EN 60793-1-61-2017 en Optical fibres - Part 1-61 Measurement methods and test procedures - Polarization crosstalk.pdf

1、Optical fibresPart 1-61: Measurement methods and test procedures Polarization crosstalk (IEC 60793-1-61:2017)BS EN 60793-1-61:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-1-61 May 2017 ICS 33.180.10 En

2、glish Version Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk (IEC 60793-1-61:2017) Fibres optiques - Partie 1-61: Mthodes de mesure et procdures dessai - Diaphonie de polarisation (IEC 60793-1-61:2017) Lichtwellenleiter - Teil 1-61: Messmethoden und Prfv

3、erfahren - Polarisationsbersprechen (IEC 60793-1-61:2017) This European Standard was approved by CENELEC on 2017-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit

4、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any o

5、ther language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cy

6、prus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

7、key and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form an

8、d by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-1-61:2017 E National forewordThis British Standard is the UK implementation of EN 60793-1-61:2017. It is identical to IEC 60793-1-61:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/86/1, Op

9、tical fibres and cables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017

10、 Published by BSI Standards Limited 2017ISBN 978 0 580 93519 0ICS 33.180.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigend

11、a issued since publicationDate Text affectedBRITISH STANDARDBS EN 60793161:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-1-61 May 2017 ICS 33.180.10 English Version Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk (IEC 60793-1-61:2017) Fib

12、res optiques - Partie 1-61: Mthodes de mesure et procdures dessai - Diaphonie de polarisation (IEC 60793-1-61:2017) Lichtwellenleiter - Teil 1-61: Messmethoden und Prfverfahren - Polarisationsbersprechen (IEC 60793-1-61:2017) This European Standard was approved by CENELEC on 2017-03-14. CENELEC memb

13、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

14、on to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC

15、 Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan

16、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

17、Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-1-61:2017 E BS EN 60793161:2017EN 60793-1-61:2017 2 Europea

18、n foreword The text of document 86A/1739/CDV, future edition 1 of IEC 60793-1-61, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60793-1-61:2017. The following dates are fixed: latest date by which the d

19、ocument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-14 Attention is drawn to the possibility that some of the e

20、lements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60793-1-61:2017 was approved by CENELEC as a European Standard without any modification. BS

21、 EN 60793161:2017EN 60793-1-61:2017 2 European foreword The text of document 86A/1739/CDV, future edition 1 of IEC 60793-1-61, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60793-1-61:2017. The followin

22、g dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-12-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-14 Attention i

23、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60793-1-61:2017 was approved by CENELEC as a E

24、uropean Standard without any modification. EN 60793-1-61:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for i

25、ts application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD a

26、pplies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-1-1 - Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance EN 60793-1-1 - IE

27、C 60793-2-70 - Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres EN 60793-2-70 - IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - BS EN 60793161:2017This page deliberately left blank 2 IEC 60793-1-61:2017 I

28、EC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Test conditions 5 5 Reference test method 6 6 Test methods . 6 6.1 Method A: Power ratio method 6 6.1.1 Overview of the method . 6 6.1.2 Application . 6 6.1.3 Test apparatus 6 6.1.4 Test procedure 7 6.2 Meth

29、od B: In-line polarimetric method . 8 6.2.1 General . 8 6.2.2 Limitations of the method . 8 6.2.3 Measurement process . 8 6.2.4 Mathematical basis 9 7 Results 10 7.1 Information available with each measurement . 10 7.2 Information available upon request . 10 Figure 1 Example of test apparatus for po

30、larization crosstalk measurement (power ratio method) 6 Figure 2 Poincar sphere representations for Method B . 9 2 IEC 60793-1-61:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Test conditions 5 5 Reference test method 6 6 Test methods . 6 6.1 Meth

31、od A: Power ratio method 6 6.1.1 Overview of the method . 6 6.1.2 Application . 6 6.1.3 Test apparatus 6 6.1.4 Test procedure 7 6.2 Method B: In-line polarimetric method . 8 6.2.1 General . 8 6.2.2 Limitations of the method . 8 6.2.3 Measurement process . 8 6.2.4 Mathematical basis 9 7 Results 10 7.

32、1 Information available with each measurement . 10 7.2 Information available upon request . 10 Figure 1 Example of test apparatus for polarization crosstalk measurement (power ratio method) 6 Figure 2 Poincar sphere representations for Method B . 9 BS EN 60793161:2017IEC 60793-1-61:2017 IEC 2017 3 I

33、NTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-61: Measurement methods and test procedures Polarization crosstalk FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC

34、 National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

35、Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-go

36、vernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IE

37、C on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are acce

38、pted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote internatio

39、nal uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the la

40、tter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users sho

41、uld ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other dam

42、age of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of

43、 the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent righ

44、ts. International Standard IEC 60793-1-61 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. The text of this International Standard is based on the following documents: CDV Report on voting 86A/1739/CDV 86A/1781/RVC Full information on the voting

45、for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60793 series, published under the general title Optical fibres, can be f

46、ound on the IEC website. BS EN 60793161:2017IEC 60793-1-61:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-61: Measurement methods and test procedures Polarization crosstalk FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization

47、for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publ

48、ishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

49、participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the r