EN 60384-13-1-2006 en Fixed capacitors for use in electronic equipment Part 13-1 Blank detail specification - Fixed polypropylene film dielectric metal foil d c capacitors - Assess.pdf

1、BRITISH STANDARDBS EN 60384-13-1:2006Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification Fixed polypropylene film dielectric metal foil d.c. capacitors Assessment level EICS 31.060.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g5

2、4g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Incorporating orrigendumMarch 2009 and EZcBS EN 60384-13-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 20

3、08 BSI 2009National forewordThe UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to i

4、nclude all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationThis British Standard is the UK implementation of EN 60384-13-1:2006. It

5、 is identical to IEC 60384-13-1:2006, incorporating corrigendum March 2009. It supersedes BS EN 131801:1998 and BS QC 301801:1993, which are withdrawn. ISBN 978 0 580 67555 3Date Comments The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Tags altered

6、 by IEC corrigendum March 2009 is indicated in the text by .Implementation of IEC corrigendum March 200930 June 2009 EUROPEAN STANDARD EN 60384-13-1 NORME EUROPENNE EUROPISCHE NORM March 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechni

7、que Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-13-1:2006 E ICS 31.060.30 Supersedes EN 131801:1997English

8、version Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ (IEC 60384-13-1:2006) Condensateurs fixes utiliss dans les quipements lectroniques Partie 13-1: Spcification par

9、ticulire cadre - Condensateurs fixes pour courant continu dilectrique en film de polypropylne armatures en feuilles mtalliques - Niveau dassurance E (CEI 60384-13-1:2006) Festkondensatoren zur Verwendung in Gerten der Elektronik Teil 13-1: Vordruck fr Bauartspezifikation - Festkondensatoren mit eine

10、m Dielektrikum aus Polypropylen und Belgen aus Metallfolien fr Gleichspannung - Qualittsbewertungsstufe E (IEC 60384-13-1:2006) This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

11、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three off

12、icial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical com

13、mittees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd

14、om. Foreword The text of document 40/1621/FDIS, future edition 2 of IEC 60384-13-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-13-1 on 2006-02-01. This European Standard supersedes E

15、N 131801:1997. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-11-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-0

16、2-01 This European Standard makes reference to International Standards. Where the International Standard referred to has been endorsed as a European Standard or a home-grown European Standard exists, this European Standard shall be applied instead. Pertinent information can be found on the CENELEC w

17、eb site. _ Endorsement notice The text of the International Standard IEC 60384-13-1:2006 was approved by CENELEC as a European Standard without any modification. _ EN 60384-13-1:2006 2 Annex ZA has been added by CENELEC. BS EN 60384-3-1:2006FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 13-1:

18、 Blank detail specification Fixed polypropylene film dielectric metal foil d.c. capacitors Assessment level E and EZ Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content o

19、f detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into

20、account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification (1) The “International Electrotechnical Commission“ or the National Standards Organization under whose authori

21、ty the detail specification is drafted. (2) The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. (3) The number and issue number of the IEC or national generic specification. (4) The IEC number of the blank detai

22、l specification. Identification of the capacitor (5) A short description of the type of capacitor. (6) Information on typical construction (when applicable). When the capacitor is not designed for use in printed-board applications, this shall be clearly stated in the detail specification in this pos

23、ition. (7) Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. (8) Application or group of applications covered

24、and/or assessment level. The assessment level(s) to be used in a detail specification shall be selected from the sectional specification, 3.5.4. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not cha

25、nge. (9) Reference data on the most important properties, to allow comparison between the various capacitor types. 3 EN 60384-13-1:2006 BS EN 60384-13-1:2006(1) IEC 60384-13-1-XXX (2) QC 301801-XXX IEC 60384-13-1 (4) QC 301801 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: (3) FIXED P

26、OLYPROPYLENE (5) FILM DIELECTRIC METAL FOIL DC CAPACITORS (6) Outline drawing: (see Table 1) (.angle projection) (7) (Other shapes are permitted within the dimensions given.) Assessment level(s): E (8) Stability class: Information on the availability of components qualified to this detail specificat

27、ion is given in IEC QC 001005 (9) 1 General data 1.1 Recommended method(s) of mounting See IEC 60384-13, 1.4.2. 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions (in mm) Case size reference L H d . When there is no case size reference, Table 1 may be omitted and the dimensions sha

28、ll be given in Table 2, which then becomes Table 1. The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. EN 60384-13-1:2006 4 BS EN 60384-3-1:20061.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (se

29、e Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Maximum a.c. voltage (if applicable) Tangent of loss angle Insulation resistance Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltageaCase size Case size Case si

30、ze Case size (in pF, nF and/or F) aIf different from the rated voltage. 1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc

31、ed document (including any amendments) applies. IEC 60410, Sampling plans and procedures for inspection by attributes IEC 60384-1, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60384-13, Fixed capacitors for use in electronic equipment Part 13: Sectional Specific

32、ation: Fixed polypropylene film dielectric metal foil d.c. capacitors 1.5 Marking The marking of the capacitor and the package shall be in accordance with the requirements of IEC 60384-13, 1.6. The details of the marking of the component and package shall be given in full in the detail specification

33、. 1.6 Ordering information Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum information: a) nominal capacitance; b) tolerance on rated capacitance; c) rated d.c. voltage; d) number and issue reference of the detail specification and

34、style reference. 5 EN 60384-13-1:2006Nominal capacitance BS EN 60384-13-1:20061.7 Certified records of released lots Required/not required. 1.8 Additional information (not for inspection purposes) 1.9 Additional or increased severities or requirements to those specified in the generic and/or section

35、al specification NOTE Additions or increased requirements should be specified only when essential. Table 3 Other characteristics This table is to be used for defining characteristics which are additional to or more severe than those given in the sectional specification. 2 Inspection requirements 2.1

36、 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with the sectional specification, IEC 60384-13, 3.4. 2.1.2 For quality conformance inspection, the test schedule (Table 4) includes sampling, periodicity, severities and requirements. The formation of inspection lots

37、 is covered by IEC 60384-13, 3.5.1. EN 60384-13-1:2006 6 BS EN 60384-3-1:2006Table 4 Test schedule for quality conformance inspection E levelEZ level IL AQL n c Subclause number and testa D or ND c Conditions of testa c Performance requirementsa Group A inspection (lot-by-lot) Subgroup A0 4.2.2 Capa

38、citance 4.2.3 Tangent of loss angle 4.2.1 Voltage proof (Test A) 4.2.4 Insulation resistance (Test A) ND Frequency : 1 kHz for all capacitance values Method: Measuring point 1a Measuring point 1a 100 %d Within specified tolerance As in 4.2.3.2 No breakdown or flashover. Self-healing breakdowns allow

39、ed As in 4.2.4.3 Subgroup A1 ND S-3 2,5%b 0 4.1 Visual examination As in 4.1 Legible marking and as specified in 1.5 of this specification 4.1 Dimensions (gauging) As specified in Table 1 of this specification Subgroup A2 ND S-3 1,0%b 0 4.2.1 Voltage proof (Test A) 4.2.2 Capacitance Method: No break

40、down or flashover Within specified tolerance 4.2.3 Tangent of loss angle As in 4.2.3.2 4.2.4 Insulation resistance (Test A) Method: As in 4.2.4.2 Group B inspection (lot-by-lot) Subgroup B1 ND S-3 2,5%b 0 4.5 Solderability Without ageing Method: . Good tinning as evidenced by free flowing of the sol

41、der with wetting of the termina-tions or solder shall flow within . s, as applicable 4.14 Solvent resistance of the marking (if applicable) Solvent: . Solvent temperature: . Method 1 Rubbing material: cotton woolRecovery time: See detail specification 7 EN 60384-13-1:2006BS EN 60384-13-1:2006Table 4

42、 (continued) Subclause number and testaD orND c Conditions of testa Sample size and criterion of acceptability cPerformance requirementsa E EZ p n c p n c Group C inspection (periodic) Subgroup C1A Part of sample of Subgroup C1 D 6 9 1 6 5 0 4.1 Dimensions (detail) See detail specification 4.3.1 Ini

43、tial measurements Capacitance Tangent of loss angle: 4.3 Robustness of terminationsVisual examination No visible damage 4.4 Resistance to soldering heat Method: Recovery: 1 h to 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance C/C within limit for relevan

44、t stability class at upper category temperature as specified in 2.2.4 of the sectional specification and compared to the value measured in 4.3.1 4.13 Component solvent resistance (if applicable) Solvent: . Solvent temperature: . Method 2 Recovery time: See detail specification Subgroup C1B Other par

45、t of sample of Subgroup C1 D 6 18 1 6 5 0 4.6.1 Initial measurements Capacitance Tangent of loss angle: 4.6 Rapid change of temperature TA= Lower category temperature TB= Upper category temperature Five cycles Duration t = 30 min Visual examination No visible damage 4.7 Vibration Method of mounting:

46、 see 1.1 of this specification Frequency range: . Hz to . Hz Amplitude 0,75 mm or acceleration 100 m/s2(whichever is the less severe) Total duration: 6 h EN 60384-13-1:2006 8 BS EN 60384-3-1:2006Table 4 (continued) Subclause number and testaD or NDc Conditions of testa Sample size and criterion of a

47、cceptability cPerformance requirementsa E EZ p n c p n c 4.7.2 Final inspection Visual examination No visible damage Capacitance C/C within limit for relevant stability class at upper category temperature as specified in 2.2.4 of the sectional specification and compared to the value measured in 4.6.

48、1 4.8 Bump (or shock, see 4.9) Method of mounting: see 1.1 of this specification Number of bumps: Acceleration: m/s2Duration of pulse: ms 4.9 Shock (or bump, see 4.8) Method of mounting: see 1.1 of this specification Acceleration: m/s2Duration of pulse: ms 4.8.3 Final or measurements 4.9.3 Visual ex

49、amination No visible damage Capacitance C/C within limit for relevant stability class at upper category temperature as specified in 2.2.4 of the sectional specification and compared to the value measured in 4.7.2 Tangent of loss angle As in 4.2.3.2 Subgroup C1 Combined sample of specimens of Subgroups C1A and C1B D 6 27 2 6 10 0 4.10 Climatic sequence 4.10.2 Dry heat Temperature: upper category tempe