EN 60404-1-2017 en Magnetic materials - Part 1 Classification.pdf

1、Magnetic materialsPart 1: ClassificationBS EN 60404-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60404-1:2017. It isidentical to IEC 60404-1:2016. It supersedes BS IEC 60404-1:2000 which i

2、swithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/108, Magnetic Alloys and Steels.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa co

3、ntract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87029 3ICS 29.030Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the autho

4、rity of theStandards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60404-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60404-1 January 2017 ICS 29.030 English Version Magnetic materials - Part 1: C

5、lassification (IEC 60404-1:2016) Matriaux magntiques - Partie 1: Classification (IEC 60404-1:2016) Magnetische Werkstoffe - Teil 1: Klassifizierung (IEC 60404-1:2016) This European Standard was approved by CENELEC on 2016-11-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regul

6、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC m

7、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official vers

8、ions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, th

9、e Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELE

10、C Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60404-1:2017 E BS EN 60404-1:2017EN 60404-1:2017 2 European foreword The text of document 68/533/CDV, future edition 3 of IE

11、C 60404-1, prepared by IEC/TC 68 “Magnetic alloys and steels“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60404-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national st

12、andard or by endorsement (dop) 2017-08-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not

13、 be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60404-1:2016 was approved by CENELEC as a European Standard without any modification. BS EN 60404-1:2017EN 60404-1:2017 3 Annex ZA (normative) Normative references to int

14、ernational publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

15、 of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is a

16、vailable here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60050-121 - International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism - - IEC 60050-151 - International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices - - IEC 60050-221 - Internation

17、al Electrotechnical Vocabulary (IEV) - Chapter 221: Magnetic materials and components - - IEC 60401-3 - Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores EN 60401-3 -

18、IEC 60404-2 - Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame EN 60404-2 - IEC 60404-3 - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means

19、 of a single sheet tester - - IEC 60404-4 - Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel EN 60404-4 - IEC 60404-6 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials a

20、t frequencies in the range 20 Hz to 200 kHz by the use of ring specimens EN 60404-6 - IEC 60404-7 - Magnetic materials - Part 7: Method of measurement of the coercivity of magnetic materials in an open magnetic circuit - - BS EN 60404-1:2017EN 60404-1:2017 4 Publication Year Title EN/HD Year IEC 604

21、04-8-1 - Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials EN 60404-8-1 - IEC 60404-8-3 - Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the

22、semi-processed state - - IEC 60404-8-4 - Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state - - IEC 60404-8-5 - Magnetic materials - Part 8: Specifications for individual materials

23、- Section 5: Specification for steel sheet and strip with specified mechanical properties and magnetic permeability - - IEC 60404-8-6 - Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials EN 60404-8-6 - IEC 60404-8-7 - Magnetic materials - Part 8

24、-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state - - IEC 60404-8-8 - Magnetic materials - Part 8: Specifications for individual materials - Section 8: Specification for thin magnetic steel strip for use a

25、t medium frequencies - - IEC 60404-8-9 - Magnetic materials - Part 8: Specification for individual materials - Section 9: Standard specification for sintered soft magnetic materials - - IEC 60404-8-10 - Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iro

26、n and steel) for use in relays - - IEC 60404-10 - Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies - - ISO 4948-1 - Steels; Classification - Part 1: Classification of steels into unalloyed and alloy steels based on

27、chemical composition - - BS EN 60404-1:2017 2 IEC 60404-1:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Magnetically soft materials (coercivity 1 kA/m) . 8 4.1 Class A Irons . 8 4.1.1 Reference documents 8 4.1.2 Chemical composition 8 4.1.3 Basis

28、of subclassification . 8 4.1.4 Available forms 8 4.1.5 Physical characteristics . 8 4.1.6 Main applications . 8 4.2 Class B Low carbon mild steels 9 4.2.1 Class B1 Bulk material 9 4.2.2 Class B2 Flat material. 9 4.3 Class C Silicon steels 10 4.3.1 Class C1 Bulk material . 10 4.3.2 Class C2 Flat mate

29、rial 11 4.4 Class D Other steels 16 4.4.1 Class D1 Bulk material . 16 4.4.2 Class D2 Flat material 18 4.4.3 Class D3 Stainless steels . 18 4.5 Class E Nickel-iron alloys 19 4.5.1 Class E1 Nickel content 70 % to 85 % 19 4.5.2 Class E2 Nickel content 54 % to 68 % 20 4.5.3 Class E3 Nickel content 40 %

30、to 51 % 21 4.5.4 Class E4 Nickel content 35 % to 40 % 22 4.5.5 Class E5 Nickel content 29 % to 33 % 23 4.6 Class F Iron-cobalt alloys . 24 4.6.1 Class F1 Cobalt content 47 % to 50 % 24 4.6.2 Class F2 Cobalt content 35 % . 24 4.6.3 Class F3 Cobalt content 23 % to 30 % 25 4.7 Class G Other alloys 26 4

31、.7.1 Class G1 Aluminium-iron alloys 26 4.7.2 Class G2 Aluminium-silicon-iron alloys . 27 4.8 Class H Magnetically soft materials made by powder metallurgical techniques 27 4.8.1 Class H1 Soft ferrites 27 4.8.2 Class H2 Magnetically soft sintered materials . 29 4.8.3 Class H3 Powder composites . 29 4

32、.9 Class I Amorphous soft magnetic materials 30 4.9.1 General . 30 4.9.2 Class I1 Iron-based amorphous alloys 30 4.9.3 Class I2 Cobalt-based amorphous alloys 31 4.9.4 Class I3 Nickel-based amorphous alloys . 32 4.10 Class J Nano-crystalline soft magnetic materials 33 BS EN 60404-1:2017IEC 60404-1:20

33、16 IEC 2016 3 4.10.1 Reference document 33 4.10.2 Production process 33 4.10.3 Chemical composition 33 4.10.4 Basis of subclassification . 33 4.10.5 Available forms 33 4.10.6 Physical characteristics . 33 4.10.7 Main applications . 34 5 Magnetically hard materials (coercivity 1 kA/m) 34 5.1 Class Q

34、Magnetostrictive alloys Rare earth iron alloys (Class Q1) 34 5.1.1 Reference document 34 5.1.2 Chemical composition 34 5.1.3 Basis of subclassification . 34 5.1.4 Available forms 34 5.1.5 Physical characteristics . 34 5.1.6 Main applications . 35 5.2 Class R Magnetically hard alloys 35 5.2.1 Class R

35、1 Aluminium-nickel-cobalt-iron-titanium (AlNiCo) alloys 35 5.2.2 Class R3 Iron-cobalt-vanadium-chromium (FeCoVCr) alloys . 36 5.2.3 Class R5 Rare earth cobalt (RECo) alloys 36 5.2.4 Class R6 Chromium-iron-cobalt (CrFeCo) alloys . 37 5.2.5 Class R7 Rare earth-iron-boron (REFeB) alloys 38 5.3 Class S

36、Magnetically hard ceramics Hard ferrites (Class S1) 39 5.3.1 Reference document 39 5.3.2 Chemical composition and manufacturing method . 39 5.3.3 Basis of subclassification . 39 5.3.4 Available forms 39 5.3.5 Physical characteristics . 40 5.3.6 Main applications . 40 5.4 Class T Other magnetically h

37、ard materials Martensitic steels (Class T1) . 40 5.4.1 Reference document 40 5.4.2 Composition 40 5.4.3 Basis of subclassification . 40 5.4.4 Available forms 40 5.4.5 Physical characteristics . 40 5.4.6 Main applications . 41 5.5 Class U Bonded magnetically hard materials 41 5.5.1 General . 41 5.5.2

38、 Class U1 Bonded aluminium-nickel-cobalt-iron-titanium (AlNiCo) magnets 41 5.5.3 Class U2 Bonded rare earth-cobalt (RECo) magnets 42 5.5.4 Class U3 Bonded neodymium-iron-boron (REFeB) magnets . 42 5.5.5 Class U4 Bonded hard ferrite magnets 43 5.5.6 Class U5 Bonded rare earth-iron-nitrogen magnets .

39、44 BS EN 60404-1:2017 4 IEC 60404-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 1: Classification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees

40、(IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Repor

41、ts, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and no

42、n-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements o

43、f IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are

44、accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote intern

45、ational uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in th

46、e latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users

47、 should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other

48、 damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Us

49、e of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60404-1 has been prepared by IEC technical committee 68: Magn