EN 60335-2-62-2008 en Household and similar electrical appliances C Safety Part 2-62 Particular requirements for commercial electric rinsing sinks (Incorporating Corrigendum August.pdf

1、BRITISH STANDARD BS EN 60335-2-62: 2003+A1:2008 Incorporating corrigendum August 2007 Household and similar electrical appliances Safety Part 2-62: Particular requirements for commercial electric rinsing sinks ICS 97.040.10 BS EN 60335-2-62:2003+A1:2008 This British Standard was published under the

2、authority of the Standards Policy and Strategy Committee on 16 June 2003 BSI 2008 ISBN 978 0 580 63592 2 National foreword This British Standard is the UK implementation of EN 60335-2-62:2003+A1:2008, incorporating corrigendum August 2007. It is identical with IEC 60335-2-62:2002, incorporating amen

3、dment 1:2008. It supersedes BS EN 60335-2-62:2003 which will be withdrawn on 1 March 2011. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC ame

4、ndment 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/5, Commercial catering equipment. A list of organizations represented on this subcommittee can be obtained o

5、n request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Amd

6、. No. Date Comments 17470 Corrigendum No. 1 30 November 2007 Implementation of CENELEC corrigendum August 2007. Last paragraph of EN foreword replaced. Addition to Annex ZB deleted 30 September 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008EUROPEAN STANDARD EN 60335-2-6

7、2:2003+A1 NORME EUROPENNE EUROPISCHE NORM April 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights o

8、f exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-62:2003 E ICS 97.040.10 Supersedes EN 60335-2-62:1997 + A1:1999 + A2:2000English version Household and similar electrical appliances Safety Part 2-62: Particular requirements for commercial electr

9、ic rinsing sinks (IEC 60335-2-62:2002) Appareils lectrodomestiques et analogues Scurit Partie 2-62: Rgles particulires pour les plonges lectriques usage collectif (CEI 60335-2-62:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-62: Besondere Anforderungen fr elektris

10、che Splbecken fr den gewerblichen Gebrauch (IEC 60335-2-62:2002) This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

11、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any othe

12、r language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland,

13、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. IncorporatingcorrigendumAugust2007Foreword The text of document 61E/407/FDIS, future third edition of IEC 60335-2-62, prepared by SC 6

14、1E of the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-62 on 2003-02-01. This European Standard replaces EN 60335-2-62:1997. The following dates are applicable: - latest date by which the EN has to be implemented at national lev

15、el by publication of an identical national standard or by endorsement (dop) 2003-11-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-02-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1

16、: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplement

17、s or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for commercial electric rinsing sinks. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard

18、states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause o

19、r involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following pri

20、nt types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national con

21、ditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. _ Page2 TherearenonationaldeviationsfromthisEuropeanStandard,otherthanthoselistedinAnnexZBto EN603351. BS EN 60335-2-62:2003+A1:2008Introduction An investigation by CENELEC TC 61 has shown tha

22、t all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and con

23、sequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-62:2002

24、 was approved by CENELEC as a European Standard without any modification. _ p Add: ABZ xenn (ifnroitamv)e A-vedisnoita :noitiddA sualCe veDiitaon 51.7 uAstria (Ekeltrsocztuhvrero- 5991 gnund GBrN .lB)51.7 ,5991/607 . fI m ehtrakfo gni fixcnailppa dese si siv tonifa elbret cnailppa ehtsah e sni neebt

25、,della eht retnavel fniormnoita ssla llaho cni eblni dedu sni ehttructsnoi w lebal lanoitidda na no dnahcih cf eb naixraen de cnailppa ehtfa eret snit.noitalla _ Page3 The text of document 61E/599/FDIS, future amendment 1 to IEC 60335-2-62:2002, prepared by SC 61E, Safety of electrical commercial ca

26、tering equipment, of IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-62:2003 on 2008-03-01. The following dates are applicable: - latest date by which the amend

27、ment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-12-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2011-03-01 This amendment supplements or modifies the corresponding clauses of

28、 EN 60335-2-62:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the International Standard IEC 60335-2-62:2002 was approved by CENELEC as an amendment to

29、the European Standard without any modification. _ BS EN 60335-2-62:2003+A1:2008 Foreword to amendment A1 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references.6 3 Definitions6 4 General requirement.7 5 General conditions for the tests 7 6 Classification8 7 Marking and instructions.8 8 Protection

30、against access to live parts9 9 Starting of motor-operated appliances 9 10 Power input and current .10 11 Heating10 12 Void .10 13 Leakage current and electric strength at operating temperature10 14 Transient overvoltages .11 15 Moisture resistance11 16 Leakage current and electric strength.12 17 Ov

31、erload protection of transformers and associated circuits .12 18 Endurance12 19 Abnormal operation13 20 Stability and mechanical hazards .13 21 Mechanical strength .13 22 Construction.13 23 Internal wiring.14 24 Components.15 25 Supply connection and external flexible cords 15 26 Terminals for exter

32、nal conductors.15 27 Provision for earthing .15 28 Screws and connections.16 29 Clearances, creepage distances and solid insulation16 30 Resistance to heat and fire.16 31 Resistance to rusting16 32 Radiation, toxicity and similar hazards16 Annexes .18 Bibliography18 Figure 101 Splash apparatus .17 P

33、age4 AnnexN(normative)Prooftrackingtest 18 BS EN 60335-2-62:2003+A1:2008INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard takes into account the requireme

34、nts of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of

35、 IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety pri

36、nciples of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined

37、and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. Page5 This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiat

38、ion of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. When a part 2 standa

39、rd does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and a

40、bove the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been take

41、n into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1

42、or part 2 standards. BS EN 60335-2-62:2003+A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-62: Particular requirements for commercial electric rinsing sinks 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrically

43、 operated commercial rinsing sinks not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. NOTE 101 These appliances are used for example in restaurants, canteens, hospitals and

44、 commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. NOTE 102 Attention

45、 is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; for appliances intended to be used in tropical countries, special requirements may be necessary; in many countries additional requirements are specified

46、by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 103 This standard does not apply to appliances designed primarily for sterilizing to clinical standards; dishwashers (IEC 335-2-5

47、8); appliances designed exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). 2 Normative references This clause of Part 1 is applicable. 3 Definitions This

48、 clause of Part 1 is applicable except as follows. 3.1.4 Addition: NOTE 101 The rated power input is the sum of the power inputs of all the individual elements in the appliance that can be on at one time; where there are several such combinations possible, that giving the highest power input is used

49、 in determining the rated power input. Page6 BS EN 60335-2-62:2003+A1:20083.1.9 Replacement: normal operation operation of the appliance under the following conditions Appliances are operated in accordance with the instructions for use, with all the controls intended to be operated by the user adjusted to their maximum setting. Lids a