EN 60630-1998 en Maximum lamp outliners for incandescent lamps (Incorporates Amendment A7 2015)《白炽灯最大外形尺寸 包含修改件A6 2009》.pdf

1、BRITISH STANDARD BS EN 60630:1998Maximum lamp outlines for incandescent lampsICS 29.140.20 nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnull nullnull

2、nullnullnullnullnullnullnull nullnullnull+A7 :2015BS EN 60630:1998+A7:2015This British Standard, havingbeen prepared under thedirection of the ElectrotechnicalSector Committee, waspublished under the authorityof the Standards Committeeand comes into effect on15 July 1999 The British Standards Instit

3、ution 2015. Published by BSI Standards Limited 2015Amendments/corrigenda issued since publicationAmd. No. Date Comments 10733 January 2000 Replaces data sheets 60630-IEC-1510-1 and60630-IEC-1540-2 with 60630-IEC-1510-2 and60603-IEC-1540-3, respectively14562 6 January 2004 Implementation of IEC amend

4、ment 4:2002with CENELEC endorsement A4:200315675 February 2006 Implementation of IEC amendment 5:2005with CENELEC endorsement A5:200531 March 2010 Implementation of IEC amendment 6:2009with CENELEC modifi cations; alignment ofBSI and CEN publication dates30 June 2015 Implementation of IEC amendment

5、7:2014 withCENELEC modifications. Annex ZA updatedISBN 978 0 580 79543 5National forewordThis British Standard is the UK implementation of EN 60630:1998+A7:2015. It is derived from IEC 60630:1994, incorporating amendments 1:1997, 2:1998, 3:1999, 4:2002, 5:2005, 6:2009 and 7:2014. It supersedes BS EN

6、 60630:1998+A6:2009 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the amendment. For example, text altered by IEC amendment 1 is indicated in the text by !“.Where a common m

7、odification to an IEC amendment has been introduced, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC to IEC amendment 6 are indicated by ZThe CENELEC common modifications have been implemented at the appropriate places in the text, and are indi

8、cated by a sideline. The CENELEC common modifications have deleted from the text lamps with cap E17, E26 and E39, which has resulted in the removal of the following data sheets: 630-IEC-2010-1 to 630-IEC-3640-1, inclusive.The amendment by which each page of the European Standard was introduced is in

9、dicated by an extension to the shoulder heading at the top of the page (e.g. EN 60630:1998/A3:1999). Where no such extension appears, the page is part of the original European Standard.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, t

10、o Subcommittee CPL/34/1, Electric lamps.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a Br

11、itish Standard cannot confer immunity from legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60630:1998+A7ICS29.140.20Descriptors: Lighting equipment, incandescent lamps, dimensions,overall dimensions , maximum valuesEnglish versionsMaximum lamp outliners for incandescent lampsCENE

12、LECEuropean Committee for Electrotechnical StandardizationComitEuropen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for

13、 CENELEC members.(IEC 60630 + A1:1997 + A2:1998, modified + A3:1999 + A4:2002 + A5:2005)Encombrement maximal des lampes incandescence (CEI 60630:1994 + A1:1997 + A2:1998,modifie + A3:1999 + A4:2002 + A5:2005) Maximale Lampen-Hllkurven fr Glhlampen (IEC 60630:1994 + A1:1997 + A2:1998,modifiziert + A3

14、:1999 + A4:2002 + A5:2005) This European Standard was approved byCENELEC on 1998-10-01. CENELEC. members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this EuropeanStandardthe statusof a national standard without any alteration. Up-to-date lis

15、ts and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to anyCENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re

16、sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELECmembers are the national standards bodies of Austria, Belgium,Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany,Greece, Hungary, Iceland

17、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Slovakia,Slovenia, Spain, Sweden,Switzerland and United Kingdom. Ref. No. EN 60630:1998 EFebruary 2015Foreword The text of the International Standard IEC 60630:1994 and its amendments 1:1997 and 2:1998, pre

18、pared bySC 34A, L amps, ofIEC TC 34, Lamps and related equipment, togetherwith common modifications prepared by Reporting Secretariat SR 34A, was submit ted to the formalvote and was approved byCENELEC as EN 60630on 1998-10-01.The following dates were fixed:Foreword to amendment A 3Thetextofdocument

19、34A/861/FDIS,future amendment 3 toIEC 60630, preparedbySC 34A, Lamps, ofIEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote andwas approved by CENELEC asamendment A 3 to EN 60630:1998 on 1998-08 -01.The following dates were fixed:Axennes deisangt“ denamrotivea ”rap

20、 etr t fohe boyd of htts eanaddr.nI htsi stnadadr Annex ZA si nifomrvitae.ennAx AZ haseben eddaLENEC yb d.CElatest date by which the ENhas to be implemented atnational level by publication of an identical national standard or byendorsement (dop) 1999-10-01latest date by which the national standards

21、conflicting withthe EN have to be withdrawn(dow) 1999-10-01latest date by which the amendment has to beimplemented atnationallevel by publication of anidentical national standardor by endorsement (dop)2000 - 05-01latest date by which the national standards conflicting withthe amendment haveto bewith

22、drawn(dow) 2002 -08 -01Page 2eroFt drowo nemaemdnt 4AThe text fo doucemnt1/A43700DF/IS, fuuter emandmnet4to 606 CEI1:03499, preperad ybCS ,A43 aLo ,spmf T CEIC 43L ,aa spmnd erlaetd eqempiunt, saw submttiet do eht ELENEC-CEIC parallle ovet nadwas paprevod yb CENELCE asemandmnet t 4Ao NE 6061:03899 o

23、n002-3-3010.hTlof eloiwgn dates erew fixe:dAxennes deisangt“ denamrotivea ”rap etr t fohe boyd of htts eanaddr.nI htsi stnadadr Annex ZA si nifomrvitae.ennAx AZ haseben eddaLENEC yb d.CEltasead ttb ey ihwcht he emandmnet has ot ebimlptnemeed attanianolelvel yb puacilbtoin of andienacitn latnoias ltn

24、adadror yb endorsmeent (dop)0023- 1 2-10ltasead ttb ey ihwcht he anitnola tsanadrds fnoclitctiw gnihteh emandmnet haveot ebwhtidrwan(dow) 6002-3010Foreword to amendment A4The text of document34A/1007/FDIS, future amendment4to IEC 60630:1994, prepared bySC 34A, Lamps, of IEC TC 34, Lamps and related

25、equipment, was submitted to the IEC-CENELEC parallel vote andwas approved by CENELEC asamendment A4 to EN 60630:1998 on2003-03-01.The following dates were fixed:Annexes designated “normative” are part of the body of the standard.In this standard Annex ZA is informative.Annex ZA hasbeen added by CENE

26、LEC.latest date by which the amendment has to beimplemented atnationallevel by publication of anidentical national standardor by endorsement (dop)2003- 1 2-01latest date by which the national standards conflicting withthe amendment hav o bewithdrawn(dow) 2006-03-01Foreword to amendment A5The text of

27、 document 34A/1121/FDIS, future amendment 5 to IEC 60630:1994, prepared bySC 34A, Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A5 to EN 60630:1998 on 2005-04-01.The following dates were fixed:latest date by

28、which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-01-01latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2008-04-01Endorsement noticeThe text of amendment 5:200

29、5 to the International Standard IEC 60630:1994 was approved byCENELEC as an amendment to the European Standard without any modification.BS EN 60630:1998+A7:2015EN 60630:1998+A7:2015Page 3Foreword to amendment A6The text of document 34A/1298/CDV, future amendment 6 to IEC 60630:1994, prepared by SC 3

30、4A, Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote. Together with the common modifications in EN 60603:1998, it was approved by CENELEC as amendment A6 to EN 60630:1998 on 2009-09-01.The following dates were fixed:latest date by which the amendment h

31、as to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-06-01latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2012-09-01Endorsement noticeThe text of amendment 6:2009 to the Internationa

32、l Standard IEC 60630:1994 was approved by CENELEC as an amendment to the European Standard with agreed common modifications as given below.COMMON MODIFICATIONSDelete all references to lamps with E17, E26 and E39 caps._BS EN 60630:1998+A7:2015EN 60630:1998+A7:2015Foreword to amendment A7The text of d

33、ocument 34A/1759/FDIS, future IEC 60630:1994/A7, prepared by SC 34A “Lamps” of IEC/TC 34 “Lamps and related equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60630:1998/A7:2015.A draft amendment, which covers common modifica-tions to IEC 60630:1994/A7 (34A/1759/

34、FDIS), was prepared by CLC/TC 34A “Lamps” and approved by CENELEC.The following dates are fixed:latest date by which thedocument has to be implemented at nationallevel by publication of an identical national standardor by endorsement (dop) 2016-01-19latest date by which the national standardsconflic

35、ting with the document have to be withdrawn (dow) 2018-01-19Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.Clauses, subclauses, notes,

36、 tables, figures and annexes which are additional to those in IEC 60630:1998/A7:2014 are prefixed “Z”.Endorsement noticeThe text of the International Standard IEC 60630:1994/A7:2014 was approved by CENELEC as a European Standard with agreed common modifications.Page 4Annex ZA (normative) Normative r

37、eferences to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, th

38、e latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in

39、 this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60061-3 - Lamp caps and holders together with gauges for the control of inter

40、changeability and safety - Part 3: Gauges EN 60061-3 - IEC 60064 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements EN 60064 - IEC 60357 - Tungsten halogen lamps (non-vehicle) - Performance specifications EN 60357 - IEC 60432-1 - Incandescent lamp

41、s - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes EN 60432-1 - IEC 60432-2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes EN 60432-2 - IEC 60432-3 - Incandes

42、cent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) EN 60432-3 - IEC/TR 60887 - Glass bulb designation system for lamps - - IEC 61126 - Procedure for use in the preparation of maximum lamp outlines - - BS EN 60630:1998+A7:2015EN 60630:1998+A7:2015CONTENTSFOREWORD21 Gene

43、ral61.1 Scope61.2 Normative references .61.3 General.62 Lamp outline data sheets 72.1 Introduction.72.2 Listofspecific lamp types included in this standard.82.3 Lamp outline data sheetsPage 5BS EN 60630:1998+A7:2015IEC 60630:1994+A7:2015Page 6BS EN 60630:1998+A7:2015MAXIMUM LAMP OUTLINES FOR INCANDE

44、SCENT LAMPS 1 General 1.1 Scope This International Standard comprises maximum lamp outlines for incandescent lamps (including tungsten-halogen lamps). NOTE Where reference is made to the cap E27/27, the use of the cap E27/25 is also allowed. 1.2 Normative references The following documents, in whole

45、 or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60061-1, Lamp caps and holders toget

46、her with gauges for the control of interchangeability and safety Part 1: Lamp caps IEC 60061-3, Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges IEC 60064, Tungsten filament lamps for domestic and similar general lighting purposes Performance

47、 requirements IEC 60357, Tungsten halogen lamps (non-vehicle) Performance specifications IEC 60432-1, Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 60432-2, Incandescent lamps Safety specifications Part 2: Tungsten hal

48、ogen lamps for domestic and similar general lighting purposes IEC 60432-3, Incandescent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) IEC 60887, Glass bulb designation system for lamps IEC 61126, Procedure for use in the preparation of maximum lamp outlines 1.3 General Obs

49、ervance of these requirements in luminaire design will ensure mechanical acceptance of lamps complying with the standard in which such lamps are included. No account is taken of temperature requirements, which are listed separately in the relevant lamp specification. For other technologies capable of better tolerances than incandescent lamps, the limiting values of the maximum outline apply. IEC 60630:1994+A7:2015Page 7BS EN 60630:1998+A7:2015For full information on the procedure to establish maximum lamp outlin