1、BRITISH STANDARD BS EN 60442:1999 IEC 60442:1998 Incorporating Amendment No. 1 Electric toasters for household and similar purposes Methods for measuring the performance The European Standard EN 60442:1998, with the incorporation of amendment A1:2003, has the status of a British Standard ICS 97.040.
2、50 BS EN 60442:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and c o m e s i n t o e f f e c t o n 15 January 1999 BSI 5 September 2003 ISBN 0 580 30865 0 National foreword T
3、his British Standard is the English language version of EN 60442:1998, including amendment A1:2003. It is identical with IEC 60442:1998, including amendment 1:2003. It supersedes BS 3999-9:1993 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee CPL/59, P
4、erformance of household electrical appliances, to Subcommittee CPL/59/7, Small kitchen appliances, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement these inter
5、national or European publications may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necess
6、ary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European subcommittee any enquiries on the int
7、erpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI co
8、pyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14466 5 September 2003 Addition of Annex BEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60442 November 1998 + A1 April 2003 ICS 97.040.50 English v
9、ersion Electric toasters for household and similar purposes Methods for measuring the performance (includes amendment A1:2003) (IEC 60442:1998 + A1:2003) Grille-pain lectriques pour usages domestiques et analogues Mthode de mesure de laptitude la fonction (inclut lamendement A1:2003) (CEI 60442:1998
10、 + A1:2003) Elektrische Haushalt-Brotrster Verfahren zur Messung der Gebrauchseigenschaften (enthlt nderung A1:2003) (IEC 60442:1998 + A1:2003) This European Standard was approved by CENELEC on1998-10-01. Amendment A1 was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with th
11、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat o
12、r to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the offic
13、ial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENEL
14、EC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide
15、 for CENELEC members. Ref. No. EN 60442:1998 + A1:2003 EEN 60442:1998 BSI 5 September 2003 2 Foreword The text of document 59G/85/FDIS, future edition 2 of IEC 60442, prepared by SC 59G, Small kitchen appliances, of IEC TC 59, Performance of household electrical appliances, was submitted to the IEC-
16、CENELEC parallel vote and was approved by CENELEC as EN 60442 on 1998-10-01. The following dates were fixed: Endorsement notice The text of the International Standard IEC 60442:1998 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A1 The text of document
17、 59G/127/FDIS, future amendment 1 to IEC 60442:1998, prepared by SC 59G, Small kitchen appliances, of IEC TC 59, Performance of household electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60442:1998 on 2003-03-01. The following da
18、tes were fixed: Annexex designated “informative” are given for information only. In this standard, Annex B is informative. Endorsement notice The text of amendment 1:2003 to the International Standard IEC 60442:1998 was approved by CENELEC as an amendment to the European Standard without any modific
19、ation. Contents Page Foreword 2 1 Scope and object 3 2 Normative reference 3 3 Definitions 3 4 General conditions for measurements 4 5 Overall dimensions 4 6 Length of the flexible cord 4 7 Mass of the appliance 4 8 Number and dimensions of the toasting chambers (radiant toasters), toasting surfaces
20、 (contact toasters) 4 9 Force necessary to operate the bread carriage 5 10 Bread to be used for the tests on toasters 5 11 Browning control setting 5 12 Toasting 5 13 Toasting time 6 14 Evenness of browning 6 15 Browning control characteristics 7 16 Energy consumption 8 17 Temperature of the side su
21、rfaces 8 18 Provision for the removal of bread crumbs 8 19 Bread carriage 8 Annex A (normative) Schedule for the presentation of the toasting results 9 Annex B (informative) Minimum information available at the point of sale 9 Table 1 7 latest date by which the EN has to be implemented at national l
22、evel by publication of an identical national standard or by endorsement (dop) 1999-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001-07-01 latest date by which the amendment has to be implemented at national level by publication of an identical
23、 national standard or by endorsement (dop) 2003-12-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2006-03-01EN 60442:1998 BSI 5 September 2003 3 1 Scope and object This International Standard applies to electric toasters for household and sim
24、ilar use. The purpose of this standard is to state and define the main performance characteristics for toasters, which are of interest to the user, to describe the standard methods for measuring these characteristics and to give some guidelines for the evaluation of test results. Taking into account
25、 the low grade of accuracy and repeatability, due to variations in time and origin of test materials and ingredients and to the influence of the subjective judgement of test operators, the described test methods may be applied more reliably for comparative testing of a number of appliances at approx
26、imately the same time, in the same laboratory, by the same operator and with the same utensils, rather than for testing of single appliances in different laboratories. This standard is not concerned with safety. It does not apply to appliances designed exclusively for commercial or industrial use. 2
27、 Normative reference The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All normative documents are subject to revision, and parties to agreemen
28、ts based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. BS 3999, “Shade chart” Part 5 C. 1983. 3 Definiti
29、ons For the purpose of this International Standard the following definitions apply. 3.1 radiant toaster toaster intended for toasting slices of bread by radiant heat. The slices are toasted either on one side or both sides at a time NOTE Radiant toasters may be provided with attachments for heating
30、rolls and for toasting sandwiches. 3.2 contact (horizontal) toaster toaster with one or more heating surfaces which can be brought into contact with slices of bread NOTE Contact (horizontal) toasters are intended for toasting only on one side at a time. Some contact toasters heat both sides at the s
31、ame time, particularly when toasting sandwiches. 3.3 roll heating device device for holding rolls to be heated on the toaster NOTE This device can be built in or supplied with the toaster. 3.4 toasting control device device that automatically terminates the toasting process 3.5 bread carriage the pa
32、rt of the toaster that supports the bread and releases it at the end of the toasting process 3.6 browning control range a certain setting on a scale that can be marked with number, symbols or shades of colourEN 60442:1998 4 BSI 5 September 2003 3.7 toasting chamber space intended for the loading of
33、the slices of bread 3.8 evenness of browning the brownness visually determined and averaged over one surface of the toasted slice of bread in each individual case 3.9 toasting degree average brownness reached by the slices of bread at the end of the toasting process 3.10 toasting range range of the
34、toasting degree from the minimum brownness to the maximum brownness 4 General conditions for measurements Unless otherwise specified, the measurements shall be made under the following conditions: Ambient temperature: 20 C 5 C. Electrical supply: the measurements shall be made at rated frequency and
35、 at a voltage which is within 0,5 % of the rated voltage or the mean of the rated voltage range. NOTE If the rated voltage differs from the nominal supply voltage of the country concerned, measurements carried out at rated voltage may be misleading. Therefore, for comparative testing the voltage use
36、d for the tests should conform to the nominal supply voltage and this should be reported. Testing room: substantially draught free. Placing of the appliances: at a distance of a least 30 cm away from walls, on a dull black painted wooden support. Unless otherwise specified, toasters with roll heatin
37、g device or sandwiches device are tested without such devices. 5 Overall dimensions The overall dimensions of the appliance (length, height and width, doors, if any, closed, including any controls, handles or other protrusions) shall be measured and the dimensions shall be indicated in millimetres.
38、6 Length of the flexible cord The length between the point of entry of the cord to the toaster and the entry point in the plug, including any cord guard, shall be measured and indicated in metres, to the nearest 0,05 m. The existence of a cord storage device or a cord chamber for the supply cord sha
39、ll be stated. 7 Mass of the appliance The mass of the toaster, without accessories and with flexible cord and plug if attached, is determined and indicated in kilograms, to the nearest 0,1 kg. 8 Number and dimensions of the toasting chambers (radiant toasters), toasting surfaces (contact toasters) T
40、he number of the toasting chambers into which the bread slices can be placed to be toasted on both sides at a time, or of the toasting surfaces on which the bread slices are put to be toasted on one side at a time, shall be determined and indicated.EN 60442:1998 BSI 5 September 2003 5 For each toast
41、ing chamber or toasting surface, the dimensions (length, height, width) which are applicable, shall be determined and indicated in millimetres. In case of variable toasting chambers and toasting surfaces, the maximum useable dimensions are given. The dimensions of the largest slice of bread, having
42、a thickness of 12 mm, which can be inserted into the toasting chamber without force or which can be placed on the toasting surface, shall be determined and indicated in millimetres. The number of standard bread slices having dimensions of 100 mm 100 mm 12 mm which can be toasted at one time, on both
43、 sides or on one side only, shall be determined and indicated. 9 Force necessary to operate the bread carriage The force necessary to operate the bread carriage to start the toasting process shall be measured (e.g. by using a spring balance) and indicated, rounded off to the nearest newton. 10 Bread
44、 to be used for the tests on toasters The measurements according to Clauses 11 to 14 are made with factory-made white bread common in the relevant country, but care has to be taken that, if more than one loaf is necessary, bread from the same batch is used and treated the same way. The dimensions of
45、 the bread shall be 100 mm 100 mm 12 mm 1 mm. The bread is put into suitable plastic bags and stored in a draught-free room, away from direct sunlight at an ambient temperature of 20 C 2 C. The end slices of each loaf are discarded. NOTE The storage in plastic bags is necessary to avoid moisture los
46、s, since the duration of the test is considerably longer than normal toasting time. For all the following tests, the bread slices are used with crusts. 11 Browning control setting These tests have to be carried out with minimum and maximum load as indicated in the manufacturers instructions. 11.1 Br
47、owning control setting for bread The browning control is set to a medium position or to the position for medium brownness (golden brown) declared by the manufacturer. Starting from “cold” with the toaster fully loaded, two toasting cycles are made, with an interval of 15 s or longer if recommended b
48、y the manufacturer. If the result of “golden brown” is not reached, the appliance is cooled down completely and two further cycles are made with an appropriate corrected setting. 11.2 Browning control setting for sandwiches The same procedure of 11.1 is applied, but the toaster is loaded with sandwi
49、ches made with two slices of bread filled with one slice of appropriate cheese, having approximately an area equal to one slice of bread and a thickness of approximately 5 mm. NOTE Processed cheese and other cheese which readily melts on heating (such as sliced cheese with a fat content of 75 % 5% o r Emmenthal cheese) are suitable, but care has to be taken that the same cheese of the same batch of production is used for one complete test. Th
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1