EN 60335-2-75-2004 en Household and similar electrical appliances C Safety Part 2-75 Particular requirements for commercial dispensing appliances and vending machines (Incorporates.pdf

1、BRITISH STANDARD BS EN60335-2-75:2004Incorporatingamendments A11 and A12 Household and similarelectrical appliances Safety Part 2-75: Particular requirements forcommercial dispensing appliances andvending machinesICS 55.230; 97.030g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g

2、40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A2:2008CENELEC National forewordThis British Standard is the UK implementation of EN 60335-2-75:2004+A2:2008, incorporating A11:2006 and A12:2010. It is derived from IE

3、C 60335-2-75:2002, incorporating amendments 1:2004 and 2:2008. It supersedes BS EN 60335-2-75:2004+A1:2005,which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment

4、. For example, text altered by IEC amendment A1 is indicated by !“.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . Where a common modification has been introduced by amen

5、dment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by hi.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee

6、 CPL/61/5, Commercial catering equipment.A list of organizations represented on this Subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a B

7、ritish Standard cannot confer immunity from legal obligations.BS EN 60335-2-75:2004+A2:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 September 2004 BSI 2011ISBN 978 0 580 63034 7Amendments/corrigenda issued since publicationAmd. No.

8、Date Comments 15629 25 May 2005 Implementation of IEC amendment 1:2004 with CENELEC endorsement A1:200516913 28 February 2007 Implementation of CENELEC amendment A11:200631 July 2010 Implementation of CENELEC amendment A12:201031 August 2011 Implementation of IEC amendment 2:2008 with CENELEC endors

9、ement A2:2008EUROPEAN STANDARD EN 60335-2-75:2004+A2NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Bruss

10、els 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. ICS 55.230 Supersedes EN 60335-2-63:1993 and EN 60335-2-75:2002English version Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispe

11、nsing appliances and vending machines Appareils lectrodomestiques et analogues Scurit Partie 2-75: Rgles particulires pour les distributeurs commerciaux avec ou sans moyen de paiement Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-75: Besondere Anforderungen fr Ausgabege

12、rte und Warenautomaten fr den gewerblichen Gebrauch Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German

13、). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Cz

14、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. + A11 August 2006 Ref. No. EN 60335-2-75:2004+A1:2005 E

15、This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. + A12 January 2010 October 2008Forewo

16、rd The text of the International Standard IEC 60335-2-75:2002, prepared by the IEC Technical Committee 61, together with the common modifications prepared by CENELEC TC 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-75 on 2004-03-01. This European Stan

17、dard replaces EN 60335-2-63:1993 and EN 60335-2-75:2002. The following dates are applicable: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-03-01 date on which the national standards conflicting with t

18、he EN have to be withdrawn (dow) 2007-03-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also t

19、o be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for commercial el

20、ectric dispensing appliances and vending machines. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. N

21、OTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclau

22、se; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roma

23、n type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. The

24、re are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. BS EN 60335-2-75:2004+A2:2008EN 60335-2-75:2004+A2:2008 (E) 2 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are full

25、y covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant es

26、sential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the international Standard IEC 60335-2-75:2002 was approved by CENELEC as a European Standard with agreed common m

27、odifications. Foreword to amendment A1 The text of document 61/2743/FDIS, future amendment 1 to IEC 60335-2-75:2002, prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendm

28、ent A1 to EN 60335-2-75:2004 on 2004-12-01. The following dates are applicable: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-09-01 date on which national standards conflicting with the amendme

29、nt have to be withdrawn (dow) 2007-12-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-75:2004. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of am

30、endment 1:2004 to the International Standard IEC 60335-2-75:2002 was approved by CENELEC as an amendment to the European Standard without any modification. Foreword to amendment A11When discussing the comments received during the voting procedure for prEN 60335-2-75 at the Balsthal meeting of CENELE

31、C TC 61 in June 2004, the Italian national committee was asked to prepare a firm proposal for an amendment to be submitted to the Unique Acceptance Procedure. This proposal, document CENELEC/TC 61/IT0264/NP, was discussed during the Milan meeting of CENELEC TC 61 in November 2004 and was accepted fo

32、r circulation as a draft amendment. The draft was circulated in April 2005 and was approved by CENELEC as amendment A11 to EN 60335-2-75:2004 on 2005-12-06. The following dates are applicable: latest date by which the amendment has to be implemented at national level by publication of an identical n

33、ational standard or by endorsement (dop) 2006-12-01 date on which national standards conflicting with the amendment have to be withdrawn (dow) 2006-12-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-75:2004. There are no special national conditions causing a deviati

34、on from this amendment. There are no national deviations from this amendment. BS EN 60335-2-75:2004+A2:2008EN 60335-2-75:2004+A2:2008 (E) 3 Foreword This amendment to the European Standard EN 60335-2-75:2004 was prepared by the Technical Committee CENELEC TC 61, Safety of household and similar elect

35、rical appliances. A proposal for this amendment was discussed during the Kista meeting of CENELEC TC 61 in June 2008, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated in November 2008 and was approved by CENELEC as amendment A12 to E

36、N 60335-2-75:2004 on 2009-11-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the

37、 amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-11-01 _ to amendment A12Foreword to amendment A2The text o

38、f document 61/3643/FDIS, future amendment 2 to IEC 60335-2-75:2002, prepared by IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60335-2-75:2004 on 2008-08-01. The following dates are ap

39、plicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2011-08-01 This amendment supplement

40、s or modifies the corresponding clauses of EN 60335-2-75:2004. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed v

41、ersion. _ Endorsement notice The text of amendment 2:2008 to the International Standard IEC 60335-2-75:2002 was approved by CENELEC as an amendment to the European Standard without any modification. p In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized

42、as EN ISO 13732-1:2006 (not modified). _ BS EN 60335-2-75:2004+A2:2008EN 60335-2-75:2004+A2:2008 (E) 4 INTRODUCTIONIt has been assumed in the drafting of this International Standard that the execution of itsprovisions is entrusted to appropriately qualified and experienced persons.This standard reco

43、gnizes the internationally accepted level of protection against hazards suchas electrical, mechanical, thermal, fire and radiation of appliances when operated as innormal use taking into account the manufacturers instructions. It also covers abnormalsituations that can be expected in practice and ta

44、kes into account the way in which electromagnetic phenomena can affect the safe operation of appliances.This standard takes into account the requirements of IEC 60364 as far as possible so thatthere is compatibility with the wiring rules when the appliance is connected to the supplymains. However, n

45、ational wiring rules may differ.If an appliance within the scope of this standard also incorporates functions that are coveredby another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, asfar as is reasonable. If applicable, the influence of one function on the other

46、is taken intoaccount.An appliance that complies with the text of this standard will not necessarily be considered tocomply with the safety principles of the standard if, when examined and tested, it is found tohave other features that impair the level of safety covered by these requirements.An appli

47、ance employing materials or having forms of construction differing from those detailedin the requirements of this standard may be examined and tested according to the intent ofthe requirements and, if found to be substantially equivalent, may be considered to complywith the standard.BS EN 60335-2-75

48、:2004+A2:2008EN 60335-2-75:2004+A2:2008 (E) 5 !“When a part 2 standard does not include additional requirements to cover hazards dealt witPart 1, Part 1 applies.NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it isnot necessary to specify par

49、ticular requirements for the appliance in question over and above the general requirements.This standard is a product family standard dealing with the safety of appliances and takesprecedence over horizontal and generic standards covering the same subject.NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken intoconsideration when developing the general and particular requirements for the IEC 60335 series of standards. Forexample, i