EN 60297-3-102-2004 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 3-102 Injector extractor handle《电子设备.pdf

1、BRITISH STANDARDBS EN 60297-3-102:2004Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-102: Injector/extractor handleThe European Standard EN 60297-3-102:2004 has the status of a British StandardICS 31.240g49g50g3g38g50g51g60g44

2、g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60297-3-102:2004This British Standard was published under the authority of the Standards Policy and Strategy Committe

3、e on 30 June 2006 BSI 2006ISBN 0 580 45255 7National forewordThis British Standard is the official English language version of EN 60297-3-102:2004. It is identical with IEC 60297-3-102:2004. It supersedes BS EN 60297-4:1995 and BS EN 60297-5-101:2001 which are withdrawn.The UK participation in its p

4、reparation was entrusted to Technical Committee EPL/48/4, Mechanical structures for electronic equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement internati

5、onal or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport t

6、o include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any

7、 enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside b

8、ack cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 60297-3-102 NORME EUROPENNE EUROPISCHE NORM September 2004 CENELEC European Committee for Electrote

9、chnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No.

10、EN 60297-3-102:2004 E ICS 31.240 Supersedes EN 60297-4:1995 + A1:1999 & EN 60297-5-101:2001English version Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-102: Injector/extractor handle (IEC 60297-3-102:2004) Structures mcani

11、ques pour quipement lectronique - Dimensions des structures mcaniques de la srie de 482,6 mm (19 in) Partie 3-102: Poigne dinjecteur/dextracteur (CEI 60297-3-102:2004) Bauweisen fr elektronische Einrichtungen - Mae der 482,6-mm-(19-in-)Bauweise Teil 3-102: Ein-/Aushebegriff (IEC 60297-3-102:2004) Th

12、is European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re

13、ferences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELE

14、C member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland

15、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 48D/300/FDIS, future edition 1 of IEC 60297-3-102, prepared by SC 48D, Mechanical structures for electronic equipment

16、, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60297-3-102 on 2004-09-01. This European Standard supersedes EN 60297-4:1995 + A1:1999 and EN 60297-5-101:2001. The follow

17、ing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-09-01 Annex ZA has been ad

18、ded by CENELEC. _ Endorsement notice The text of the International Standard IEC 60297-3-102:2004 was approved by CENELEC as a European Standard without any modification. _ EN 60297-3-102:2004Page 2CONTENTSINTRODUCTION.41 Scope and object52 Normative references .53 Terms and definitions .54 Arrangeme

19、nt overview of front panel mounted injector/extractor handle Type A 65 Subrack interface dimensions for front panel mounted injector/extractor, Type A76 Plug-in unit interface dimensions for front panel mounted injector/extractor handle Type A .87 Arrangement overview of printed board mounted inject

20、or/extractor handle Type B .98 Subrack interface dimensions for printed board mounted injector/extractor handle, Type B .109 Printed board mounted injector/extractor interface dimensions handle, Type B1010 Dimensions used in the figures .11Figure 1 Relationship between the new IEC 60297-3 series and

21、 the old IEC 60297 series .4Figure 2 Arrangement overview of front panel mounted injector/extractor handle Type A .6Figure 3 Subrack interface dimensions for front panel mounted injector/extractor, Type A .7Figure 4 Plug-in unit interface dimensions for front panel mounted injector/extractor handle,

22、 Type A .8Figure 5 Arrangement overview of printed board mounted injector/extractor handle, Type B .9Figure 6 Subrack interface dimensions for printed board mounted injector /extractor handle, Type B .10Figure 7 Printed board mounted injector/extractor handle interface dimensions, Type B 10Table 1 A

23、perture dimensions of the subrack .7EN 60297-3-102:2004Page 3Annex ZA (normative) Normative references to international publications with their corresponding European publications.12INTRODUCTIONThe “Dimensions of mechanical structures of the 482,6 mm (19 in) standards are defined in IEC 60297. To th

24、e original IEC 60297-3:1988 publication was added Amendment 1:1995. The additional requirements were published in IEC 60297-4:1995 with Amendment 1:1999. The extended requirements were published in the IEC 60297-5-1XX series (2001). Responding to market requirements and for more clarity it became ne

25、cessary to merge and technically enhance these standard “parts” into 3 “new” standards for subracks and associated plug-in units. This “merged” standard series now defined as IEC 60297-3-101, IEC 60297-3-102 and IEC 60297-3-103 explains its relationship to the previous “fragmented” IEC 60297-X stand

26、ards, see Figure 1. The nomenclature of these new standards has been revised. The relationship to IEC 60297-1 (Part 1: Panels and Racks) has been maintained. The relationship to IEC 60297-2 (Part 2: Cabinets and pitches of rack structures) has been maintained. The relationship to IEC 61587-1 (Part 1

27、: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis) and IEC TS 61587-3 (Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks) has been added. IEC 60297-3-102 defines only the interface dimensions for plug-in units injector/extrac

28、tor devices which are additional to those defined in IEC 60297-3-101. Figure 1 Relationship between the new IEC 60297-3 series and the old IEC 60297 series Subracks and plug-in units IEC 60297-3-101 New “merged” standard series Subracks and associated plug-in units Subracks and plug-in units: Inject

29、or/extractor handle IEC 60297-3-102 Subracks and plug-in units: Keying and alignment pin IEC 60297-3-103 IEC 60297-3 IEC 60297-4 IEC 60297-5-102 IEC 60297-5-103 IEC 60297-5-107 Old“fragmented“ standard series Subracks and associated plug-in units IEC 60297-5-101 IEC 60297-4 IEC 60297-5-104 IEC 60297

30、-5-105 IEC 1089/04 EN 60297-3-102:2004Page 4MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT DIMENSIONS OF MECHANICAL STRUCTURESOF THE 482,6 mm (19 in) SERIES Part 3-102: Injector/extractor handle 1 Scope and object This part of IEC 60297 covers only the additional interface dimensions for injector/ex

31、tractor devices used with subracks and plug-in units according to IEC 60297-3-101. This standard may also be used in conjunction with IEC 60297-3-103. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edit

32、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60297-3-101, Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-101: Subracks and associated plug-in

33、unitsIEC 60917-1:1998, Modular order for the development of mechanical structures of electronic equipment practice. 3 Terms and definitions For the purposes of this part of IEC 60297, the terms and definitions given in IEC 60917-1 apply.EN 60297-3-102:2004Page 54 Arrangement overview of front panel

34、mounted injector/extractor handle, Type A The feature of the type A injector/extractor creates an incompatible subrack to IEC 60297-3-101 see Figure 2. Figure 2 Arrangement overview of front panel mounted injector/extractor handle, Type A Typical subrack mounting flange Printed boardInjector/extract

35、or handle mounted on front panel Typical horizontal memberTypical guide rail ConnectorIEC 1106/04 EN 60297-3-102:2004Page 65 Subrack interface dimensions for front panel mounted injector/extractor, Type A The front panel mounted injector/extractor and the receptacle on the subrack need additional in

36、terface dimensions to the subracks of IEC 60297-3-101 see Table 1 and Figure 3. Table 1 Aperture dimensions of the subrack All dimensions are in millimetres Subrack heights 3U 6U 9U Aperture H21 r 0,3 129,2 262,55 395,9 All dimensions are in millimetres NOTE Front section shown only. Rear section is

37、 of mirror image. For missing dimensions, see IEC 60297-3-101. Figure 3 Subrack interface dimensions for front panel mounted injector/extractor, Type A First pitch line n 10r0,15,08AASection A-A X2,54 0,13,5 r 0,1 5,5r0,1 8r0,1 First pitch lineDetail X Front view BBSection B-B H2183 Front/rear attac

38、hment plane Typical subrack mounting flange 5,0884 5,085,08IEC 1107/04 EN 60297-3-102:2004Page 76 Plug-in unit interface dimensions for front panel mounted injector/extractor handle, Type A The width of the injector/extractor handle can be in any horizontal pitch (! 1HP). The handle interface dimens

39、ions shall not exceed the pitch lines nor protude into the usable component area or subrack heights separation plane. See Figure 4. For dimensions in brackets, see IEC 60297-3-101. All dimensions are in millimetres NOTE For missing dimensions, see IEC 60297-3-101. Figure 4 Plug-in unit interface dim

40、ensions for front panel mounted injector/extractor handle, Type A Subrack height separation plane Usable front panel component area d 38 (d3,8) Front panel Printed board Printed board mounting area IEC 1108/04 EN 60297-3-102:2004Page 87 Arrangement overview of printed board mounted injector/extracto

41、r handle, Type B See Figure 5. Figure 5 Arrangement overview of printed board mounted injector/extractor handle, Type B Typical subrack mounting flange Printed boardInjector/extractor handle mounted on printed board Typical horizontal memberTypical guide rail ConnectorIEC 1109/04 EN 60297-3-102:2004

42、Page 98 Subrack interface dimensions for printed board mounted injector/extractor handle, Type B The width dimensions of the injector/extractor receptacles on the subrack side are only for one printed board section or for the whole subrack width. In case of full occupied subrack width, there is an i

43、ncompatibility with the dimensions of IEC 60297-3-101, concerning the heights clearance of the subrack: box type plug-in units can not be used as specified in IEC 60297-3-101. See Figure 6. All dimensions are in millimetres NOTE For missing dimensions and those in brackets, see IEC 60297-3-101. Figu

44、re 6 Subrack interface dimensions for printed board mounted injector /extractor handle, Type B 9 Printed board mounted injector/extractor interface dimensions handle, Type B See Figure 7.All dimensions are in millimetres NOTE Printed board sizes compliant to 3U subracks may be fitted with one or two

45、 handles. 6U and 9U compliant sizes shall be fitted with two handles. For missing dimensions, see IEC 60297-3-101. Figure 7 Printed board mounted injector/extractor handle interface dimensions, Type B t3,9t39,5 d 1,1ConnectorareaShaded area shall be a keep-out area for component (on both sides of th

46、e printed board) 45r 1 2,75,55t 6,9 Front view Side view 2,5r0,1 Horizontal pitch line Guide rail 10 r 0,1 4 r 0,1 5r0,1 Subrack horizontal member(H6 ) Front attachment plane IEC 1110/04 IEC 1111/04 EN 60297-3-102:2004Page 1010 Dimensions used in the figures HeightH21: Subrack aperture height requir

47、ed for the functioning of plug-in unit front panel injector/extractor devices. _EN 60297-3-102:2004Page 11Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of

48、 this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD ap

49、plies. Publication Year Title EN/HD Year IEC 60297-3-101 - 1)Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-101: Subracks and associated plug-in units EN 60297-3-101 2004 2)IEC 60917-1 1998 Modular order for the development of mechanical structures for electronic equipment practices Part 1: Generic standard EN 60917-1 1998 1)Undated reference. 2)Valid edition at date of issue. EN 602