EN 60154-4-2017 en Flanges for waveguides - Part 4 Relevant specifications for flanges for circular waveguides.pdf

1、Flanges for waveguidesPart 4: Relevant specifications for flanges for circular waveguides (IEC 60154-4:2017)BS EN 60154-4:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60154-4 July 2017 ICS 33.120.10 Supersed

2、es HD 129.4 S1:1977 English Version Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides (IEC 60154-4:2017) Brides pour guides dondes - Partie 4: Spcifications particulires applicables aux brides pour guides dondes circulaires (IEC 60154-4:2017) Flansche fr Ho

3、hlleiter - Teil 4: Allgemeine Anforderungen an Flansche fr Rundhohlleiter (IEC 60154-4:2017) This European Standard was approved by CENELEC on 2017-04-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th

4、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English,

5、French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Aust

6、ria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Sloven

7、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All ri

8、ghts of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60154-4:2017 E National forewordThis British Standard is the UK implementation of EN 60154-4:2017. It is identical to IEC 60154-4:2017.The UK participation in its preparation was entrusted to Techni

9、cal Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions

10、of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93325 7ICS 33.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published unde

11、r the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 601544:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60154-4 July 2017 ICS 33.120.10 Supersedes HD 129.4 S1:1977 English V

12、ersion Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides (IEC 60154-4:2017) Brides pour guides dondes - Partie 4: Spcifications particulires applicables aux brides pour guides dondes circulaires (IEC 60154-4:2017) Flansche fr Hohlleiter - Teil 4: Allgemeine

13、 Anforderungen an Flansche fr Rundhohlleiter (IEC 60154-4:2017) This European Standard was approved by CENELEC on 2017-04-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa

14、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in

15、 any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croat

16、ia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerlan

17、d, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any f

18、orm and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60154-4:2017 E BS EN 601544:2017EN 60154-4:2017 2 European foreword The text of document 46F/346A/CDV, future edition 2 of IEC 60154-4, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, wave

19、guides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60154-4:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identic

20、al national standard or by endorsement (dop) 2018-01-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-28 This document supersedes HD 129.4 S1:1977. Attention is drawn to the possibility that some of the elements of this document may be t

21、he subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60154-4:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliogra

22、phy, the following notes have to be added for the standards indicated: IEC 60153 NOTE Harmonized in HD 123 / EN 60153 series. IEC 60153-4 NOTE Harmonized as HD 123.4. ISO/IEC 17025:2005 NOTE Harmonized as EN ISO/IEC 17025:2005 (not modified). BS EN 601544:2017EN 60154-4:2017 2 European foreword The

23、text of document 46F/346A/CDV, future edition 2 of IEC 60154-4, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELE

24、C as EN 60154-4:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-28 latest date by which the national standards conflicting with the document have to be with

25、drawn (dow) 2020-07-28 This document supersedes HD 129.4 S1:1977. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of

26、the International Standard IEC 60154-4:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60153 NOTE Harmonized in HD 123 / EN 60153 series. IEC 60153-4 NOTE Ha

27、rmonized as HD 123.4. ISO/IEC 17025:2005 NOTE Harmonized as EN ISO/IEC 17025:2005 (not modified). EN 60154-4:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively ref

28、erenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common mod

29、ifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60154-1 2016 Flanges for waveguides - Part 1: General requirements

30、EN 60154-1 2016 BS EN 601544:2017This page deliberately left blank 2 IEC 60154-4:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General . 5 4.1 Standardized types . 5 4.2 Type designation 5 5 Mechanical requirements . 6 5.1 General requirements bot

31、h for assemblies and for unmounted flanges 6 5.1.1 Materials . 6 5.1.2 Locating holes . 6 5.1.3 Shank diameter of fixing bolts used for location . 6 5.1.4 Relation between shank and locating hole diameters . 6 5.1.5 Over-all dimensions and thickness of flanges 6 5.1.6 Surface roughness of contact ar

32、ea of contact flanges 6 5.1.7 Flatness of contact area 6 5.2 General requirements for assemblies 7 5.2.1 Positioning of the holes . 7 5.2.2 Perpendicularity of the contact area . 7 5.3 Additional requirements for unmounted flanges . 7 5.3.1 General . 7 5.3.2 Shape of aperture 7 5.3.3 Positioning of

33、the holes . 7 5.3.4 Ordering information 7 Annex A (normative) Dimensions of flanges for preferred waveguide sizes 8 Annex B (normative) Dimensions of flanges for both intermediate and preferred waveguide sizes . 10 Bibliography 17 Figure B.1 Flanges for waveguide size C 18 up to C 28.7 11 Figure B.

34、2 Flanges for waveguide size C 30 up to C 46.2 12 Figure B.3 TYPE F Flange for waveguide sizes C580 up to C 29000 14 Figure B.4 TYPE G Flange for waveguide sizes C580 up to C 29000 . 16 Table 1 Flatness of contact area 7 Table A.1 Dimensions of pressurizable type J flanges for circular waveguides (p

35、referred sizes) . 9 Table B.1 Dimensions of pressurizable type J flanges for circular waveguides (preferred and intermediate sizes) 13 2 IEC 60154-4:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General . 5 4.1 Standardized types . 5 4.2 Type desi

36、gnation 5 5 Mechanical requirements . 6 5.1 General requirements both for assemblies and for unmounted flanges 6 5.1.1 Materials . 6 5.1.2 Locating holes . 6 5.1.3 Shank diameter of fixing bolts used for location . 6 5.1.4 Relation between shank and locating hole diameters . 6 5.1.5 Over-all dimensi

37、ons and thickness of flanges 6 5.1.6 Surface roughness of contact area of contact flanges 6 5.1.7 Flatness of contact area 6 5.2 General requirements for assemblies 7 5.2.1 Positioning of the holes . 7 5.2.2 Perpendicularity of the contact area . 7 5.3 Additional requirements for unmounted flanges .

38、 7 5.3.1 General . 7 5.3.2 Shape of aperture 7 5.3.3 Positioning of the holes . 7 5.3.4 Ordering information 7 Annex A (normative) Dimensions of flanges for preferred waveguide sizes 8 Annex B (normative) Dimensions of flanges for both intermediate and preferred waveguide sizes . 10 Bibliography 17

39、Figure B.1 Flanges for waveguide size C 18 up to C 28.7 11 Figure B.2 Flanges for waveguide size C 30 up to C 46.2 12 Figure B.3 TYPE F Flange for waveguide sizes C580 up to C 29000 14 Figure B.4 TYPE G Flange for waveguide sizes C580 up to C 29000 . 16 Table 1 Flatness of contact area 7 Table A.1 D

40、imensions of pressurizable type J flanges for circular waveguides (preferred sizes) . 9 Table B.1 Dimensions of pressurizable type J flanges for circular waveguides (preferred and intermediate sizes) 13 BS EN 601544:2017IEC 60154-4:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FLANGES

41、FOR WAVEGUIDES Part 4: Relevant specifications for flanges for circular waveguides FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to pr

42、omote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guide

43、s (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC al

44、so participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as poss

45、ible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. Wh

46、ile all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake

47、 to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestat

48、ion of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of t

49、his publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn