EN 60335-2-53-2011 en Household and similar electrical appliances - Safety - Part 2-53 Particular requirements for sauna heating appliances and infrared cabins《家用和类似用途电器 安全性 第2-53部.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 60335-2-53:2011Household and similarelectrical appliances Safety Part 2-53: Particular requirements for saunaheating appliances and infrared cabinsBS EN 60335-2-53:2011 BRI

2、TISH STANDARDNational forewordThis British Standard is the UK implementation of EN60335-2-53:2011. It is identical to IEC 60335-2-53:2011. It supersedes BS EN 60335-2-53:2003, which will be withdrawn on 25 May 2014.The UK participation in its preparation was entrusted to TechnicalCommittee CPL/61/7,

3、 Safety of electrical appliances - Heated appliance group.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The Bri

4、tish Standards Institution 2012ISBN 978 0 580 69711 1ICS 97.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicati

5、onDate Text affectedBS EN 60335-2-53:2011EUROPEAN STANDARD EN 60335-2-53 NORME EUROPENNE EUROPISCHE NORM December 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: A

6、venue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-53:2011 E ICS 97.100.10 Supersedes EN 60335-2-53:2003 + A1:2007English version Household and similar electrical appliances - Safety -

7、Part 2-53: Particular requirements for sauna heating appliances and infrared cabins (IEC 60335-2-53:2011) Appareils lectrodomestiques et analogues - Scurit - Partie 2-53: Rgles particulires pour les appareils de chauffage de saunas et les cabines infrarouges (CEI 60335-2-53:2011) Sicherheit elektris

8、cher Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-53: Besondere Anforderungen fr Saunaheizgerte und Infrarot-Kabinen (IEC 60335-2-53:2011) This European Standard was approved by CENELEC on 2011-05-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipul

9、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europea

10、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC membe

11、rs are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia

12、, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60335-2-53:2011EN 60335-2-53:2011 - 2 - Foreword The text of document 61/4135/FDIS, future edition 4 of IEC 60335-2-53, prepared by IEC/TC 61 “Safety of household and similar electrical appliances“ was submitted to the IEC-CENELEC

13、parallel vote and approved by CENELEC as EN 60335-2-53:2011. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-06-16 - date on which national standards conflicting with t

14、he EN have to be withdrawn (dow) 2014-05-25 This European Standard supersedes EN 60335-2-53:2003 + A1:2007. The principal changes in EN 60335-2-53:2011 as compared with EN 60335-2-53:2003 are as follows (minor changes are not listed): the scope is changed to cover infrared cabins; additional require

15、ments for recessed sauna heaters are added; requirements of electronic interlocks are added (22.108). This Part 2 has to be used in conjunction with EN 60335-1:2012, Household and similar electrical appliances Safety Part 1: General requirements. NOTE 1 When “Part 1” is mentioned in this standard, i

16、t refers to EN 60335-1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric sauna heating appliances and infrared cabins. When a particular subclause of Part 1 is not mentioned in this Part 2, t

17、hat subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additi

18、onal to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standar

19、d are prefixed with the letter Z. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun

20、 are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this document, p

21、is used in the margin to indicate instructions for preparing the printed version. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. BS EN 6

22、0335-2-53:2011- 3 - EN 60335-2-53:2011 Introduction p Add: An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordan

23、ce with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives

24、of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-53:2011 was approved by CENELEC as a European Standard without any modification. _ Bibliography p Add the following notes to the standards mentioned: IEC 60335-2-30 NOTE Harmonized as EN 60335-2-30.

25、 IEC 60335-2-88 NOTE Harmonized as EN 60335-2-88. IEC 60335-2-98 NOTE Harmonized as EN 60335-2-98. _ BS EN 60335-2-53:2011EN 60335-2-53:2011 - 4 - p Add: Annex ZC (normative) Normative references to international publications with their corresponding European publications Addition: Publication Year

26、Title EN/HD Year ISO 3864-1 - Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings - - 2 60335-2-53 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 7 1 Scope . 8 2 Normative references . 9 3 Terms and definitions . 9 4 General requirement

27、 . 10 5 General conditions for the tests 10 6 Classification 10 7 Marking and instructions . 11 8 Protection against access to live parts 14 9 Starting of motor-operated appliances 14 10 Power input and current . 14 11 Heating 14 12 Void 15 13 Leakage current and electric strength at operating tempe

28、rature 15 14 Transient overvoltages . 15 15 Moisture resistance 15 16 Leakage current and electric strength . 15 17 Overload protection of transformers and associated circuits . 15 18 Endurance 15 19 Abnormal operation 16 20 Stability and mechanical hazards . 18 21 Mechanical strength . 18 22 Constr

29、uction . 19 23 Internal wiring . 21 24 Components . 22 25 Supply connection and external flexible cords 22 26 Terminals for external conductors . 22 27 Provision for earthing . 22 28 Screws and connections . 22 29 Clearances, creepage distances and solid insulation 23 30 Resistance to heat and fire

30、. 23 31 Resistance to rusting 23 32 Radiation, toxicity and similar hazards 23 Annexes . 25 Annex R (normative) Software evaluation 25 Annex AA (normative) Sauna room for testing sauna heating appliances . 26 Annex BB (normative) Estimation of the infrared radiation . 28 Bibliography 30 Figure 101 T

31、emperature/relative humidity characteristic during normal operation . 24 Figure 102 Temperature/relative humidity characteristic during abnormal operation . 24 60335-2-53 IEC:2011 3 Figure AA.1 Sauna room 27 Table 101 Volume of sauna room . 16 4 60335-2-53 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COM

32、MISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-53: Particular requirements for sauna heating appliances and infrared cabins FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical co

33、mmittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techni

34、cal Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, government

35、al and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agr

36、eements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use

37、 and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promo

38、te international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indica

39、ted in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6)

40、All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage

41、 or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this public

42、ation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all suc

43、h patent rights. International Standard IEC 60335-2-53 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This fourth edition cancels and replaces the third edition published in 2002 and its Amendment 1 (2007). It constitutes a technical revision.

44、 The principal changes in this edition as compared with the third edition of IEC 60335-2-53 are as follows (minor changes are not listed): the scope is changed to cover infrared cabins; additional requirements for recessed sauna heaters are added; requirements of electronic interlocks are added (22.

45、108). 60335-2-53 IEC:2011 5 The text of this standard is based on the following documents: FDIS Report on voting 61/4135/FDIS 61/4157/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been draf

46、ted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IE

47、C 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for electric sauna heating appliances and infrared cabins. When a particular subclause of Part 1 is not mentioned in this part 2, that

48、 subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additiona

49、l to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adj