EN 60793-1-1-2017 en Optical fibres - Part 1-1 Measurement methods and test procedures - General and guidance.pdf

1、Optical fibresPart 1-1: Measurement methods and test procedures General and guidanceBS EN 60793-1-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-1-1 April 2017 ICS 33.180.10 Supersedes EN 60793-1-1:200

2、8 English Version Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance (IEC 60793-1-1:2017) Fibres optiques - Partie 1-1: Mthodes de mesure et procdures dessai - Gnralits et lignes directrices (IEC 60793-1-1:2017) Lichtwellenleiter - Teil 1-1: Messmethoden und Pr

3、fverfahren - Allgemeines und Leitfaden (IEC 60793-1-1:2017) This European Standard was approved by CENELEC on 2017-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w

4、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any

5、 other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,

6、Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, T

7、urkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form

8、and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-1-1:2017 E National forewordThis British Standard is the UK implementation of EN 60793-1-1:2017. It is identical to IEC 60793-1-1:2017. It supersedes BS EN 60793-1-1:2008, which is withdrawn.The UK participation in its prepar

9、ation was entrusted to Technical Committee GEL/86/1, Optical fibres and cables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corr

10、ect application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92692 1ICS 33.180.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strat

11、egy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6079311:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-1-1 April 2017 ICS 33.180.10 Supersedes EN 60793-1-1:2008 English Version Optical fibres - Part 1-1: Measure

12、ment methods and test procedures - General and guidance (IEC 60793-1-1:2017) Fibres optiques - Partie 1-1: Mthodes de mesure et procdures dessai - Gnralits et lignes directrices (IEC 60793-1-1:2017) Lichtwellenleiter - Teil 1-1: Messmethoden und Prfverfahren - Allgemeines und Leitfaden (IEC 60793-1-

13、1:2017) This European Standard was approved by CENELEC on 2017-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogr

14、aphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon

15、sibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finlan

16、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for

17、 Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Memb

18、ers. Ref. No. EN 60793-1-1:2017 E BS EN 6079311:2017EN 60793-1-1:2017 2 European foreword The text of document 86A/1747/CDV, future edition 4 of IEC 60793-1-1, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

19、 EN 60793-1-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-01 latest date by which the national standards conflicting with the document have to be withdr

20、awn (dow) 2020-03-01 This document supersedes EN 60793-1-1:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice Th

21、e text of the International Standard IEC 60793-1-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated IEC 60793-2 (Series) NOTE Harmonized as EN 60793-2 (Series). IS

22、O 80000-1:2009 NOTE Harmonized as EN ISO 80000-1:2013. BS EN 6079311:2017EN 60793-1-1:2017 2 European foreword The text of document 86A/1747/CDV, future edition 4 of IEC 60793-1-1, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and a

23、pproved by CENELEC as EN 60793-1-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-01 latest date by which the national standards conflicting with the docum

24、ent have to be withdrawn (dow) 2020-03-01 This document supersedes EN 60793-1-1:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.

25、Endorsement notice The text of the International Standard IEC 60793-1-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated IEC 60793-2 (Series) NOTE Harmonized as EN

26、 60793-2 (Series). ISO 80000-1:2009 NOTE Harmonized as EN ISO 80000-1:2013. EN 60793-1-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this docu

27、ment and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicate

28、d by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-1-20 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibr

29、e geometry EN 60793-1-20 - IEC 60793-1-21 - Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 - IEC 60793-1-22 - Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement EN 60793-1-22 - IEC 60793-1-30 - Optical fibres

30、 - Part 1-30: Measurement methods and test procedures - Fibre proof test EN 60793-1-30 - IEC 60793-1-31 - Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength EN 60793-1-31 - IEC 60793-1-32 - Optical fibres - Part 1-32: Measurement methods and test procedures - Coat

31、ing strippability EN 60793-1-32 - IEC 60793-1-33 - Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility EN 60793-1-33 - IEC 60793-1-34 - Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl EN 60793-1-34 - IEC 60793-1-40 -

32、Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-1-41 - Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth EN 60793-1-41 - IEC 60793-1-42 - Optical fibres - Part 1-42: Measurement methods and test procedures - Ch

33、romatic dispersion EN 60793-1-42 - IEC 60793-1-43 - Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement EN 60793-1-43 - IEC 60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 - IEC 60793

34、-1-45 - Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter EN 60793-1-45 - BS EN 6079311:2017EN 60793-1-1:2017 4 IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance EN 60793-1-46

35、- IEC 60793-1-47 - Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss EN 60793-1-47 - IEC 60793-1-48 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion EN 60793-1-48 - IEC 60793-1-49 - Optical fibres - Part 1-49:

36、Measurement methods and test procedures - Differential mode delay EN 60793-1-49 - IEC 60793-1-50 - Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests EN 60793-1-50 - IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement methods and test procedures

37、 - Dry heat (steady state) tests EN 60793-1-51 - IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests EN 60793-1-52 - IEC 60793-1-53 - Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests EN 60793-1-

38、53 - IEC 60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation EN 60793-1-54 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC/TR 61931 - Fibre optic - Terminology - - 2 IEC 60793-1-1:2017 IEC 2017 CONTENTS FOREW

39、ORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Rounding rules 7 5 Measurement and test categories 8 6 Standard atmospheric measurement and test conditions . 9 7 Calibration guidance 9 8 Reference test methods . 9 9 Categories of optical fibres 9 10 Packaging

40、. 9 Bibliography 11 Table 1 Standard range of atmospheric conditions . 9 BS EN 6079311:2017EN 60793-1-1:2017 4 IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance EN 60793-1-46 - IEC 60793-1-47 - Optical fibres - Part

41、1-47: Measurement methods and test procedures - Macrobending loss EN 60793-1-47 - IEC 60793-1-48 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion EN 60793-1-48 - IEC 60793-1-49 - Optical fibres - Part 1-49: Measurement methods and test procedures -

42、 Differential mode delay EN 60793-1-49 - IEC 60793-1-50 - Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests EN 60793-1-50 - IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests EN 60793

43、-1-51 - IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests EN 60793-1-52 - IEC 60793-1-53 - Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests EN 60793-1-53 - IEC 60793-1-54 - Optical fibres - Pa

44、rt 1-54: Measurement methods and test procedures - Gamma irradiation EN 60793-1-54 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC/TR 61931 - Fibre optic - Terminology - - 2 IEC 60793-1-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Norm

45、ative references 6 3 Terms and definitions 7 4 Rounding rules 7 5 Measurement and test categories 8 6 Standard atmospheric measurement and test conditions . 9 7 Calibration guidance 9 8 Reference test methods . 9 9 Categories of optical fibres 9 10 Packaging . 9 Bibliography 11 Table 1 Standard rang

46、e of atmospheric conditions . 9 BS EN 6079311:2017IEC 60793-1-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-1: Measurement methods and test procedures General and guidance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organizatio

47、n for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC pu

48、blishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with ma

49、y participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex