1、BRITISH STANDARDBS EN 60335-2-85:2003 +A1:2008Household and similar electrical appliances Safety Part 2-85: Particular requirements for fabric steamersICS 97.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g4
2、4g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60335-2-85:2003+A1:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2003 BSI 2008ISBN 978 0 580 64110 7National forewordThis British Standard is the UK implementati
3、on of EN 60335-2-85:2003+A1:2008. It is identical with IEC 60335-2-85:2002, incorporating amendment 1:2008. It supersedes BS EN 60335-2-85:2003, which will be withdrawn on 1 May 2013.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating cha
4、nges to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/07, Safety of ele
5、ctric appliances, heated appliance group. A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a
6、British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments3 2008November0 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM July 2008 CENELEC European Committee for
7、Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
8、Ref. No. EN 60335-2-85:2003 E ICS 97.060 Supersedes EN 60335-2-85:1998 + A1:2000English version Household and similar electrical appliances - Safety Part 2-85: Particular requirements for fabric steamers (IEC 60335-2-85:2002) Appareils lectrodomestiques et analogues - Scurit Partie 2-85: Rgles parti
9、culires pour les appareils vapeur pour tissus (CEI 60335-2-85:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-85: Besondere Anforderungen fr Dampfgerte fr Stoffe (IEC 60335-2-85:2002) This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are
10、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th
11、e Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the s
12、ame status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Sw
13、itzerland and United Kingdom. EN 60335-2-85:2003+A1 Foreword The text of the International Standard IEC 60335-2-85:2002 (61/2228/FDIS), prepared by IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-85 on 2003-05-01. This European S
14、tandard replaces EN 60335-2-85:1998 + A1:2000. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-05-01 - date on which national standards conflicting with the EN have
15、 to be withdrawn (dow) 2006-05-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken
16、 into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric fabric steamer
17、s. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: -
18、subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, et
19、c.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in
20、 Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Special national conditions causing a deviation from this European Standard are listed in annex ZA and are in addition to those in EN 60335-1. There are no national deviations from this Europe
21、an Standard, other than those listed in Annex ZB to EN 60335-1. _ Page 2BS EN 60335-2-85:2003+A1:2008Foreword to amendment A1 The text of document 61/3537/FDIS, future amendment 1 to IEC 60335-2-85:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, w
22、as submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-85:2003 on 2008-05-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endor
23、sement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-85:2003. There are no special national conditions causing a deviation from this amendment. Th
24、ere are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the International Standard IEC 60335-2-85:2002 was approved by CENELEC as an amendment to the European Standard without any modification. Page 3BS EN 60335-2-85:2003+A1:2008Introduction An invest
25、igation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks a
26、re mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the Inte
27、rnational Standard IEC 60335-2-85:2002 was approved by CENELEC as a European Standard without any modification. _ In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ AAZ xenn (ronitamv)e snoitidnoc lanoitan laice
28、pS :noitiddA sualCe cepSc lanoitan lainoitidno 3.52 eNehtralsdn salCs cele Irt-edoytcnailppa epse c dnalsas cnailppa Ise wiht rabe gnitaeh melestne sllah ylno rep eb ot dednetni ebmyltnena ccennof ot detixw deiri.gn Page 4BS EN 60335-2-85:2003+A1:2008CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative ref
29、erences .7 3 Definitions 7 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.8 8 Protection against access to live parts9 9 Starting of motor-operated appliances 9 10 Power input and current .9 11 Heating 9 12 Void .9 13 Leakage current and ele
30、ctric strength at operating temperature9 14 Transient overvoltages .10 15 Moisture resistance 10 16 Leakage current and electric strength.10 17 Overload protection of transformers and associated circuits .10 18 Endurance10 19 Abnormal operation 10 20 Stability and mechanical hazards .11 21 Mechanica
31、l strength .11 22 Construction.11 23 Internal wiring.11 24 Components .11 25 Supply connection and external flexible cords 12 26 Terminals for external conductors.12 27 Provision for earthing .12 28 Screws and connections.12 29 Clearances, creepage distances and solid insulation 12 30 Resistance to
32、heat and fire.12 31 Resistance to rusting12 32 Radiation, toxicity and similar hazards13 Annexes .14 Bibliography14 Page 5BS EN 60335-2-85:2003+A1:2008INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qu
33、alified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnor
34、mal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances.This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when th
35、e appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as far as is reasonable.
36、 If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that im
37、pair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equival
38、ent, may be considered to comply with the standard. When a Part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is not necessary to
39、specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic
40、standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
41、 ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or art 2 standards. Page 6BS EN 60335-2-85:2003+A1:2008PHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-85: Particular requirements for fabric steamers 1 Scope This clause of Part 1 is replaced by the following. This I
42、nternational Standard deals with the safety of electric fabric steamers intended for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as appliances inte
43、nded to be used by laymen in shops, are within the scope of this standard. NOTE 101 Examples of such appliances are those for use in laundries and dry cleaners. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and ar
44、ound the home. However, in general, it does not take into account NOTE 102 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by the nation
45、al health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust,
46、vapour or gas); electric irons (IEC 60335-2-3); ironers (IEC 60335-2-44); appliances connected to the water mains. 2 Normative references This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable except as follows. 3.1.6 Addition: NOTE 101 For electrode-type appliances,
47、if no current is assigned to the appliance, the rated current is calculated from the rated voltage and the mean value of the power input during the first 2 min of operation, the appliance being supplied at rated voltage and operated under normal operation. persons (including children) whose physical
48、, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. !“Page 7BS EN 60335-2-85:2003+A1:20083.1.9 Replacement: normal operation operation of the appliance in the norm
49、al position of use but away from any surface, with the container filled with water and with any lid closed For electrode-type appliances, the water has a resistivity of approximately 500 cm at a temperature of 20 C NOTE 101 The appropriate resistivity may be obtained by adding sodium chloride to the water. 3.101 fabric steamer appliance for removing creases from garments and fabrics by directing steam at their surface 3.102 electrode-type appliance appliance in which a conductive
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1