1、BRITISH STANDARDBS EN 60335-2-108: 2008Household and similar electrical appliances Safety Part 2-108: Particular requirements for electrolysersICS 97.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g
2、40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60335-2-108:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2008 BSI 2008ISBN 978 0 580 55454 4National forewordThis British Standard is the UK implementation of EN 6
3、0335-2-108:2008. It is identical to IEC 60335-2-108:2008.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/14, Home laundry and dishwashers.A list of organizations represented on this com
4、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued
5、 since publicationDate CommentsEUROPEAN STANDARD EN 60335-2-108 NORME EUROPENNE EUROPISCHE NORM July 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stass
6、art 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-108:2008 E ICS 13.120; 97.060 English version Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for el
7、ectrolysers (IEC 60335-2-108:2008, modified) Appareils lectrodomestiques et analogues - Scurit - Partie 2-108: Rgles particulires pour les lectrolyseurs (CEI 60335-2-108:2008, modifie) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-108: Besondere Anforderungen fr Elekt
8、rolysatoren (IEC 60335-2-108:2008, modifiziert) This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any a
9、lteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made b
10、y translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Esto
11、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 61/3413/FDIS, future edition 1 of IE
12、C 60335-2-108, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-108 on 2008-05-01 with a common modification maintaining the coherence with Clause 6 of EN 60335-1:20
13、02. The following dates are applicable: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-05-01 Th
14、is part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when suc
15、h changes become applicable will be stated in the relevant amendment of revision of Part 1. This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert it into the European Standard: Safety requirements for electrical electrolysers. When a particular subclause of Pa
16、rt 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that ar
17、e numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. subclauses, notes and annexes that are
18、additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective,
19、 the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to E
20、N 60335-1. _ BS EN 60335-2-108:2008 2 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordance with
21、the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the L
22、ow Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-108:2008 was approved by CENELEC as a European Standard with agreed common modification. _ BS EN 60335-2-108:2008 3 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Definitions 7 4 General requ
23、irement.7 5 General conditions for the tests 7 6 Classification7 7 Marking and instructions.7 8 Protection against access to live parts8 9 Starting of motor-operated appliances 8 10 Power input and current .8 11 Heating 8 12 Void8 13 Leakage current and electric strength at operating temperature8 14
24、 Transient overvoltages .8 15 Moisture resistance 8 16 Leakage current and electric strength.9 17 Overload protection of transformers and associated circuits .9 18 Endurance9 19 Abnormal operation 9 20 Stability and mechanical hazards .9 21 Mechanical strength .9 22 Construction.9 23 Internal wiring
25、.10 24 Components .10 25 Supply connection and external flexible cords 10 26 Terminals for external conductors.10 27 Provision for earthing .11 28 Screws and connections.11 29 Clearances, creepage distances and solid insulation 11 30 Resistance to heat and fire.11 31 Resistance to rusting11 32 Radia
26、tion, toxicity and similar hazards11 Bibliography15 Annex AA (normative) Ageing test for elastomeric parts.12 Annex BB (informative) Guide for additional requirements to be considered for inclusion in the end product standards for appliances that incorporate electrolysers .14 BS EN 60335-2-108:2008
27、4 Annex ZC (normative) Normative references to international publications with their corresponding European publications .16 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced pe
28、rsons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be
29、 expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected
30、to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influ
31、ence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessar
32、y to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and gen
33、eric standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, su
34、ch as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other
35、features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be subst
36、antially equivalent, may be considered to comply with the standard. For electrolysers, testing in accordance with this standard is an option and cannot be required as a precondition for testing the complete appliance, for example by reference in Clause 24 of a part 2 of IEC 60335. However, testing o
37、f the appliance should be reduced if an incorporated electrolyser including its protection system or control system, if any, complies with this standard. In particular, the construction detail inspection and testing may be done separately on the electrolysers, thereby eliminating the need for inspec
38、tion and testing when the electrolysers is applied to different appliances. BS EN 60335-2-108:2008 5 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-108: Particular requirements for electrolysers 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals
39、with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to electrolysers tested separately, under the mos
40、t severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V. NOTE 101 Examples of appliances that may contain electrolysers are dishwashers (IEC 60335-2-5); washing machines (IEC 60335-2-7); appliances producing wash water for hygiene purposes. NOTE
41、 102 This standard does not supersede the requirements of standards relevant to the particular appliance in which the electrolyser is used. However, if the electrolyser used complies with this standard, the tests for the electrolyser specified in the particular appliance standard may not need to be
42、made in the particular appliance or assembly. If the electrolyser control system is associated with the particular appliance control system, additional tests may be necessary on the final appliance. A guide for additional requirements to be considered for inclusion in the end product standards for a
43、ppliances that use electrolysers is given in Annex BB. NOTE 103 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries, additional requirements are specified by the national health
44、authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 104 This standard does not apply to appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special c
45、onditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). 2 Normative references This clause of Part 1 is applicable except as follows. Addition: IEC 60068-2-52, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium, chloride solution) IEC
46、 60079-15:2005, Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection, “n” electrical apparatus ISO 1817:2005, Rubber, vulcanized Determination of the effect of liquids BS EN 60335-2-108:2008 6 3 Definitions This clause of Part 1 is applicab
47、le except as follows. 3.1.9 Replacement: normal operation operation of the electrolyser under the following conditions: If the electrolyser is intended to be filled by the user, it is filled with the amount and type of electrolyte specified in the instructions. Water is passed through the electrolys
48、er, the temperature of the water being 15 C 501+C. 3.101 electrolyser device to produce ionized washing water 4 General requirement This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable except as follows. 5.101 Electrolysers are tested as motor-o
49、perated appliances. 6 Classification This clause of Part 1 is applicable except as follows. Modification: Electrolysers shall be of class I, class II or class III. 6.101 Electrolysers are classified as being intended for direct connection of the appliance supply cord to the electrolyser terminals, or not intended for direct connection of the appliance supply cord to the electrolyser terminals. NOTE 1 Electrolysers can, in both cases, be delivered with or without the supply co
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1