EN 60704-2-6-2012 en Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6 Particular requirements for tumble dryers.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances Test code for the determination of airborne acoustical noisePart 2-6: Particular requirements for tumble dryersBS EN 60704-2-6:2012Nat

2、ional forewordThis British Standard is the UK implementation of EN 60704-2-6:2012. It is identical to IEC 60704-2-6:2012. It supersedes BS EN 60704-2-6:2004 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee CPL/59, Performance of household electrical app

3、liances, to Subcommittee CPL/59/1, Dishwashers and washing machines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applica

4、tion. The British Standards Institution 2013.Published by BSI Standards Limited 2013 ISBN 978 0 580 75015 1 ICS 17.140.20; 97.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strat

5、egy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 60704-2-6:2012EUROPEAN STANDARD EN 60704-2-6 NORME EUROPENNE EUROPISCHE NORM October 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electro

6、technique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60704-2-6:2012 E ICS 17.140.20; 97.060 Supersedes EN 60704-2-6:

7、2004English version Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2012) Appareils lectrodomestiques et analogues - Code dessai pour la dtermination du bruit arien - Parti

8、e 2-6: Rgles particulires pour les sche-linge tambour (CEI 60704-2-6:2012) Elektrische Gerte fr den Hausgebrauch und hnliche Zwecke - Prfvorschrift fr die Bestimmung der Luftschallemission - Teil 2-6: Besondere Anforderungen fr Wschetrockner (IEC 60704-2-6:2012) This European Standard was approved b

9、y CENELEC on 2012-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national s

10、tandards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan

11、guage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra

12、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60704-2-6:2012EN 60704-2-6:2012 - 2 - Foreword The text of document 5

13、9D/394/FDIS, future edition 3 of IEC 60704-2-6, prepared by SC 59D, “Home laundry appliances“ of IEC/TC 59 “Performance of household electrical appliances“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60704-2-6:2012. The following dates are fixed: latest date by which

14、 the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-04-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-05-01 This document supersedes EN 60704-2-6:2004. EN 607

15、04-2-6:2012 includes the following significant technical changes with respect to EN 60704-2-6:2004: - it does not contain the description of an appropriate test enclosure which has been incorporated in Part 1; - it clarifies that the only appliances designed for front loading and specified by the ma

16、nufacturer for building-in, under a counter or placing under a worktop between cabinets (under-counter types) shall be placed in a test enclosure. This standard is to be used in conjunction with EN 60704-1:2010. NOTE When “Part 1” is mentioned in this standard, it refers to EN 60704-1. This Part 2-6

17、 supplements or modifies the corresponding clauses in EN 60704-1, so as to establish the test code for tumble dryers. When a particular subclause of Part 1 is not mentioned in this Part 2-6, that subclause is applicable as far as reasonable. Where this standard states “addition“, “modification“ or “

18、replacement“, the relevant requirements, test specifications or explanatory matter in Part 1 should be adapted accordingly. Subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1. Additional annexes are lettered AA, BB, etc. Unless notes are in a new sub

19、clause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identi

20、fying any or all such patent rights. For the relationship with Commission Regulation (EC) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60704-2-6:2012 was approved by CENELEC as a European Standard without any modi

21、fication. BS EN 60704-2-6:2012- 3 - EN 60704-2-6:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications Addition to Annex ZA of EN 60704-1:2010. Publication Year Title EN/HD Year IEC 60456 (mod) + corr. September 2010 2011 Clothes

22、washing machines for household use - Methods for measuring the performance EN 60456 + AC:2011 2011 2011 IEC 61121 - Tumble dryers for household use - Methods for measuring the performance EN 61121 - ISO 7235 - Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units

23、- Insertion loss, flow noise and total pressure loss EN ISO 7235 - BS EN 60704-2-6:2012EN 60704-2-6:2012 - 4 - Annex ZZ (informative) Coverage of Requirements of Commission Delegated Regulation (EC) No 392/2012 supplementing Directive 2010/30/EU This European Standard has been prepared under a manda

24、te given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers only requirements concerning airborne acoustical noise emissions out of those requirements given in Commission Regulation (EC) No 392/ 2012. Compliance with this standard p

25、rovides one means of conformity with the specified requirements of the Commission Regulation(s) concerned. WARNING: Other requirements and other EC Directives or Commission Regulations may be applicable to the products falling within the scope of this standard. BS EN 60704-2-6:2012 2 60704-2-6 IEC:2

26、012 CONTENTS INTRODUCTION . 5 1 Scope and object 6 1.1 Scope 6 1.2 Object . 6 1.3 Measurement uncertainty 6 2 Normative references . 7 3 Terms and definitions . 7 4 Measurement methods and acoustical environments 8 4.2 Direct method 8 4.3 Comparison method 8 5 Instrumentation 8 6 Operation and locat

27、ion of appliances under test . 8 6.1 Equipping and pre-conditioning of appliances . 8 6.2 Supply of electric energy and of water or gas . 9 6.3 Climatic conditions . 9 6.4 Loading and operating of appliances during tests . 9 6.5 Location and mounting of appliances 10 6.101 Standard test programme fo

28、r noise measurements . 10 6.102 Standard test load for noise measurements 11 7 Measurement of sound pressure levels . 12 7.1 Microphone array, measurement surface and RSS location for essentially free-field conditions over reflecting plane(s) 12 7.4 Measurements . 12 8 Calculation of sound pressure

29、and sound power levels . 13 9 Information to be recorded 13 9.6 Equipment and pre-conditioning of appliance under test 13 9.7 Electric supply, water supply, etc. . 13 10 Information to be reported 13 Annexes . 15 Annex A (normative) Standard test table 15 Figure 101 Standard Exhaust . 14 Table 101 S

30、tandard deviations of sound power levels 7 Table 102 Standard deviations for declaration and verification . 7 BS EN 60704-2-6:201260704-2-6 IEC:2012 5 INTRODUCTION The measuring conditions specified in this part of IEC 60704 provide for sufficient accuracy in determining the noise emitted and compar

31、ing the results of measurements taken by different laboratories, whilst simulating as far as possible the practical use of tumble dryers. It is recommended to consider the determination of noise levels as part of a comprehensive testing procedure covering many aspects of properties and performance o

32、f household tumble dryers. NOTE As stated in the introduction to IEC 60704-1, this test code concerns airborne noise only. BS EN 60704-2-6:2012 6 60704-2-6 IEC:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE Part 2-6: Particular requireme

33、nts for tumble dryers 1 Scope and object This clause of Part 1 is applicable except as follows. 1.1 Scope 1.1.1 General Addition: These particular requirements apply to single unit electric tumble dryers for household and similar use intended for placing on the floor against a wall, for building-in

34、or placing under a counter, a kitchen worktop or under a sink, for wall-mounting or on a counter. For the purpose of this standard, washer-dryer combinations, when operated as a dryer, are considered as a tumble dryer. NOTE 101 For washing function, see IEC 60704-2-4. This standard is also applicabl

35、e for gas-fired electric tumble dryers. 1.1.2 Types of noise Replacement: The methods specified in ISO 3743-1, ISO 3743-2 and ISO 3744 can be used for measuring noise emitted by tumble dryers. 1.1.3 Size of the source Replacement: The method specified in ISO 3744 is applicable to noise sources of an

36、y size. When applying ISO 3743-1 and ISO 3743-2, care should be taken that the maximum size of the appliance under test fulfils the requirements specified in 1.3 of ISO 3743-1 and ISO 3743-2. 1.2 Object Addition: Requirements for the declaration of noise emission values are not within the scope of t

37、his standard. NOTE 101 For determining and verifying noise emission values declared in product specifications, see IEC 60704-3. 1.3 Measurement uncertainty Replacement: BS EN 60704-2-6:201260704-2-6 IEC:2012 7 The estimated values of standard deviations of sound power levels, determined according to

38、 this standard, are: Table 101 Standard deviations of sound power levels Standard deviation dB r(repeatability) R(reproducibility) 0,4 0,8 Addition: 1.101 Standard deviation for declaration and verification For the purpose of determining and verifying declared noise emission values according to IEC

39、60704-3, the values indicated in Table 102 apply: Table 102 Standard deviations for declaration and verification Standard deviation dB P(production) t(total) M(reference) 0,7 to 1,0 1,1 to 1,3 1,5 2 Normative references This clause of Part 1 is applicable except as follows: Addition: IEC 61121: 1, T

40、umble dryers for household use Methods for measuring the performance IEC 60456:2010, Clothes washing machines for household use Methods for measuring the performance ISO 7235, Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total

41、 pressure loss 3 Terms and definitions This clause of Part 1 is applicable except as follows. Addition: 3.101 tumble dryer appliance in which textile material is dried by tumbling in a rotating drum, through which heated air is passed _ 1To be published. BS EN 60704-2-6:2012 8 60704-2-6 IEC:2012 3.1

42、02 rated capacity maximum mass in kg of dry textiles of a particular defined type, which the manufacturer declares can be treated in the tumble dryer on the programme selected. If the rated capacity is not declared, it shall be deduced from the free inside volume of the drum, according to the ratio

43、1 kg / 24 l Note 1 to entry: The rated capacity should be the same as the one used for measuring the drying performance and energy consumption according to IEC 61121. 3.103 cotton test load textile load consisting of towels only, as defined in Annex B of IEC 61121: . 4 Measurement methods and acoust

44、ical environments This clause of Part 1 is applicable except as follows: 4.2 Direct method Addition: NOTE 101 If pure tone components are present in the noise emitted by the source, the estimated standard deviation of the measured sound pressure levels in the special reverberation room may increase.

45、 In such cases additional microphone positions or source positions may be necessary, as specified in ISO 3743-2. 4.3 Comparison method Addition: NOTE 101 If pure tone components are present in the noise emitted by the source, the estimated standard deviation of the measured sound pressure levels in

46、the hard-walled test room or in the special reverberation room may increase. In such cases additional microphone positions or source positions may be necessary as specified in ISO 3743-1 or ISO 3743-2. 5 Instrumentation This clause of Part 1 is applicable. 6 Operation and location of appliances unde

47、r test This clause of Part 1 is applicable except as follows: 6.1 Equipping and pre-conditioning of appliances 6.1.1 Addition: Prior to noise measurement, filters if any, shall be cleaned according to the manufacturers instructions. If, according to the manufacturers instructions, the tumble dryer c

48、an be connected to an exhaust device, the standard exhaust as described in Figure 101 shall be connected. It consists of a pipe connected to a muffler. The pipe shall be rigid with smooth inner walls and shall have the widest diameter among those specified by the manufacturer. If not stated, a stand

49、ard pipe with the best fitting diameter shall be used. The muffler shall have an insertion loss as specified in the table of Figure 101. It shall have a circular section with the same inner diameter as that of the pipe, a length as specified in Figure 101 and shall not have parts BS EN 60704-2-6:201260704-2-6 IEC:2012 9 protruding inside that may cause additional pressure drops. The pipe and the muffler shall also comply with all the specifications reported in Figure 101 and ca