appear at the foot of each sheet, the significance of which is as follows.Amendments/corrigenda issued since publicationAmd. No. Date

6、Comments9695 November 1997 See national foreword10187 February 1999 See national foreword10582 December 1999 See national foreword11009 July 2001 See national foreword13244 27 May 2002 See national foreword14108 13 January 2003 See national foreword14570 30 September 2003 See national foreword14836

7、12 January 2004 See national foreword15486 15 April 2005 See national foreword30 June 2010 Implementation of IEC amendments 33:2005, 34:2006, 35:2006, 36:2007, 37:2008, 38:2009 and 39:2009 with the corresponding CENELEC endorsements A33:2005, A34:2006, A35:2007, A36:2007, A37:2008, A38:2009 and A39:

8、200931 May 2012 Implementation of IEC amendments 40:2010, 41:2010, 42:2011, 43:2011 and 44:2011 with the corresponding CENELEC endorsements A40:2010, A41:2010, A42:2011, A43:2011 and A44:201230 June 2013 Implementation of IEC amendment 45:2012 with CENELEC endorsement A45:201231 May 2015 Implementat

9、ion of IEC amendments 46:2013 and 47:2014 with CENELEC endorsements A46:2013 and A47:201329 February 2016 Implementation of IEC amendments 48:2014, 49:2015 and 50:2015 with CENELEC endorsements A48:2015, A49:2015 and A50:2015This British Standard, having been prepared under the direction of the Elec

10、trotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1997 The British Standards Institution 2016. Published by BSI Standards Limited 2016First published July 1993 Second edition May 1997 The following BSI references relate to work on thi

11、s standard: Committee reference CPL/34/2 Special announcement in Update Standards, February 1997BS EN 60061-2:1993+A44:2012iThe part of BS EN 60061 in which they appear is identified by the first number, i.e.7004 Part 1 /DPSFDSV7005 Part 2 /DPSKROGHUV7006 Part 3 *DXJHV7007 Part 4 *XLGHOLQHVDQGJHQHUD

12、OLQIRUPDWLRQThe sequence, which may not be continuous, in which data sheets appear is identified by the second number. The issue number of an individual data sheet is identified by the third number. For example, 7004-10-5 describes a B22 bayonet cap appearing in Part 1 of BS EN 60061, the current da

13、ta sheets being the fifth issue.The amendment by which each page of the International Standard was introduced is indicated by the shoulder heading at the top of the page (e.g. 60061-2 Amend. 28 CEI/IEC:2003), showing the amendment number and date of amendment. Where no extension appears, the page is

14、 part of the original International Standard.To facilitate reproduction, pages from IEC 60061-2 containing dual language text have been used in the production of this part of BS EN 60061.This publication does not purport to include all the necessary provisions of a contract. Users are responsible fo

15、r its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60061-2:1993+A45:2012i The British Standards Institution 2013BS EN 60061-2:1993+A47:2014 The British Standards Institution 2015BS EN 60061-2:1993+A50:20153 The British Standards Institut

16、ion 2016This page deliberately set blankThis page deliberately set blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 60061-2:1993AUDC 621.316.58.032.8 : 621.753. 3ICS 29.140.10Supersedes HD 65.2 S1 : 1978Descriptors: lighting equipment, lampholder, interchangeability, safetyEnglish versionLam

17、p caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders(includes amendments A1 : 1995, A2 : 1995, A3 : 1995, A4 : 1996, A5 : 1996, A6 : 1996, A7 : 1997, A18 : 1998, A19 : 1999, A20 : 1999, A21 : 2000, A22 : 2001, A23 : 2001, A24 : 2001, A25 : 2002

18、, A26 : 2002, A27 : 2002, A28 : 2003, A29 : 2003 , A30 : 2003, A31 : 2004, A32 : 2005, A33:2005, A34:2006, A35:2007, A36:2007, A37:2008, A38:2009, A39:2009(IEC 60061-2 : 1969 + supplements A : 1970 to S : 1997 + A18 : 1998 + A19 : 1999 + A20 : 1999 + A21 : 2000 + A22 : 2001 + A23 : 2001 + A24 : 2001

19、 + A25 : 2002 + A26 : 2002 + A27 : 2002 + A28 : 2003 + A29 : 2003 + A30 : 2003, + A31 : 2004, +A32 : 2005: + A33:2005 +A34:2006 + A35:2006 +A36:2007 + A37:2008 +A38:2009 + A39:2009Culots de lampes et douilles ainsi que calibres pour le contrle de linterchangeabilit et de la scurit Deuxime partie: Do

20、uilles Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit Teil 2: Lampenfassungen This European Standard was approved by CENELEC on 1993-03-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv

21、ing this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official ve

22、rsions (English, French, German). A version in any other language made by translation under the re-sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees

23、of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit

24、Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60061-1 : 1993 + A42:200944February 2012, A40:2010, A41:2010, A42:2011, A43:2011 and A44:2012) + A

25、40:2010 + A41:2010 + A42:2011 + A43:2011 + A44:2012 modified)EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 60061-2:1993AUDC 621.316.58.032.8 : 621.753. 3ICS 29.140.10Supersedes HD 65.2 S1 : 1978Descriptor : lighting equipment, lampholder, interchangeability, safetyEnglish ver ionLamp caps and

26、holders together with gauges for the control of interchangeability and safety Part 2: Lampholders(includes amendments A1 : 1995, A2 : 1995, A3 : 1995, A4 : 1996, A5 : 1996, A6 : 1996, A7 : 1997, A18 : 1998, A19 : 1999, A20 : 1999, A21 : 2000, A22 : 2001, A23 : 2001, A24 : 2001, A25 : 2002, A26 : 200

27、2, A27 : 2002, A28 : 2003, A29 : 2003 , A30 : 2003, A31 : 2004, A32 : 2005, A33:2005, A34:2006, A35:2007, A36:2007, A37:2008, A38:2009, A39:2009(IEC 60061-2 : 1969 + supplements A : 1970 to S : 1997 + A18 : 1998 + A19 : 1999 + A20 : 1999 + A21 : 2000 + A22 : 2001 + A23 : 2001 + A24 : 2001 + A25 : 20

28、02 + A26 : 2002 + A27 : 2002 + A28 : 2003 + A29 : 2003 + A30 : 2003, + A31 : 2004, +A32 : 2005: + A33:2005 +A34:2006 + A35:2006 +A36:2007 + A37:2008 +A38:2009 + A39:2009Culots de lampes et douilles ansi que calibres pour le contrle de linterchangeabilit et de la scurit Deuxime partie: Douilles Lampe

29、nsockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit Teil 2: Lampenfassungen This European Standard was approved by CENELEC on 1993-03-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur

30、opean Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (Engl

31、ish, French, German). A version in any other language made by translation under the re-sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria,

32、Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de N

33、ormalisation Electrotechnique Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60061-1 : 1993 + A42:200944February 2012, A40:2010, A41:2010, A42:2011, A43:2011 and A44:2012) + A40:2010 + A4

34、1:2010 + A42:2011 + A43:2011 + A44:2012 modified)EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 60061-2:1 93AUDC 621.316.58.032.8 : 621.753. 3ICS 29.140.10Supersedes HD 65.2 S1 : 1978Descriptors: lighting equipment, lampholder, interchangeability, safetyEnglish versionLamp caps and holders toge

35、ther with gauges for the control of interchangeability and safety Part 2: Lampholders(includes amendments A1 : 1995, A2 : 1995, A3 : 1995, A4 : 1996, A5 : 1996, A6 : 1996, A7 : 1997, A18 : 1998, A19 : 1999, A20 : 1999, A21 : 2000, A22 : 2001, A23 : 2001, A24 : 2001, A25 : 2002, A26 : 2002, A27 : 200

36、2, A28 : 2003, A29 : 2003 , A30 : 2003, A31 : 2004, A32 : 2005, A33:2005, A34:2006, A35:2007, A36:2007, A37:2008, A38:2009, A39:2009(IEC 60061-2 : 1969 + supplements A : 1970 to S : 1997 + A18 : 1998 + A19 : 1999 + A20 : 1999 + A21 : 2000 + A22 : 2001 + A23 : 2001 + A24 : 2001 + A25 : 2002 + A26 : 2

37、002 + A27 : 2002 + A28 : 2003 + A29 : 2003 + A30 : 2003, + A31 : 2004, +A32 : 2005: + A33:2005 +A34:2006 + A35:2006 +A36:2007 + A37:2008 +A38:2009 + A39:2009Culots de lampes et douilles ainsi que calibres pour le contrle de linterchangeabilit et de la scurit Deuxime partie: Douilles Lampensockel und

38、 -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit Teil 2: Lampenfassungen This European Standard was approved by CENELEC on 1993-03-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stand

39、ard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French

40、, German). A version in any other language made by translation under the re-sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Cz

41、ech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de Normalisatio

42、n Electrotechnique Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60061-1 : 1993 + A42:200944February 2012, A40:2010, A41:2010, A42:2011, A43:2011 and A44:2012) + A40:2010 + A41:2010 + A4

43、2:2011 + A43:2011 + A44:2012 modifie )EN 60061-2:1993+A45November 2012, A44:2012 and A45:2012)modified + A45:2012)EN 60061-2:1993+A47May 2014EN 60061-2:1993+A50December 2015Foreword This European Standard, based on the Interna-tional Standard IEC 61-2 : 1969 + supplements A : 1970 to K : 1992 along

44、with common modifications, was prepared by CENELEC Technical Committee TC 34 NOTE. IEC 61-2 : 1969 + supplements A: 1970 to G : 1983 were published as a consolidated edition. It was submitted to the CENELEC Unique Acceptance Procedure (UAP) in May 1992 and was approved by CENELEC as EN 60061-2 on 9

45、March 1993. This European Standard supersedes HD 65.2 SI : 1978. The following dates were fixed: latest date of publication of an identical national standard (dop) 1994-03-01 latest date of withdrawal of conflicting national standards (dow) 1994-03-01For products which have complied with HD 65.2 SI

46、: 1978 before 1994-03-01, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 1999-03-01. Foreword to amendment A1The text of the 11th supplement (IEC 61-2L : 1994) to the International Standard IEC 61-2 : 1969, pre-pared by SC 3

47、4B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment Al to EN 60061-2 : 1993 on 1994-12-06 without any modification. The following dates were fixed: latest date by which the amendment has to be

48、 implemented at national level by publication of an identical standard or by endorsement (dop) 1995-12-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 1995-12-01 Page 2EN 60061-2 : 1993/A2 : 1995For products which have complied with EN 60061-2 : 1993 before 1995-12-01, as shown by the man-ufacturer or by a certification body, this previous standard may continue to apply for production until 2000-12-01. Endorsement notice7KHWHWRIDPHQGPHQW1994WRWKH,QWHUQDWLRQDO6WDQGDUG,(&