EN 60317-67-2017 en Specifications for particular types of winding wires - Part 67 Polyvinyl acetal enamelled rectangular aluminium wire class 105.pdf

1、Specifications for particular types of winding wiresPart 67: Polyvinyl acetal enamelled rectangular aluminium wire, class105(IEC 60317-67:2017)BS EN 6031767:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60317-67

2、April 2017ICS 29.060.10English VersionSpecifications for particular types of winding wires -Part 67: Polyvinyl acetal enamelled rectangular aluminium wire,class 105(IEC 60317-67:2017)Spcifications pour types particuliers de fils de bobinage -Partie 67: Fil daluminium de section rectangulaire maillda

3、ctal de polyvinyle, classe 105(IEC 60317-67:2017)Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 67: Flachdrhte aus Aluminium,lackisoliert mit Polyvinylacetal, Klasse 105(IEC 60317-67:2017)This European Standard was approved by CENELEC on 2017-02-28. CENELEC members are bound

4、 to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-C

5、ENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cent

6、re has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

7、 Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr

8、Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 60317-67:2017 ENational forewordThis British Standard is the UK implementation of EN 60317

9、67:2017. It is identical to IEC 6031767:2017.The UK participation in its preparation was entrusted to Technical Committee L/99, Miscellaneous Standards Electrical.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to in

10、clude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90547 6ICS 29.060.10Compliance with a British Standard cannot confer immunity from legal obligations.This

11、British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6031767:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-67 April 2017 ICS 29.060.10

12、 English Version Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 (IEC 60317-67:2017) Spcifications pour types particuliers de fils de bobinage - Partie 67: Fil daluminium de section rectangulaire maill dactal de polyvin

13、yle, classe 105 (IEC 60317-67:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 67: Flachdrhte aus Aluminium, lackisoliert mit Polyvinylacetal, Klasse 105 (IEC 60317-67:2017) This European Standard was approved by CENELEC on 2017-02-28. CENELEC members are bound to comply

14、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC M

15、anagement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has

16、the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

17、ia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr

18、Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-67:2017 E BS EN 6031767:2017EN 60317-67:2017 2 European foreword The text of docum

19、ent 55/1569/CDV, future edition 1 of IEC 60317-67, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-67:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication

20、 of an identical national standard or by endorsement (dop) 2017-11-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

21、CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-67:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the followin

22、g notes have to be added for the standards indicated: IEC 60264 Series NOTE Harmonized as EN 60264 Series. IEC 60317 Series NOTE Harmonized as EN 60317 Series. IEC 60851 Series NOTE Harmonized as EN 60851 Series. BS EN 6031767:2017EN 60317-67:2017 2 European foreword The text of document 55/1569/CDV

23、 future edition 1 of IEC 60317-67, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-67:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identica

24、l national standard or by endorsement (dop) 2017-11-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or

25、CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-67:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to

26、 be added for the standards indicated: IEC 60264 Series NOTE Harmonized as EN 60264 Series. IEC 60317 Series NOTE Harmonized as EN 60317 Series. IEC 60851 Series NOTE Harmonized as EN 60851 Series. EN 60317-67:2017 3 Annex ZA (normative) Normative references to international publications with their

27、corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

28、ing any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publi

29、cation Year Title EN/HD Year IEC 60317-0-9 2015 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire EN 60317-0-9 2015 IEC 60851-4 2016 Winding wires - Test methods - Part 4: Chemical properties EN 60851-4 2016 BS EN 6031767:201

30、7This page deliberately left blank 2 IEC 60317-67:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 7 3.2.1 Methods of test 7 3.2.2 Winding wire 7 3.3 Appearan

31、ce 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 8.1 Mandrel winding test . 7 8.2 Adherence test 8 9 Heat shock 8 10 Cut-through . 8 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdown voltage 8 14 Continuity of insul

32、ation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 9 21 Loss of mass . 9 23 Pin hole test 9 30 Packaging . 9 Bibliography 10 Table 1 Mandrel winding 7 2 IEC 60317-67:20

33、17 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 7 3.2.1 Methods of test 7 3.2.2 Winding wire 7 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elon

34、gation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 8.1 Mandrel winding test . 7 8.2 Adherence test 8 9 Heat shock 8 10 Cut-through . 8 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdown voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refr

35、igerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 9 21 Loss of mass . 9 23 Pin hole test 9 30 Packaging . 9 Bibliography 10 Table 1 Mandrel winding 7 BS EN 6031767:2017IEC 60317-67:2017 IEC 2017 3 INTERNATIONAL ELECTROT

36、ECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnica

37、l committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Te

38、chnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, govern

39、mental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or

40、 agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international

41、 use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to p

42、romote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly in

43、dicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies.

44、 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property da

45、mage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this pu

46、blication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all

47、 such patent rights. International Standard IEC 60317-67 has been prepared by IEC technical committee 55: Winding wires. The text of this standard is based on the following documents: CDV Report on voting 55/1569/CDV 55/1590/RVC Full information on the voting for the approval of this International S

48、tandard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be read in conjunction with IEC 60317-0-9:2015. BS EN 6031767:2017IEC 60317-67:2017 IEC 2017 3 INTERNATIONAL

49、ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fi