1、BSI Standards PublicationHousehold and similar electrical appliances Safety Part 2-15: Particular requirements for appliances for heating liquidsBS EN 60335-2-15:2016BS EN 60335-2-15:2016 Incorporating corrigendum March 2016BS EN 60335-2-15:2016 BRITISH STANDARDNational forewordThis British Standard
2、 is the UK implementation of EN 60335-2-15:2016. It is derived from IEC 60335-2-15:2012. It supersedes BS EN 60335-2-15:2002+A11:2012 which will be withdrawn on 12 October 2018.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each
3、common modification is indicated in the text by tags . The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/7, Safety of electrical appliances - Heated appliance group.A list of organization
4、s represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN
5、978 0 580 93404 9ICS 13.120; 97.040.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text aff
6、ected31 March 2016 CENELEC common modifications implemented in the textEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60335-2-15 January 2016 ICS 13.120; 97.040.50 Supersedes EN 60335-2-15:2002 English Version Household and similar electrical appliances - Safety - Part 2-15: Particular require
7、ments for appliances for heating liquids (IEC 60335-2-15:2012 , modified) Appareils lectrodomestiques et analogues - Scurit - Partie 2-15: Exigences particulires pour les appareils de chauffage des liquides (IEC 60335-2-15:2012 , modifie) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche
8、 Zwecke - Teil 2-15: Besondere Anforderungen fr Gerte zur Flssigkeitserhitzung (IEC 60335-2-15:2012 , modifiziert) This European Standard was approved by CENELEC on 2015-10-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi
9、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three offici
10、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechni
11、cal committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Sl
12、ovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016
13、CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60335-2-15:2016 E BS EN 60335-2-15:2016EN 60335-2-15:2016 (E) 2 European foreword This document (EN 60335-2-15:2016) consists of the text of IEC 60335-2-15:2012 prepared by IEC/TC 61 “
14、Safety of household and similar electrical appliances“, together with the common modifications prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an
15、 identical national standard or by endorsement (dop) 2016-10-12 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-10-12 This document supersedes EN 60335-2-15:2002. This Part 2-15 is to be used in conjunction with EN 60335-1:2012 and its amend
16、ments. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60335-2-15:2012 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible
17、 for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60335-2-15:2012 was approved
18、by CENELEC as a European Standard with agreed common modifications. BS EN 60335-2-15:2016 2 BS EN 60335-2-15:2016EN 60335-2-15:2016 (E)EN 60335-2-15:2016 (E) 2 European foreword This document (EN 60335-2-15:2016) consists of the text of IEC 60335-2-15:2012 prepared by IEC/TC 61 “Safety of household
19、and similar electrical appliances“, together with the common modifications prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national
20、standard or by endorsement (dop) 2016-10-12 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-10-12 This document supersedes EN 60335-2-15:2002. This Part 2-15 is to be used in conjunction with EN 60335-1:2012 and its amendments. Clauses, subc
21、lauses, notes, tables, figures and annexes which are additional to those in IEC 60335-2-15:2012 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any
22、 or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60335-2-15:2012 was approved by CENELEC as a Euro
23、pean Standard with agreed common modifications. BS EN 60335-2-15:2016BS EN 60335-2-15:201660035-2-15 IEC:2012 3 CONTENTSFOREWORD 4INTRODUCTION 71 Scope 82 Normative references 103 Terms and definitions 104 General requirement 115 General conditions for the tests 116 Classification 137 Marking and in
24、structions 138 Protection against access to live parts 169 Starting of motor-operated appliances 1610 Power input and current 1611 Heating 1612 Void2013 Leakage current and electric strength at operating temperature 2014 Transient overvoltages2015 Moisture resistance 2016 Leakage current and electri
25、c strength 2217 Overload protection of transformers and associated circuits 2218 Endurance 2219 Abnormal operation 2220 Stability and mechanical hazards 2521 Mechanical strength 2522 Construction 2623 Internal wiring 2924 Components 3025 Supply connection and external flexible cords 3026 Terminals f
26、or external conductors 3127 Provision for earthing3128 Screws and connections 3129 Clearances, creepage distances and solid insulation 3130 Resistance to heat and fire 3231 Resistance to rusting 3232 Radiation, toxicity and similar hazards 32Annexes 33Annex C (normative) Ageing test on motors 33Bibl
27、iography 34Figure Z101 Probe for measuring flat surface temperatures 17Figure 101 Schematic representation of the 30 ml spillage test 32Table Z101 Maximum temperature rises of external enclosures under normal operating conditions 1960335-2-15 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HO
28、USEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-15: Particular requirements for appliances for heating liquids FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Com
29、mittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Avai
30、lable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental or
31、ganizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technica
32、l matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC N
33、ational Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformit
34、y, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC
35、itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure th
36、at they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any na
37、ture whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1