EN 60704-2-13-2011 en Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13 Particular requirements for range hoods.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances Test code for the determination of airborne acoustical noisePart 2-13: Particular requirements for range hoodsBS EN 60704-2-13:2011Nat

2、ional forewordThis British Standard is the UK implementation of EN 60704-2-13:2011. It is identical to IEC 60704-2-13:2011. It supersedes BS EN 60704-2-13:2000+A2:2008 which will be withdrawn on 3 March 2014.The UK participation in its preparation was entrusted to Technical Committee CPL/59, Perform

3、ance of household electrical appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580

4、 69283 3 ICS 17.140.20; 97.040.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITI

5、SH STANDARDBS EN 60704-2-13:2011EUROPEAN STANDARD EN 60704-2-13 NORME EUROPENNE EUROPISCHE NORM April 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix

6、 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60704-2-13:2011 E ICS 17.140.20; 97.040.20 Supersedes EN 60704-2-13:2000 + A1:2006 + A2:2008English version Household and similar electrical appliances -

7、Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods (IEC 60704-2-13:2011) Appareils lectrodomestiques et analogues - Code dessai pour la dtermination du bruit arien - Partie 2-13: Rgles particulires pour les hottes de cuisine (CEI 60704-2

8、-13:2011) Elektrische Gerte fr den Hausgebrauch und hnliche Zwecke - Prfvorschrift fr die Bestimmung der Luftschallemission - Teil 2-13: Besondere Anforderungen fr Dunstabzugshauben (IEC 60704-2-13:2011) This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to compl

9、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secr

10、etariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as

11、the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway,

12、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60704-2-13:2011EN 60704-2-13:2011 - 2 - Foreword The text of document 59K/219/FDIS, future edition 2 of IEC 60704-2-13, prepared by SC 59K, Ovens and microwave ovens, cooking ranges and similar a

13、ppliances, of IEC TC 59, Performance of household electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60704-2-13 on 2011-03-03. This European Standard supersedes EN 60704-2-13:2000 + A1:2006 + A2:2008. EN 60704-2-13:2011 cancels and replaces EN 607

14、04-2-13:2000 + A1:2006 + A2:2008 and constitutes an adaptation to the third edition of EN 60704-1 (2010). This Part 2-13 is intended to be used in conjunction with EN 60704-1:2010 (3rd edition) Household and similar electrical appliances Test code for the determination of airborne acoustical noise P

15、art 1: General requirements. NOTE When “Part 1” is mentioned in this standard, it refers to EN 60704-1. This Part 2-13 supplements or modifies the corresponding clauses in EN 60704-1, so as to establish the test code for range hoods. When a particular subclause of Part 1 is not mentioned in this Par

16、t 2-13, that subclause is applicable as far as reasonable. Where this standard states “addition“, “modification“ or “replacement“, the relevant requirements, test specifications or explanatory matter in Part 1 is to be adapted accordingly. Subclauses, tables and figures that are numbered starting fr

17、om 101 are additional to those in Part 1. Unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause. Additional annexes are lettered AA, BB, etc. Attention is drawn to the possibility that some of the elemen

18、ts of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard o

19、r by endorsement (dop) 2011-12-03 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-03-03 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60704-2-13:2011 was approved by CENELEC as a European Standa

20、rd without any modification. _ BS EN 60704-2-13:2011- 3 - EN 60704-2-13:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated ref

21、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Addition: Publication Y

22、ear Title EN/HD YearIEC 61591 + A1 + A2 1997 2005 2010 Household range hoods - Methods for measuring performance EN 61591 + A1 + A2 1997 2006 2011 ISO 7235 2003 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure l

23、oss EN ISO 7235 2009 BS EN 60704-2-13:2011 4 60704-2-13 IEC:2011(E) INTRODUCTION The measuring conditions specified in this Part 2-13 provide for sufficient accuracy in determining the noise emitted and comparing the results of measurements taken by different laboratories, whilst simulating as far a

24、s possible the practical use of household range hoods. It is recommended to consider the determination of noise levels as part of a comprehensive testing procedure covering many aspects of the properties and performance of household range hoods. Compared to the first edition (2000) of this Part 2-13

25、, the second edition doesnt contain the description of an appropriate test enclosure which has now been incorporated in Part 1. The scope of this Part 2-13 has been extended to range hoods with an external fan. Furthermore the values of standard deviations of sound power levels determined according

26、to this part are given. In case of unavailability of an acoustical environment which is specified in Clause 4 of ISO 3743-1, ISO 3743-2 and ISO 3744 alternatively the sound power of range hoods can be determined according to Annex AA using the sound intensity method specified in ISO 9614-1 and ISO 9

27、614-2. This method is not suitable if the source under test has significant noise over 4,0 kHz for octave band frequencies or 6,3 kHz for one-third octave band frequencies. Sound intensity method for the determination of sound power levels shall not be used for the purpose of verification. NOTE As s

28、tated in the introduction to IEC 60704-1, this test code is concerned with airborne noise only. BS EN 60704-2-13:201160704-2-13 IEC:2011(E) 5 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE Part 2-13: Particular requirements for range hoods 1

29、Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope 1.1.1 General Addition: These particular requirements apply to electrical range hoods for household and similar use intended for filtering the air of a room or for exhausting the air out of a room, including their acce

30、ssories and their component parts. It also applies to range hoods with an external fan which may be mounted inside or outside of the room where the range hood is located. 1.1.2 Types of noise Replacement: The methods specified in ISO 3743-1, ISO 3743-2 and ISO 3744 can be used for measuring noise em

31、itted by range hoods. 1.1.3 Size of source Replacement: The method specified in ISO 3744 is applicable to noise sources of any size. When applying ISO 3743-1 and ISO 3743-2, care should be taken that the maximum size of the range hood under test fulfils the requirements specified in 1.3 of ISO 3743-

32、1 and ISO 3743-2. 1.2 Object Addition: This standard describes the determination of the noise emission of household range hoods under normal operating conditions and at the highest fan speed setting for normal use. NOTE 101 If a boost position is incorporated, this is not taken into account (see 6.5

33、 of IEC 61591). NOTE 102 A boost position is a setting of a control for occasional use, which results in a higher temporary fan speed (see 6.5 of IEC 61591). Requirements for the declaration of noise emission values are not within the scope of this standard. NOTE 103 For determining and verifying no

34、ise emission values declared in product specifications, see IEC 60704-3. 1.3 Measurement uncertainty Replacement: BS EN 60704-2-13:2011 6 60704-2-13 IEC:2011(E) The estimated values of standard deviations of sound power levels, determined according to this standard, are as follows: Table 101 Standar

35、d deviations of sound power levels Standard deviation (dB) r(repeatability) R(reproducibility) 0,4 1,0 1.101 Standard deviation for declaration and verification For the purpose of determining and verifying declared noise emission values according to IEC 60704-3, the following values apply: Table 102

36、 Standard deviations for declaration and verification Standard deviation (dB) P(production) t(total) M(reference) 1,5 1,7 1,8 2,0 2,0 2 Normative references This clause of Part 1 is applicable with the following addition: Addition: IEC 61591:1997, Household range hoods Methods for measuring performa

37、nce Amendment 1 (2005)1Amendment 2 (2010) ISO 7235:2003, Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss 3 Terms and definitions This clause of Part 1 is applicable with the following addition: 3.101 range

38、 hood appliance installed over a hob and through which air is passed to remove contaminants from the room IEC 61591, definition 3.1 3.102 recirculation-air range hood range hood containing filters to remove contaminants, after which the cleaned air is discharged back into the room IEC 61591, definit

39、ion 3.2 1There exists a consolidated edition 1.1 of IEC 61591 (2005), that includes IEC 61591 (1997) and its amendment 1 (2005). BS EN 60704-2-13:201160704-2-13 IEC:2011(E) 7 3.103 air-extracting range hood range hood which discharges the collected air to the outside of the building by means of duct

40、ing. The range hood can incorporate an internal or external fan. 4 Measurement methods and acoustical environments This clause of Part 1 is applicable except as follows: 4.2 Direct method Addition: NOTE 101 If pure tone components are present in the noise emitted by the source, the estimated standar

41、d deviation of the measured sound pressure levels in the special reverberation room may increase. In such cases additional microphone positions or source positions may be necessary as specified in ISO 3743-2. 4.3 Comparison method Addition: NOTE 101 If pure tone components are present in the noise e

42、mitted by the source, the estimated standard deviation of the measured sound pressure levels in the hard-walled test room or in the special reverberation room may increase. In such cases additional microphone positions or source positions may be necessary as specified in ISO 3743-1 or ISO 3743-2. 5

43、Instrumentation This clause of Part 1 is applicable except as follows: 5.1 Instrumentation for measuring acoustical data Addition: Windscreens should be used if necessary and then corrections for change in the microphone sensitivity shall be added to the observed sound pressure levels. 6 Operation a

44、nd location of appliance under test This clause of Part 1 is applicable except as follows: 6.1 Equipping and pre-conditioning of appliance 6.1.1 Addition: Recirculation-air range hoods should be fitted with a clean filter(s). Air-extraction range hoods shall be fitted with the pipe coupling ring, if

45、 any, having the largest diameter among those provided by the manufacturer. If the range hood is designed to accommodate additional filters, those filters shall be clean and appropriately fitted. 6.1.3 Replacement: BS EN 60704-2-13:2011 8 60704-2-13 IEC:2011(E) Prior to noise measurements, the range

46、 hood shall have been in operation for running in for at least 4 h at the highest speed setting for normal use (see notes in 1.2). 6.1.4 Replacement: Immediately before each series of noise measurements, the range hood equipped for its intended use is operated for stabilizing at the highest speed se

47、tting for normal use (see notes in 1.2) for 10 min. 6.2 Supply of electrical energy and of water or gas 6.2.3 and 6.2.4 Not aplicable 6.4 Loading and operating of appliance during test 6.4.2 Replacement: The appliances shall be equipped according to 6.1.1. The range hood shall be operated at the hig

48、hest speed setting for normal use (see notes in 1.2). Air-extraction range hoods shall be loaded using a pipe connected to a muffler according to Figure 101. The pipe shall be rigid with smooth inner walls and shall have the widest diameter among those specified by the manufacturer. If not stated, a

49、 standard pipe with the best fitting diameter shall be used. The muffler shall have an insertion loss as specified in the table of Figure 101. It shall have a circular section with the same internal diameter as that of the pipe, a length as specified in Figure 101 and shall not have parts protruding inside that may cause additional pressure drops. The pipe and the muffler shall also comply with all the specifications reported in Figure 101 and care shall be taken th