EN 60317-68-2017 en Specifications for particular types of winding wires - Part 68 Polyvinyl acetal enamelled rectangular aluminium wire class 120.pdf

1、Specifications for particular types of winding wiresPart 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017)BS EN 60317-68:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60

2、317-68 April 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017) Spcifications pour types particuliers de fils de bobinage - Partie 68: Fil daluminium de section rectan

3、gulaire maill dactal de polyvinyle, classe 120 (IEC 60317-68:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 68: Flachdrhte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-68:2017) This European Standard was approved by CENELEC on 2017-02-24. CENEL

4、EC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap

5、plication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-

6、CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

7、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotec

8、hnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-68:2017 E National forewordThis British Standard is

9、the UK implementation of EN 60317-68:2017. It is identical to IEC 60317-68:2017.The UK participation in its preparation was entrusted to Technical Committee L/-/99, Miscellaneous Standards - Electrical.A list of organizations represented on this committee can be obtained on request to its secretary.

10、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90548 3ICS 29.060.10Compliance with a British Standard cannot confe

11、r immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6031768:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

12、 NORM EN 60317-68 April 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017) Spcifications pour types particuliers de fils de bobinage - Partie 68: Fil daluminium de sec

13、tion rectangulaire maill dactal de polyvinyle, classe 120 (IEC 60317-68:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 68: Flachdrhte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-68:2017) This European Standard was approved by CENELEC on 2017-0

14、2-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt

15、ained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

16、to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greec

17、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation

18、 Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-68:2017 E BS EN 6031768:2017EN 60317-68:2

19、017 2 European foreword The text of document 55/1570/CDV, future edition 1 of IEC 60317-68, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-68:2017. The following dates are fixed: latest date by which the document has to be imp

20、lemented at national level by publication of an identical national standard or by endorsement (dop) 2017-11-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-24 Attention is drawn to the possibility that some of the elements of this docum

21、ent may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-68:2017 was approved by CENELEC as a European Standard without any modification. In the officia

22、l version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 Series NOTE Harmonized as EN 60264 Series. IEC 60317 Series NOTE Harmonized as EN 60317 Series. IEC 60851 Series NOTE Harmonized as EN 60851 Series. BS EN 6031768:2017EN 60317-68:2017 2 European

23、foreword The text of document 55/1570/CDV, future edition 1 of IEC 60317-68, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-68:2017. The following dates are fixed: latest date by which the document has to be implemented at nat

24、ional level by publication of an identical national standard or by endorsement (dop) 2017-11-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-24 Attention is drawn to the possibility that some of the elements of this document may be the

25、subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-68:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for

26、Bibliography, the following notes have to be added for the standards indicated: IEC 60264 Series NOTE Harmonized as EN 60264 Series. IEC 60317 Series NOTE Harmonized as EN 60317 Series. IEC 60851 Series NOTE Harmonized as EN 60851 Series. EN 60317-68:2017 3 Annex ZA (normative) Normative references

27、to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest e

28、dition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this anne

29、x is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60317-0-9 2015 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire EN 60317-0-9 2015 IEC 60851-4 2016 Winding wires - Test methods - Part 4: Chemical pro

30、perties EN 60851-4 2016 BS EN 6031768:2017This page deliberately left blank 2 IEC 60317-68:2017 IEC 2017 CONTENTS CONTENTS 2 FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 7 3.2.1

31、 Methods of test 7 3.2.2 Winding wire 7 3.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 8.1 Mandrel winding test . 7 8.2 Adherence test 8 9 Heat shock 8 10 Cut-through . 8 11 Resistance to abrasion 8 12 Resistance to solven

32、ts . 8 13 Breakdown voltage 8 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 9 21 Loss of mass . 9 23 Pin hole test 9 30 Packaging . 9 Bibliog

33、raphy 10 Table 1 Mandrel winding 7 2 IEC 60317-68:2017 IEC 2017 CONTENTS CONTENTS 2 FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 General notes . 7 3.2.1 Methods of test 7 3.2.2 Winding wire 7 3

34、.3 Appearance 7 4 Dimensions 7 5 Electrical resistance 7 6 Elongation . 7 7 Springiness . 7 8 Flexibility and adherence . 7 8.1 Mandrel winding test . 7 8.2 Adherence test 8 9 Heat shock 8 10 Cut-through . 8 11 Resistance to abrasion 8 12 Resistance to solvents . 8 13 Breakdown voltage 8 14 Continui

35、ty of insulation 8 15 Temperature index 8 16 Resistance to refrigerants 8 17 Solderability 8 18 Heat or solvent bonding . 8 19 Dielectric dissipation factor 8 20 Resistance to transformer oil . 9 21 Loss of mass . 9 23 Pin hole test 9 30 Packaging . 9 Bibliography 10 Table 1 Mandrel winding 7 BS EN

36、6031768:2017IEC 60317-68:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organizat

37、ion for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC

38、publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

39、may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agre

40、ement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC

41、Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used

42、 or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the cor

43、responding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible fo

44、r any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees a

45、nd IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8)

46、Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent right

47、s. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-68 has been prepared by IEC technical committee 55: Winding wires. This bilingual version (2017-08) corresponds to the monolingual English version, published in 2017-01. The text of t

48、his standard is based on the following documents: CDV Report on voting 55/1570/CDV 55/1591/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon

49、. BS EN 6031768:2017IEC 60317-68:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions c