EN 60335-2-24-2010 en Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances ice-cream appliances and ice makers《家用和类.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances SafetyPart 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makersBS EN 60335-2-24:2010Incorpo

2、rating corrigendum November 2010National forewordThis British Standard is the UK implementation of EN 60335-2-24:2010. It isidentical to IEC 60335-2-24:2010. It supersedes BS EN 60335-2-24:2003+A2:2007 which will be withdrawn on 1 March 2015.The UK participation in its preparation was entrusted by T

3、echnical CommitteeCPL/61, Safety of household and similar electrical appliances, toSubcommittee CPL/61/3, Refrigerators and food freezers.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary pr

4、ovisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 73179 2ICS 97.040.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee o

5、n 31 July 2010.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60335-2-24:2010December 2010 Correction to supersession details in national forewordEUROPEAN STANDARD EN 60335-2-24 NORME EUROPENNE EUROPISCHE NORM April 2010 CENELEC European Committee for Electrote

6、chnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN

7、 60335-2-24:2010 E ICS 97.040.30 Supersedes EN 60335-2-24:2003 + A1:2005 + A2:2007 + A11:2004 + A12:2009English version Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers (IEC 60335-2-24:2010) Ap

8、pareils lectrodomestiques et analogues - Scurit - Partie 2-24: Rgles particulires pour les appareils de rfrigration, les sorbetires et les fabriques de glace (CEI 60335-2-24:2010) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-24: Besondere Anforderungen fr Khl-/Gefrie

9、rgerte und Speiseeis- und Eisbereiter (IEC 60335-2-24:2010) This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w

10、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lan

11、guage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Re

12、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 61C/459/FDIS, f

13、uture edition 7 of IEC 60335-2-24, prepared by SC 61C, Household appliances for refrigeration, of IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-24 on 2010-03-01. This European Standard supers

14、edes EN 60335-2-24:2003 + A1:2005 + A2:2007 + A11:2004 + A12:2009. The principal changes in this edition as compared with EN 60335-2-24:2003 are as follows (minor changes are not listed): aligns the text with EN 60335-1, and its Amendments 1, 2, 11, 12 and 13; clarifies the term “household and simil

15、ar use” (1, 7.12); updates marking requirements for supply terminals of battery operated appliances (7.6, 7.101); introduces requirements for appliances using transcritical refrigerant systems (3.112, 3.113, 3.114, 3.115, 3.116, 7.1, 7.6, 7.12.1, 22.103, 24.1.4, 24.102); introduces an enhanced flexi

16、ng test (23.3); introduces requirements for accessible glass panels (22.116); clarifies tests for appliances using flammable refrigerants (22.107, Annex DD). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall no

17、t be held responsible for identifying any or all such patent rights. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-12-01 - date on which national standards conflictin

18、g with the EN have to be withdrawn (dow) 2015-03-01 This Part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 hav

19、e also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Household and similar electri

20、cal appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“

21、or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are nu

22、mbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. BS EN 60335-2-24:2010EN 60335-2-24:2010 (E) 2 NOTE 2 The following

23、 print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national condi

24、tions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this document, p is used in the margin to indicate instructions for pre

25、paring the printed version. _ BS EN 60335-2-24:2010EN 60335-2-24:2010 (E) 3 Introduction p Add: An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving

26、 parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard to

27、gether with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-24:2010 was approved by CENELEC as a European Standard without any modification. _ Bibliography p Add the following notes to the standards mentioned: IEC 60079 s

28、eries NOTE Harmonized in EN 60079 series (partially modified). IEC 60335-2-75 NOTE Harmonized as EN 60335-2-75. IEC 60335-2-89 NOTE Harmonized as EN 60335-2-89. ISO 13732-1 NOTE Harmonized as EN ISO 13732-1. _ BS EN 60335-2-24:2010EN 60335-2-24:2010 (E) 4 p Add: Annex ZC (normative) Normative refere

29、nces to international publications with their corresponding European publications Publication Year Title EN/HD Year IEC 60068-2-11 - Environmental testing - Part 2: Tests - Test Ka: Salt mist EN 60068-2-11 - IEC 60079-4A1)- Electrical apparatus for explosive gas atmospheres Part 4: Method of test fo

30、r ignition temperature - First supplement to IEC 60079-4:1966 - - IEC 60079-15 2005 Electrical apparatus for explosive gas atmospheres - Part 15: Construction, test and marking of type of protection “n“ electrical apparatus EN 60079-15 2005 IEC/TR 60079-20 - Electrical apparatus for explosive gas at

31、mospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus - - IEC 60335-2-5 (mod) 2002 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers EN 60335-2-5 + A11 2003 2009 IEC 60335-2-34 + A1 + A2 2002 2004

32、 2008 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors EN 60335-2-34 + A1 + A2 + A11 2002 2005 2009 2004 ISO 209 - Aluminium and aluminium alloys - Chemical composition - - ISO 817 - Organic refrigerants - Number designation - - ISO 4126

33、-2 2003 Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices - - ISO 5149 1993 Mechanical refrigerating systems used for cooling and heating - Safety requirements - - _ 1) IEC 60079-4A is superseded by IEC 60079-20-1:2010. BS EN 60335-2-24:2010EN 60335-2-24

34、:2010 (E) 5 CONTENTS INTRODUCTION.8 1 Scope.9 2 Normative references .10 3 Definitions 11 4 General requirement.13 5 General conditions for the tests 13 6 Classification15 7 Marking and instructions.15 8 Protection against access to live parts19 9 Starting of motor-operated appliances 19 10 Power in

35、put and current .19 11 Heating 20 12 Void23 13 Leakage current and electric strength at operating temperature23 14 Transient overvoltages .24 15 Moisture resistance 24 16 Leakage current and electric strength.25 17 Overload protection of transformers and associated circuits .26 18 Endurance26 19 Abn

36、ormal operation 26 20 Stability and mechanical hazards .28 21 Mechanical strength .30 22 Construction.31 23 Internal wiring.40 24 Components .41 25 Supply connection and external flexible cords 42 26 Terminals for external conductors.43 27 Provision for earthing .43 28 Screws and connections.44 29 C

37、learances, creepage distances and solid insulation 44 30 Resistance to heat and fire.44 31 Resistance to rusting45 32 Radiation, toxicity and similar hazards45 Annexes .48 Annex C (normative) Ageing test on motors .48 Annex D (normative) Thermal motor protectors48 Annex P (informative) Guidance for

38、the application of this standard to appliances used in warm damp equable climates48 Annex AA (normative) Locked-rotor test of fan motors .49 Annex BB (informative) Method for accumulation of frost .51 Annex CC (normative) Non-sparking “n” electrical apparatus .54 BS EN 60335-2-24:2010EN 60335-2-24:2

39、010 (E) 6 Annex DD (informative) Sound manufacturing practice for compression-type appliances which use flammable refrigerant56 Bibliography57 Figure 101 Apparatus for spillage test46 Figure 102 Detail of scratching tool tip.47 Figure AA.1 Supply circuit for locked-rotor test of a single-phase fan m

40、otor .50 Figure BB.1 Diagram of apparatus for water evaporation for accumulation of frost.52 Figure BB.2 Apparatus for water evaporation and for accumulation of frost53 Table 101 Maximum temperatures for motor-compressors .22 Table 102 Refrigerant flammability parameters 38 BS EN 60335-2-24:2010EN 6

41、0335-2-24:2010 (E) 7 INTRODUCTION It has been assumed in the drafting of this international standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as

42、 electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the s

43、afe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this

44、 standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additio

45、nal requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requiremen

46、ts. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when d

47、eveloping the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An app

48、liance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials

49、 or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-24:2010EN 60335-2-24:2010 (E) 8 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-24: Particular requirements for refrigerating appliances, ice-cream a