EN 60695-1-30-2017 en Fire hazard testing - Part 1-30 Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines.pdf

1、Fire hazard testingPart 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines (IEC 60695-1-30:2017)BS EN 60695-1-30:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUR

2、OPENNE EUROPISCHE NORM EN 60695-1-30 May 2017 ICS 13.220.40; 29.020 Supersedes EN 60695-1-30:2008 English Version Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines (IEC 60695-1-30:2017) Essais rela

3、tifs aux risques du feu - Partie 1-30: Lignes directrices pour lvaluation des risques du feu des produits lectrotechniques - Processus dessais de prslection - Lignes directrices gnrales (IEC 60695-1-30:2017) Prfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der Brandgef

4、ahr von elektrotechnischen Erzeugnissen - Anwendung von Vorauswahlverfahren - Allgemeiner Leitfaden (IEC 60695-1-30:2017) This European Standard was approved by CENELEC on 2017-03-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv

5、ing this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three

6、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electr

7、otechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Roma

8、nia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000

9、 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60695-1-30:2017 E National forewordThis British Standard is the UK implementation of EN 60695-1-30:2017. It is identical to IEC 60695-1-30:2017. It supersedes BS EN 6069

10、5-1-30:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/89, Fire hazard testing.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary pr

11、ovisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 89869 3ICS 13.220.40; 29.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard w

12、as published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60695130:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60695-1-30 May 2017 ICS 13.220.40; 29.020 Super

13、sedes EN 60695-1-30:2008 English Version Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines (IEC 60695-1-30:2017) Essais relatifs aux risques du feu - Partie 1-30: Lignes directrices pour lvaluation

14、 des risques du feu des produits lectrotechniques - Processus dessais de prslection - Lignes directrices gnrales (IEC 60695-1-30:2017) Prfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen - Anwendung von Vorauswahlverfahr

15、en - Allgemeiner Leitfaden (IEC 60695-1-30:2017) This European Standard was approved by CENELEC on 2017-03-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

16、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang

17、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the

18、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t

19、he United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any

20、means reserved worldwide for CENELEC Members. Ref. No. EN 60695-1-30:2017 E BS EN 60695130:2017EN 60695-1-30:2017 2 European foreword The text of document 89/1350/FDIS, future edition 3 of IEC 60695-1-30, prepared by IEC/TC 89 “Fire hazard testing“ was submitted to the IEC-CENELEC parallel vote and

21、approved by CENELEC as EN 60695-1-30:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-28 latest date by which the national standards conflicting with the doc

22、ument have to be withdrawn (dow) 2020-03-28 This document supersedes EN 60695-1-30:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsem

23、ent notice The text of the International Standard IEC 60695-1-30:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60335-1:2010 NOTE Harmonized as EN 60335-1:201

24、2 (modified). IEC 60335-1:2010/A1:2013 NOTE Harmonized as EN 60335-1:2012/A1:201X 1)(modified). 1) At draft stage. BS EN 60695130:2017EN 60695-1-30:2017 2 European foreword The text of document 89/1350/FDIS, future edition 3 of IEC 60695-1-30, prepared by IEC/TC 89 “Fire hazard testing“ was submitte

25、d to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60695-1-30:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-28 latest date by which the nati

26、onal standards conflicting with the document have to be withdrawn (dow) 2020-03-28 This document supersedes EN 60695-1-30:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying

27、any or all such patent rights. Endorsement notice The text of the International Standard IEC 60695-1-30:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60335-1

28、:2010 NOTE Harmonized as EN 60335-1:2012 (modified). IEC 60335-1:2010/A1:2013 NOTE Harmonized as EN 60335-1:2012/A1:201X 1)(modified). 1) At draft stage. EN 60695-1-30:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The fo

29、llowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When a

30、n International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60695-1-

31、10 - Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines EN 60695-1-10 - IEC 60695-1-11 - Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment EN 60695-1-11

32、- IEC 60695-1-12 - Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering - - IEC 60695-4 2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products EN 60695-4 2012 IEC Guide 104 - The pre

33、paration of safety publications and the use of basic safety publications and group safety publications - - ISO/IEC Guide 51 - Safety aspects - Guidelines for their inclusion in standards - - ISO 13943 2008 Fire safety - Vocabulary EN ISO 13943 2010 BS EN 60695130:2017This page deliberately left blan

34、k 2 IEC 60695-1-30:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Principles of product design considering preselection 7 5 Advantages and limitations of preselection 8 6 Aspects of preselection relative to fire hazard assessment 9

35、 Annex A (informative) Examples of test methods . 10 A.1 General . 10 A.2 Ignitability . 10 A.3 Flammability and flame spread 10 A.4 Heat 11 A.5 Smoke 11 A.6 Toxicity . 11 A.7 Corrosion 11 A.8 Abnormal heat 11 A.9 Tracking index 11 Annex B (informative) Use of preselection tests for flammability req

36、uirements for materials used in attended electric appliances Illustrative example 12 Bibliography 14 Figure B.1 Selection and sequence of tests for resistance to fire in attended appliances in accordance with Figure O.3 of IEC 60335-1 1 13 Table 1 Some factors which can affect fire performance in pr

37、eselection tests 8 2 IEC 60695-1-30:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Principles of product design considering preselection 7 5 Advantages and limitations of preselection 8 6 Aspects of preselection relative to fire ha

38、zard assessment 9 Annex A (informative) Examples of test methods . 10 A.1 General . 10 A.2 Ignitability . 10 A.3 Flammability and flame spread 10 A.4 Heat 11 A.5 Smoke 11 A.6 Toxicity . 11 A.7 Corrosion 11 A.8 Abnormal heat 11 A.9 Tracking index 11 Annex B (informative) Use of preselection tests for

39、 flammability requirements for materials used in attended electric appliances Illustrative example 12 Bibliography 14 Figure B.1 Selection and sequence of tests for resistance to fire in attended appliances in accordance with Figure O.3 of IEC 60335-1 1 13 Table 1 Some factors which can affect fire

40、performance in preselection tests 8 BS EN 60695130:2017IEC 60695-1-30:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIRE HAZARD TESTING Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Preselection testing process General guidelines FOREWORD 1) The Interna

41、tional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electro

42、nic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees;

43、 any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Stand

44、ardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has re

45、presentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,

46、IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional pub

47、lications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some ar

48、eas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents inclu

49、ding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is