EN 60320-2-4-2006 en Appliance couplers for household and similar general purposes Part 2-4 Couplers dependent on appliance weight for engagement (Incorporates Amendment A1 2009)《家.pdf

1、BRITISH STANDARD BS EN60320-2-4:2006+A1:2009 Appliance couplers forhousehold and similargeneral purposes Part 2-4: Couplers dependent onappliance weight for engagementICS 29.120.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36

2、g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 60320-2-4:2006+A1:2009. It is identical with IEC 60320-2-4:2005,incorporating amendment 1:2009. It supersedes BS EN 60320-2-4:2006 which is withdrawn.

3、The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Techni

4、cal Committee PEL/23, Electrical accessories, to Subcommittee PEL/23/3, Connectors for portable appliances.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Use

5、rs are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60320-2-4:2006+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2006 BSI 2010Amendments/corrige

6、nda issued since publicationDate Comments 28 February 2010 Implementation of IEC amendment 1:2009 with CENELEC endorsement A1:2009ISBN 978 0 580 64898 4EUROPEAN STANDARD EN 60320-2-4:2006+A1 NORME EUROPENNE EUROPISCHE NORM December 2009 CENELEC European Committee for Electrotechnical Standardization

7、 Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60320-2-4:2006 E ICS

8、 29.20.20 English version Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for engagement (IEC 60320-2-4:2005) Connecteurs pour usages domestiques et usages gnraux analogues Partie 2-4: Connecteurs connexion par gravit (CEI 60320-2-4:2005

9、) Gertesteckvorrichtungen fr den Hausgebrauch und hnliche allgemeine Zwecke Teil 2-4: Gertesteckvorrichtungen mit vom Gertegewicht abhngiger Kupplung (IEC 60320-2-4:2005) This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal R

10、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.

11、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC me

12、mbers are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switze

13、rland and United Kingdom. 2 Foreword The text of document 23G/251/FDIS, future edition 1 of IEC 60320-2-4, prepared by SC 23G, Appliance couplers, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60320-2-4 on 2005-12-01. The follo

14、wing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-12-01 This European Stand

15、ard makes reference to International Standards. Where the International Standard referred to has been endorsed as a European Standard or a home-grown European Standard exists, this European Standard shall be applied instead. Pertinent information can be found on the CENELEC web site. This Part 2-4 i

16、s to be used in conjunction with EN 60320-1:2001, Appliance couplers for household and similar general purposes, Part 1: General requirements. The clauses of this Part 2-4 supplement or modify the corresponding clauses of EN 60320-1. Where a subclause of Part 1 is not mentioned in this Part 2-4, tha

17、t subclause of EN 60320-1 applies as far as is reasonable. Where this Part 2-4 states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. Subclauses, figures or tables which are additional to those in Part 1 are numbered starting from 101. Additiona

18、l annexes are lettered AA, BB, etc. _ Endorsement notice The text of the International Standard IEC 60320-2-4:2005 was approved by CENELEC as a European Standard without any modification. _ Foreword to amendment A1 The text of document 23G/290/CDV, future amendment 1 to IEC 60320-2-4:2005, prepared

19、by SC 23G, Appliance couplers, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60320-2-4:2006 on 2009-11-01. The following dates were fixed: latest date by which the amendment has to be implemented at national lev

20、el by publication of an identical national standard or by endorsement (dop) 2010-08-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2012-11-01 _ Endorsement notice The text of amendment 1:2009 to the International Standard IEC 60320-2-4:2005 w

21、as approved by CENELEC as an amendment to the European Standard without any modification. _ BS EN 60320-2-4:2006+A1:2009EN 60320-2-4:2006+A1:2009 (E) 3 CONTENTS 1 Scope 4 2 Normative references .4 3 Definitions5 4 General requirements.6 5 General notes on tests .6 6 Standard ratings.7 7 Classificati

22、on7 8 Marking8 9 Dimensions and compatibility .9 10 Protection against electric shock 10 11 Provision for earthing .10 12 Terminals and terminations.10 13 Construction.10 14 Moisture resistance 11 15 Insulation resistance and electric strength 12 16 Forces necessary to insert and withdraw the connec

23、tor.13 17 Operation of contacts .14 18 Resistance to heating of appliance couplers for hot conditions or very hot conditions 14 19 Breaking capacity.14 20 Normal operation15 21 Temperature rise16 22 Cords and their connection.17 23 Mechanical strength .17 24 Resistance to heat and ageing18 25 Screws

24、, current-carrying parts and connections 18 26 Creepage distances, clearances and distances through insulation 19 27 Resistance of insulating material to heat, fire and tracking 23 28 Resistance to rusting24 29 Electromagnetic compatibility (EMC) requirements24 Annex AA (normative) Proof tracking te

25、st26 Annex BB (normative) Needle flame test .27 Figure 101 Examples of clearances25 Table 101 Test voltages.13 Table 102 Rated impulse voltage .19 Table 103 Minimum clearances20 Table 104 Minimum creepage distances for basic insulation.22 BS EN 60320-2-4:2006+A1:2009Annex CC (normative) Apparatus fo

26、r the test of Subclause 14.2 .28Annex ZA (normative) Normative references to international publications withtheir corresponding European publications29 EN 60320-2-4:2006+A1:2009 (E) 4 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES Part 2-4: Couplers dependent on appliance weight for e

27、ngagement 1 Scope This clause of IEC 60320-1 is replaced as follows: This standard is applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes

28、 and intended for incorporation or integration within electric appliances or other electric equipment of multi-part construction for 50 Hz or 60 Hz supply which depend on the weight of the appliance to ensure correct engagement. NOTE 1 Appliance couplers complying with this standard are suitable for

29、 use in appliances which are used in an ambient temperature not normally exceeding 25 C but occasionally reaching 35 C. However the ambient temperature surrounding the appliance coupler may exceed these figures and is to be declared by the manufacturer. It is possible that the maximum working ambien

30、t temperature for the appliance inlet and for the connector may be different. NOTE 2 Appliance couplers dependent on appliance weight for engagement may be subject to spillage of liquid innormal use. They are classified according to whether protection against liquid spillage is provided, when instal

31、led in accordance with the manufacturers installation instructions. NOTE 3 If appliance inlets according to this standard are used with appliances or other equipment which may be subject to spillage of liquid affecting the appliance inlet when the functioning part of the appliance or equipment is se

32、ated on its power base, then protection against moisture is to be provided by the equipment. NOTE 4 References to standard sheets within IEC 60320-1 do not apply to appliance couplers dependent on appliance weight for engagement. NOTE 5 Special constructions may be required: in locations where speci

33、al conditions may prevail, for example, in ships, vehicles and the like; in hazardous locations, for example, where explosions are likely to occur. 2 Normative references This clause of IEC 60320-1 applies with the following additions: IEC 60320-1, Appliance couplers for household and similar genera

34、l purposes Part 1: GeneralrequirementsIEC 60320-2-2, Appliance couplers for household and similar general purposes Part 2-2: Interconnection couplers for household and similar equipment IEC 60320-2-3, Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a d

35、egree of protection higher than IPX0 IEC 60335-1, Household and similar electrical appliances Safety Part 1: General requirements!“IEC 60664-1, Insulation coordination for equipment within low voltage systems Part 1: Principles, requirements and tests!“!“BS EN 60320-2-4:2006+A1:2009IEC 60112, Method

36、 for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60320-2-4:2006+A1:2009 (E)IEC/TR 60083, Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC 5 IEC 61032, Protection of persons and equipment by

37、enclosures Probes for verification ISO 9772, Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame 3 Definitions This clause of IEC 60320-1 applies with the following additions: 3.101 weight-engaged coupler coupler that relies on the weig

38、ht of the functioning part of the appliance, in which it is incorporated or integrated, to ensure correct engagement NOTE The weight-engaged coupler is used in an appliance which is in two parts, for supplying the part that performs the function of the appliance (the functioning part) from the power

39、 base which is connected to the power supply. 3.102 weight-engaged connector component part of the weight-engaged coupler which carries the power connections, and engages with the corresponding appliance inlet. 3.103 weight-engaged appliance inlet component part of a weight-engaged coupler intended

40、for integration or incorporation in the functioning part of the appliance 3.104 rewirable weight-engaged connector weight-engaged connector so constructed that the supply cord can be replaced NOTE 1 The method of attachment of the supply cord, when installed in accordance with the manufacturers inst

41、allation instructions, is classified according to type X or type Y attachment requirements of the appliance standards. NOTE 2 The requirements for type X or Type Y attachment methods are given in IEC 60335-1. 3.105 type X attachment method of attachment of the supply cord such that it can easily be

42、replaced NOTE The supply cord may be specially prepared and only available from the manufacturer or its service agent. A specially prepared cord may include a part of the appliance. _ 1)A consolidated edition (1.2) exists containing IEC 60664-1:1992 and its Amendment 1 (2000) and Amendment 2 (2002).

43、 IEC 60730 (all parts), Automatic electrical controls for household and similar use IEC 61058-1, Switches for appliances Part 1: General requirements IEC 60695-11-10, Fire hazard testing, Part 11-10: Test flames, 50 W horizontal and vertical flame test methods BS EN 60320-2-4:2006+A1:2009! “!EN 6032

44、0-2-4:2006+A1:2009 (E)IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance “ 6 3.106 type Y attachment method of attachment of the supply cord such that any replacement is intended to be made by the manufacturer, it

45、s service agent or similar qualified person 3.107 type Z attachment method of attachment of the supply cord such that it cannot be replaced without breaking or destroying the appliance 4 General requirements This clause of IEC 60320-1 applies. 5 General notes on tests This clause of IEC 60320-1 appl

46、ies amended as follows: 5.2 Replacement: The specimens are tested as delivered and under normal conditions of use, in accordance with the installation instructions of the manufacturer; they are tested with a.c. at 50 Hz or 60 Hz. Non-rewirable weight-engaged connectors shall be submitted with a cord

47、 at least 1 m long. For those clauses requiring the tests to be carried out on weight-engaged connectors and weight-engaged appliance inlets installed in accordance with the manufacturers instructions, representative appliances or appliance parts shall be supplied. 5.5 Replacement: For weight-engage

48、d appliance inlets three specimens are required, to be subjected to the tests specified. For weight-engaged connectors six specimens are required: set 1 of three specimens is subjected to the tests specified, with the exception of those of Clauses 14, 15, 16, 19, 20 and 21, and of 24.2; set 2 of thr

49、ee specimens is subjected to the tests of Clauses 14, 15, 16, 19, 20, 21 and 25.101 (including the repetition of Clause 16). For weight-engaged connectors which are declared as providing protection against liquid spillage, three additional specimens are required, which are subjected to the test of 14.2. For weight-engaged connectors of elastomeric or thermoplastic material, two additional specimens are required which are subjected to the tests of 24