EN 60603-7-82-2016 en Connectors for electronic equipment - Part 7-82 Detail specification for 8-way 12 contacts shielded free and fixed connectors for data transmission with frequ.pdf

1、Connectors for electronic equipmentPart 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHzBS EN 60603-7-82:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewor

2、dThis British Standard is the UK implementation of EN 60603-7-82:2016. It isidentical to IEC 60603-7-82:2016. The UK participation in its preparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations re

3、presented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 5

4、80 85815 4ICS 31.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STAN

5、DARDBS EN 60603-7-82:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60603-7-82 December 2016 ICS 31.220.10 English Version Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequenci

6、es up to 2 000 MHz (IEC 60603-7-82:2016) Connecteurs pour quipements lectroniques - Partie 7-82: Spcification particulire pour les fiches et les embases crantes 8 voies et 12 contacts pour la transmission de donnes des frquences jusqu 2 000 MHz (IEC 60603-7-82:2016) Steckverbinder fr elektronische E

7、inrichtungen - Teil 7-82: Bauartspezifikation fr geschirmte freie und feste Steckverbinder, 8polig, 12 Kontakte fr Datenbertragungen bis 2 000 MHz (IEC 60603-7-82:2016) This European Standard was approved by CENELEC on 2016-09-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Reg

8、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC

9、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ve

10、rsions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

11、the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Mana

12、gement Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60603-7-82:2016 E BS EN 60603-7-82:2016EN 60603-7-82:2016 2 European foreword The text of document 48B/2497/FDIS, future edition 1

13、 of IEC 60603-7-82, prepared by SC 48B “Electrical connectors“, of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60603-7-82:2016. The following dates are fixed: latest d

14、ate by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-06-29 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-09-29 Attention is drawn to the possibility

15、that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60603-7-82:2016 was approved by CENELEC as a European Standard

16、 without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60512-2-1 NOTE Harmonized as EN 60512-2-1. IEC 60603-7-2 NOTE Harmonized as EN 60603-7-2. IEC 60603-7-3 NOTE Harmonized as EN 60603-7-3. IEC 60603-7-4 NOTE Harm

17、onized as EN 60603-7-4. IEC 60603-7-5 NOTE Harmonized as EN 60603-7-5. IEC 60603-7-41 NOTE Harmonized as EN 60603-7-41 IEC 60603-7-51 NOTE Harmonized as EN 60603-7-51 IEC 60603-7-71 NOTE Harmonized as EN 60603-7-71 IEC 60603-7-81 NOTE Harmonized as EN 60603-7-81 BS EN 60603-7-82:2016EN 60603-7-82:20

18、16 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cite

19、d applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest version

20、s of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60512-25-9 - Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests Test 25i: Alien crosstalk EN 60512-25-9 - IEC 60512-26-100 2008 Conn

21、ectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g EN 60512-26-100 2008 + A1 2011 + A1 2011 IEC 60512-27-100 - Connectors for electronic equipment - Tes

22、ts and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g EN 60512-27-100 - IEC 60512-28-100 - 1)Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC

23、 61076-3 series connectors - Tests 28a to 28g - - IEC 60603-7 2008 Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors EN 60603-7 2009 IEC 60603-7-1 2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, sh

24、ielded, free and fixed connectors EN 60603-7-1 2011 1) At draft stage. IEC 60512-28-100 (future ed. 2.0) will replace IEC 60512-28-100:2013, Connectors for electronic equipment Tests and measurements Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors

25、 Tests 28a to 28g, harmonized as EN 60512-28-100:2013 (not modified). BS EN 60603-7-82:2016EN 60603-7-82:2016 4 Publication Year Title EN/HD Year IEC 60603-7-7 2010 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmissi

26、on with frequencies up to 600 MHz EN 60603-7-7 2010 IEC 61156 series Multicore and symmetrical pair/quad cables for digital communications - - IEC 62153-4-15 - Metallic communication cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance an

27、d screening attenuation - or coupling attenuation with triaxial cell - - BS EN 60603-7-82:2016 2 IEC 60603-7-82:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 Common features and isometric view . 8 5 Cable terminations and interna

28、l connections Fixed and free connectors . 8 6 Gauges . 8 7 Characteristics 9 7.1 General . 9 7.2 Pin and pair grouping assignment 9 7.3 Classification into climatic category . 9 7.4 Electrical characteristics 9 7.5 Transmission characteristics . 9 7.5.1 General . 9 7.5.2 Insertion loss . 10 7.5.3 Re

29、turn loss 10 7.5.4 Propagation delay 10 7.5.5 Delay skew 10 7.5.6 NEXT . 11 7.5.7 Power sum NEXT (for information only) 11 7.5.8 FEXT . 11 7.5.9 Power sum FEXT (for information only). 11 7.5.10 Transverse conversion loss 12 7.5.11 Transverse conversion transfer loss . 12 7.5.12 Coupling attenuation

30、12 7.5.13 Power sum alien (exogenous) NEXT . 12 7.5.14 Power sum alien (exogenous) FEXT . 13 7.6 Mechanical . 13 7.6.1 Mechanical operation . 13 7.6.2 Effectiveness of connector coupling devices . 13 7.6.3 Insertion and withdrawal forces 13 8 Tests and test schedule . 13 8.1 General . 13 8.2 Arrange

31、ment for contact resistance test . 13 8.3 Arrangement for vibration test . 13 8.4 Test procedures and measuring methods . 13 8.5 Preconditioning . 14 8.6 Wiring and mounting of specimens 14 8.6.1 Wiring 14 8.6.2 Mounting 14 8.7 Test schedules 14 8.7.1 General . 14 8.7.2 Basic (minimum) test schedule

32、 . 14 8.7.3 Full test schedule . 14 Bibliography . 17 BS EN 60603-7-82:2016IEC 60603-7-82:2016 IEC 2016 3 Figure 1 Diagram of the interrelation of the documents . 6 Table 1 Test group EP . 15 BS EN 60603-7-82:2016 4 IEC 60603-7-82:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS

33、FOR ELECTRONIC EQUIPMENT Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all

34、national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Tech

35、nical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory wor

36、k. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)

37、 The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommend

38、ations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any en

39、d user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publica

40、tion shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independe

41、nt certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any pers

42、onal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative ref

43、erences cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible fo

44、r identifying any or all such patent rights. International Standard IEC 60603-7-82 has been prepared by subcommittee 48B: Electrical connectors, of IEC technical committee 48: Electrical connectors and mechanical structures for electrical and electronic equipment. The text of this standard is based

45、on the following documents: FDIS Report on voting 48B/2497/FDIS 48B/2510/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN

46、60603-7-82:2016IEC 60603-7-82:2016 IEC 2016 5 A list of all parts of the IEC 60603 series, under the general title Connectors for electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indi

47、cated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60603-7-82:2016 6 IEC 60603-7-82:2016 IEC 2016 INTRODUCTION IEC 60603-7 is the base s

48、pecification of the whole series. Subsequent specifications do not duplicate information given in the base document, but list only additional requirements. For complete specification regarding a component of a higher number document all lower numbered documents shall be considered as well. The follo

49、wing diagram (Figure 1) shows the interrelation of the documents: Key Indicates reference for dimensions, mechanical and electrical characteristics, tests and test schedules Indicates reference for transmission performance (backward compatibility) Figure 1 Diagram of the interrelation of the documents Unshielded (8 way) Shielded (8 way) (8 way, 12 contacts) 3 MHz 100 MHz 250 MHz 600 MHz IEC 60603-7 IEC 60603-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500