1、BRITISH STANDARD BS EN 60335-2-44:2002+A2:2012Household and similar electrical appliances Safety Part 2-44: Particular requirements for ironersICS 97.060nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnull n
2、ullnull nullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnullnullNational forewordThis British Standard is the UK implementation of EN 60335-2-44:2002+A2:2012. It is identical to IEC 60335-2-44:2002, incorporating amendments 1:2008 and 2:2011. It supersedes BS E
3、N 60335-2-44:2002+A1:2008, which will be withdrawn on 4 October 2014.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated
4、by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/7, Safety of electric appliances - Heated appliance group.A list of organizations represented on this subcommittee can be obtained
5、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60335-2-44:2002+A2:2012This British Standard w
6、aspublished under the authorityof the Standards Policy andStrategy Committeeon 14 January 2003 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 30 November 2008 Implementation of IEC amendment 1:2008 with CENE
7、LEC endorsement A1:200830 April 2012 Implementation of IEC amendment 2:2011 with CENELEC endorsement A2:2012ISBN 978 0 580 73828 9EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMCENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Ko
8、mitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60335-2-44:2002 EICS 97.060 Supersedes EN 60335-2-44:2002+A1:2008English versionHouse
9、hold and similar electrical appliances -SafetyPart 2-44: Particular requirements for ironers(IEC 60335-2-44:2002)Appareils lectrodomestiques etanalogues - ScuritPartie 2-44: Rgles particulirespour les machines repasser(CEI 60335-2-44:2002)Sicherheit elektrischer Gerte fr denHausgebrauch und hnliche
10、ZweckeTeil 2-44: Besondere Anforderungenfr Bgelmaschinen und Bgelpressen(IEC 60335-2-44:2002)This European Standard was approved by CENELEC on 2002-11-01. CENELEC members arebound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the s
11、tatus of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German).
12、Aversion in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,De
13、nmark, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.EN 60335-2-44:2002+A2March 2012ForewordThe text of document 61/2167/FDIS, future third edition ofIEC 60335-2-44, prepared
14、 by the IEC TechnicalCommittee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 60335-2-44 on 2002-11-01.This European Standard replaces EN 60335-2-44:1997.The following dates are applicable:-latest date by which the EN has to be implementedat national level by pub
15、lication of an identicalnational standard or by endorsement (dop) 2003-08-01-date on which national standardsconflicting with the EN have to be withdrawn(dow)2005-11-01This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requir
16、ements. It was established on the basis of the 2002 edition of that standard.Amendments and revisions of Part1 have also to be taken into account and the dates when suchchanges become applicable will be stated in the relevant amendment or revision of Part 1.This part 2 supplements or modifies the co
17、rresponding clauses of EN 60335-1, so as to convert it into theEuropean Standard: Safety requirements for electric ironers.When a particular subclause of Part1 isnot mentioned in this part 2, that subclause applies as far as isreasonable. When this standard states “addition“, “modification“ or “repl
18、acement“, the relevant text ofPart 1 is to be adapted accordingly.NOTE 1 The following numbering system is used:-subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;-unlessnotes are in a new subclause or involve notes in Part 1, they are numbered star
19、ting from 101, including those in areplaced clause or subclause;-additional annexes are lettered AA, BB, etc.;- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.NOTE 2 The following print types are used:- requirements: in roman type;- test
20、 specifications: in italic type ;-notes: in small roman type.Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated nounare also in bold.There are no special national conditions causing a deviation from this European Standard, oth
21、er thanthose listed in Annex ZA to EN 60335-1.There are no national deviations from this European Standard, other than those listed in Annex ZB toEN 60335-1._BS EN 60335-2-44:2002+A2:2012 EN 60335-2-44:2002+A2:2012 (E)Page 2Foreword to amendment A1The text of document 61/3545/FDIS, future amendment
22、1 to IEC 60335-2-44:2002, prepared byIEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-44:2002 on 2008-05-01.The following dates are applicable:-latestdate by whi
23、ch the amendment has to beimplemented at national level bypublication ofan identical national standard or by endorsement (dop) 2009-02-01-date on which national standards conflicting with the amendment have to be withdrawn(dow) 2013-05-01This amendment supplements or modifies the corresponding claus
24、es of EN 60335-2-44:2002.There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _Endorsement noticeThe text of amendment 1:2008 to the International Standard IEC 60335-2-44:2002 was approved byCENELEC as an amendment to
25、 the European Standard without any modification. IntroductionAn investigation by CENELEC TC 61 has shown that all risks from products within the scope of thisstandard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanicalmoving parts, a risk assessment in accordanc
26、e with the Machinery Directive, 98/37/EC, has shown thatthe risks are mainly of electrical origin and consequently this directive is not applicable. However,therelevant essential safety requirements of the Machinery Directive are covered by this standard togetherwith the principal objectives of the
27、Low Voltage Directive._Endorsement noticeThe text of the International Standard IEC 60335-2-44:2002 was approved by CENELEC as a EuropeanStandard without any modification._In the Bibliography, add the following note to the standard mentioned:ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not mo
28、dified)._BS EN 60335-2-44:2002+A2:2012 EN 60335-2-44:2002+A2:2012 (E)Page 3Foreword to amendment A2The text of document 61/4098/CDV, future edition 3 of IEC 60335-2-44:2002/A2, prepared by IEC/TC 61 “Safety of household and similar electrical appliances“ was submitted to the IEC-CENELEC parallel vot
29、e and approved by CENELEC as EN 60335-2-44:2002/A2:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-09-02 latest date by which the national standards conflictin
30、g with the document have to be withdrawn (dow) 2014-10-04 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text
31、of the International Standard IEC 60335-2-44:2002/A2:2011 was approved by CENELEC as a European Standard without any modification. BS EN 60335-2-44:2002+A2:2012 EN 60335-2-44:2002+A2:2012 (E)Page 4CONTENTSINTRODUCTION.61Scope.72Normative references .73Definitions 84General requirement.95General cond
32、itions forthe tests96Classification97Marking and instructions.98Protection againstaccess to live parts99Starting of motor-op e rated appliances910 Power input and current 911 Heating.912 Void .1013 Leakage current and electric strength at operating temperature1014 Transient overvoltages .1015 Moistu
33、re resistance1016 Leakage current and electric strength.1017 Overload protection of transformers andassociated circuits.1 118 Endurance1 119 Abnormal operation 1 120 Stabilityand mechanical hazards1 121 Mechanicalstrength.1 222 Construction.1 223 Internal wiring.124 Components.125 Supply connection
34、and external flexible cords126 Terminals for external conductors.127 Provision for earthing.128 Screws and connections.129 Clearances, creepage distancesand solidinsulation130 Resistanceto heat and fire.131 Resistance to rusting132 Radiation, toxicity and similar hazards1Annexes.1Bibliography1Figure
35、 101 Dimensions of the feed opening ofmangles .1BS EN 60335-2-44:2002+A2:2012 EN 60335-2-44:2002+A2:2012 (E)Page 55555555555776INTRODUCTION It has been assumed in thedrafting of this International Standard that the execution ofitsprovisions is entrusted to appropriately qualified and experienced per
36、sons.This standardrecognizesthe internationally accepted levelof protection against hazardssuchas electrical, mechanical, thermal,fire and radiation of appliances when operated as in normal use taking intoaccount the manufacturers instructions. It also coversabnormalsituations thatcan be expectedinp
37、ractice and takes into account the way in whichelectromagnetic phenomena can affect the safe operation of appliances.This standard takes into accountthe requirements of IEC 60364 as far as possible sothatthere is compatibilitywith the wiring ruleswhen the appliance is connected to the supply mains.
38、However, national wiring rules may differ.If an appliance within the scope of this standard also incorporates functions that are coveredfar as is reasonable. If applicable, the influence of one function on the other is taken into account.An appliance that complieswith the text of this standard will
39、not necessarily be considered to comply with the safetyprinciples of the standard if, when examined and tested,itis found tohave other features that impair the level of safetycovered bythese requirements.An appliance employing materials or having forms of construction differing from those detailedin
40、 the requirements of this standard may be examined and testedaccordingto theintentofthe requirements and, if foundtobe substantially equivalent, may be considered to complywith the standard. in Part1, Part 1 applies. NOTE 1 not necessary to specify particular requirements for the appliance in questi
41、on over and above the generalrequirements.This standard isa product family standard dealingwith the safety of appliancesand takesprecedence over horizontal andgeneric standards covering the same subject.NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been
42、 taken intoconsideration when developing the general and particular requirements for the IEC 60335 series of standards. Forexample, in the case of temperature requirements for surfaces on many appliances, generic standards, such asby another Part 2 of IEC 60335, the relevant Part 2 is applied to eac
43、h function separately, asWhen aPart 2 standard does notincludeadditional requirements to coverhazards dealt withThis means that the technical committees responsible for the Part 2 standards have determined that it isISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 orPart 2 stan
44、dards.BS EN 60335-2-44:2002+A2:2012 EN 60335-2-44:2002+A2:2012 (E)Page 6 6 HOUSEHOLDAND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-44: Particular requirements for ironers1 ScopeThis clause of Part 1 is replaced by the following.This International Standard deal s with the safety of electr ic ironers
45、 for household and similarpurposes, their rated voltage being not more than 250 V forsingle-phase appliances and480 V forother appliances.Appliances not intended fornormalhousehold use but which nevertheless may be a source ofdanger to the public, such as appliancesintended to be used by laymen insh
46、ops, in lightindustry and on farms, are within the scope ofthis standard.NOTE 101 Examples of appliances within the scope of this standard are ironing presses for one-person operation; mangles; rotary ironers for one-person operation; trouser presses .As far as ispracticable, thisstandard deals wi t
47、h the commonhazards presented byappliances that are encountered by all persons in and around the home. However,in general,it does not take into accountNOTE 102 Attention is drawn to the fact thatfor appliances intended to be used in vehicles oron board ships oraircraft, additional requirements may b
48、enecessary;in many countries additional requirements are specified by the national health authorities, the nationalauthorities responsible for the protection of labour and similar authorities.NOTE 103 This standard does not apply to rotary ironers for operation by more than one person. The roller le
49、ngth of such appliances normally exceeds1,6 m in length;appliances intended exclusively for industrial purposes;appliances intended to be used in locations where special conditions prevail, such as the presence of acorrosive or explosive atmosphere (dust, vapouror gas);electric irons (IEC 60335-2-3)2 Normative referencesThis clauseof Part 1 is applicable.persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them fr
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1