EN 60335-2-80-2003 en Household and similar electrical appliances - Safety Part 2-80 Particular requirements for fans (Incorporates Amendment A2 2009)《家用和类似用途电器的安全 第2-80部分 风扇的特殊要求 .pdf

1、BRITISH STANDARD BS EN 60335-2-80:2003 Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans ICS 23.120 +A2:2009National foreword This British Standard is the UK implementation of EN 60335-2-80:2003+A2:2009. It is identical with IEC 60335-2-80:2002, incorpora

2、ting amendments 1:2004 and 2:2008. It supersedes BS EN 60335-2-80:2003+A1:2004, which will be withdrawn on 1 March 2014. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For ex

3、ample, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorised appliance group. A list of organizations represented on this sub

4、committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60335-2-80:2003+A

5、2:2009 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 July 2003 BSI 2010 Amendments/corrigenda issued since publication Amd. No. Date Comments 15201 16 July 2007 Implementation of IEC amendment 1:2004 with CENELEC endorsement A1:2004 31 M

6、arch 2010 Implementation of IEC amendment 2:2008 with CENELEC endorsement A2:2009 ISBN 978 0 580 60598 7 EUROPEAN STANDARD EN 60335-2-80:2003+A2 NORME EUROPENNE EUROPISCHE NORM March 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

7、Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-80:2003 E ICS 23.120 Supersedes EN 60335-2-80:1997English ver

8、sion Household and similar electrical appliances - Safety Part 2-80: Particular requirements for fans (IEC 60335-2-80:2002)Appareils lectrodomestiques et analogues - Scurit Partie 2-80: Rgles particulires pour les ventilateurs (CEI 60335-2-80:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch u

9、nd hnliche Zwecke Teil 2-80: Besondere Anforderungen fr Ventilatoren (IEC 60335-2-80:2002) This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

10、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Germ

11、an). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus,

12、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of the International Standard IEC 60

13、335-2-80:2002 (61/2165/FDIS), prepared by the IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-80 on 2003-03-01. This European Standard replaces EN 60335-2-80:1997. The following dates are applicable: - latest date by which the EN

14、 has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-03-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 This part 2 has to be used in conjunction with EN 60335-1, Household and simil

15、ar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revi

16、sion of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric fans. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. W

17、hen this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in

18、 a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2

19、 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no sp

20、ecial national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ BS EN 60335-2-80:2003+A2:2009 Page 2 EN 60335-2-80:2003+A2:

21、2009Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC,

22、has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement n

23、otice The text of the International Standard IEC 60335-2-80:2002 was approved by CENELEC as a European Standard without any modification. _ Foreword to amendment A1 The text of document 61/2538/FDIS, future amendment 1 to IEC 60335-2-80:2002, prepared by the IEC Technical Committee 61, Safety of hou

24、sehold and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-80:2003 on 2004-03-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of

25、 an identical national standard or by endorsement (dop) 2004-12-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2007-03-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-80:2003. There are no special national conditions

26、causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2004 to the International Standard IEC 60335-2-80:2002 was approved by CENELEC as an amendment to the European Standard without any modification. BS EN 60335-2-

27、80:2003+A2:2009 Page 3 EN 60335-2-80:2003+A2:2009Foreword to amendment A2 The text of document 61/3644/FDIS, future amendment 2 to IEC 60335-2-80:2002, prepared by IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CEN

28、ELEC as amendment A2 to EN 60335-2-80:2003 on 2009-03-01. The following dates are applicable: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-12-01 date on which national standards conflicting wi

29、th the amendment have to be withdrawn (dow) 2014-03-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-80:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice

30、The text of amendment 2:2008 to the International Standard IEC 60335-2-80:2002 was approved by CENELEC as an amendment to the European Standard without any modification. In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2008 (not mod

31、ified). _ BS EN 60335-2-80:2003+A2:2009 Page 4 EN 60335-2-80:2003+A2:2009 CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Definitions 8 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.9 8 Protection against access to live parts9

32、 9 Starting of motor-operated appliances 9 10 Power input and current .10 11 Heating 10 12 Void .10 13 Leakage current and electric strength at operating temperature10 14 Transient overvoltages .10 15 Moisture resistance 10 16 Leakage current and electric strength.11 17 Overload protection of transf

33、ormers and associated circuits .11 18 Endurance11 19 Abnormal operation 11 20 Stability and mechanical hazards .11 21 Mechanical strength .12 22 Construction.12 23 Internal wiring.13 24 Components .13 25 Supply connection and external flexible cords 13 26 Terminals for external conductors.13 27 Prov

34、ision for earthing .13 28 Screws and connections.13 29 Clearances, creepage distances and solid insulation13 30 Resistance to heat and fire.14 31 Resistance to rusting14 32 Radiation, toxicity and similar hazards14 Annexes .15 Bibliography15 BS EN 60335-2-80:2003+A2:2009 Page 5 EN 60335-2-80:2003+A2

35、:2009INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mec

36、hanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of

37、 appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also i

38、ncorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard will

39、not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those det

40、ailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. When a part 2 standard does not include additional requirements to cover hazards dealt with i

41、n Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard

42、 dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requireme

43、nts for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. BS EN 60335-2-80:2003+A2:2009 Page 6 EN 60335-2-80:2

44、003+A2:2009HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-80: Particular requirements for fans 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric fans for household and similar purposes, their rated voltage being not m

45、ore than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 Examples of fans that are within the scope of this standard are ceiling fans; duct fans; partition fans; pedestal fans; table fans. This standard also applies to separate controls supplied with fans. Appliances not i

46、ntended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended for use in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by app

47、liances that are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 102 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countrie

48、s additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to appliances intended exclusively for industrial purposes; appliances intended to be used in l

49、ocations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); fans incorporated in other appliances. 2 Normative references This clause of Part 1 is applicable. persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervi