EN 60763-3-1-2011 en Laminated pressboard for electrical purposes - Part 3 Specifications for individual materials - Sheet 1 Requirements for laminated precompressed pressboard Typ.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationLaminated pressboard for electrical purposesPart 3: Specifications for individual materials Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.

2、1A.2BS EN 60763-3-1:2011National forewordThis British Standard is the UK implementation of EN 60763-3-1:2011. It isidentical to IEC 60763-3-1:2010. It supersedes BS EN 60763-3-1:1996, whichwill be withdrawn on 2 January 2014.The UK participation in its preparation was entrusted by Technical Committe

3、eGEL/15, Solid electrical insulating materials, to Subcommittee GEL/15/9,Cellulosic materials.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible

4、 for its correct application. BSI 2011ISBN 978 0 580 63400 0ICS 29.035.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 June 2011.Amendments issued since publi

5、cationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60763-3-1:2011EUROPEAN STANDARD EN 60763-3-1 NORME EUROPENNE EUROPISCHE NORM February 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N

6、ormung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60763-3-1:2011 E ICS 29.035.10 Supersedes EN 60763-3-1:1996English version Laminated pressboard for electrical purp

7、oses - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010) Cartons comprims et contrecolls usages lectriques - Partie 3: Spcifications pour matriaux particuliers - Feuille 1: Exigences relat

8、ives aux cartons prcomprims contrecolls, Types LB 3.1A.1 et 3.1A.2 (CEI 60763-3-1:2010) Blockspan fr elektrotechnische Anwendungen - Teil 3: Bestimmungen fr einzelne Werkstoffe - Blatt 1: Anforderungen fr heigepressten Blockspan, Typen LB 3.1A.1 und LB 3.1A.2 (IEC 60763-3-1:2010) This European Stand

9、ard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni

10、ng such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its

11、 own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, I

12、reland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60763-3-1:2011EN 60763-3-1:2011 - 2 - Foreword The text of document 15/537/CDV, future edition 2 of IEC 60763-3-1, pre

13、pared by IEC TC 15, Solid electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60763-3-1 on 2011-01-02. This European Standard supersedes EN 60763-3-1:1996. The main changes with respect to EN 60763-3-1:1996 are listed below: requirements

14、for the new properties in Part 2 have been integrated; specifications for type LB3.3.1 and LB3.3.2 have been deleted. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying an

15、y or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-10-02 latest date by which the national standards conflicting with the EN have to be withdraw

16、n (dow) 2014-01-02 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60763-3-1:2010 was approved by CENELEC as a European Standard without any modification. _ BS EN 60763-3-1:2011- 3 - EN 60763-3-1:2011 Annex ZA (normative) Normative references to in

17、ternational publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an

18、y amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60763-1 2010 Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general r

19、equirements EN 60763-1 2011 IEC 60763-2 2007 Specification for laminated pressboard - Part 2: Methods of test EN 60763-2 2007 BS EN 60763-3-1:2011 4 60763-3-1 IEC:2010 LAMINATED PRESSBOARD FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 1: Requirements for laminated pre

20、compressed pressboard, Types LB3.1A.1 and LB3.1A.2 1 Scope This sheet of IEC 60763-3 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. Materials which conform to this specification meet established levels of performance. However, the selection of a mate

21、rial by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For

22、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60763-1:2010, Laminated pressboard for electrical purposes Part 1: Definitions, classification and general requirements IEC 60763-2:2007, S

23、pecification for laminated pressboard Part 2: Methods of test 3 Designation LB3.1A.1 laminated precompressed board made from 100 % sulphate wood pulp, bonded with a casein-type glue. LB3.1A.2 laminated precompressed board made from 100 % sulphate wood pulp, bonded with a non-aqueous resin. 4 General

24、 requirements Materials shall conform to the general requirements given in IEC 60763-1 and to the specific requirements of the appropriate type given in Table 1 of this sheet when tested according to the methods stipulated in IEC 60763-2. BS EN 60763-3-1:201160763-3-1 IEC:2010 5 Table1Specificrequir

25、ementswithregard to theappropriatetypeof board LB3.1A.1LB3.1A.2Bonding agentCasein Non-aqueous PropertyTestmethod (clause or subclause ofIEC 60763-2) UnitMax. or Min. Thickness deviation12 mrn 12mm5.1 % % Max.Max.5 4 5 4 Flatness500 mm50 mm5.1.4 mmMax.5 3 2 4 2 1 Flexuralstrength MDCMD 6.1 MPaMPaMin

26、.Min.100 80 110 90 Compressibility: C Crev7.1 % % Max.Min.3.5 65 3 70 Electricstrength in oilParalleltolayers8 kV/mmMin.8 8 Internalply strength Dried,tested at23 CDried,tested at120 C,retention Oilimpregnated,tested at23 C,retention Aged for 1 weekat120 Cin oil,tested at23 Cretention 9 MPa% % % Min

27、.Min.Min.Min.80 60 80 90 90 60 80 90 Apparentdensity 10 g/cm3Range 1,15 1,3 1,15 1,35 Moisture content11 %Max.8 5 Shrinkage:MDCMD Thickness 12 % % % Max.Max.Max.0,5 0,7 6 0,4 0,6 4 Oilabsorption 13 %Min.6 5 Ash content14 %To be agreed between supplierand purchaser Contamination ofdielectricliquidsNe

28、utralisation value Sludge contentDissipation factor 15 mgKOH/gmg/lMax.0,08 500 0,005 0,05 500 0,005 Conductivityofaqueousextract16 mS/mMax.15 10 pH ofaqueousextract17 Range 6 - 10 5 - 8 _ BS EN 60763-3-1:2011This page deliberately left blankThis page deliberately left blankBSI is the independent nat

29、ional body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideB

30、SI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality

31、 of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8

32、996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredi

33、t card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI

34、 implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Var

35、ious BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof sta

36、ndards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at

37、 www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in an

38、yform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: