EN 60793-2-2016 en Optical fibres - Part 2 Product specifications - General.pdf

1、Optical fibresPart 2: Product specifications GeneralBS EN 60793-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60793-2:2016. It isidentical to IEC 60793-2:2015. It supersedes BS EN 60793-2:2

2、012 whichis withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibres and cables.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purpo

3、rt to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87469 7ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations

4、.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016. Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60793-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-2 June 2016 ICS 33.180.

5、10 Supersedes EN 60793-2:2012 English Version Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2015) Fibres optiques - Partie 2: Spcifications de produits - Gnralits (IEC 60793-2:2015) Lichtwellenleiter - Teil 2: Produktspezifikationen - Allgemeines (IEC 60793-2:2015) This Euro

6、pean Standard was approved by CENELEC on 2015-12-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

7、s concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

8、ELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugosla

9、v Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standar

10、dization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-2:

11、2016 E BS EN 60793-2:2016EN 60793-2:2016 2 European foreword The text of document 86A/1645/CDV, future edition 8 of IEC 60793-2, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60793-2:2016. The following

12、 dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-12-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-06-17 This documen

13、t supersedes EN 60793-2:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standar

14、d IEC 60793-2:2015 was approved by CENELEC as a European Standard without any modification. BS EN 60793-2:2016EN 60793-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are nor

15、matively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified b

16、y common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60304 - Standard colours for insulation for low-frequen

17、cy cables and wires HD 402 S2 - IEC 60793-1 series Optical fibres EN 60793-1 series IEC 60793-2-10 - EN 60793-2-10 - IEC 60793-2-20 - EN 60793-2-20 - IEC 60793-2-30 - EN 60793-2-30 - IEC 60793-2-40 - Optical fibres - Part 40: Product specifications - Sectional specification for category A4 multimode

18、 fibres EN 60793-2-40 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60793-2-60 - Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnectio

19、n fibres EN 60793-2-60 - BS EN 60793-2:2016 2 IEC 60793-2:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 6 3 Terms and definitions 6 4 Quality assurance 7 5 Construction of optical fibres . 7 5.1 Class A Multimode fibres . 7 5.2 Class B Single-mode fibres 9 5.3 Class C Single-m

20、ode fibres for intraconnection 10 6 General requirements 10 6.1 Coating . 10 6.2 Interface with the coating 11 6.3 Colours of the coating . 11 Annex A (normative) Existing multimode fibres 12 Annex B (normative) Existing single-mode fibres . 13 B.1 Existing single-mode fibres . 13 B.2 Existing fibre

21、s for intraconnection . 13 Bibliography 15 Table 1 Sectional specifications . 5 Table 2 Main categories of multimode fibres 8 Table 3 Sub-categories of multimode fibres . 8 Table 4 Categories of glass core/glass clad single-mode fibres 9 Table 5 Categories of glass core/glass clad single-mode fibres

22、 for intraconnection 10 Table A.1 Existing multimode fibres . 12 Table B.1 Existing single-mode fibres 13 Table B.2 Existing fibres for intraconnection 14 BS EN 60793-2:2016IEC 60793-2:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 2: Product specifications General F

23、OREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the

24、electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to

25、 technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International

26、Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each tech

27、nical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publ

28、ications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nat

29、ional and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment se

30、rvices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, se

31、rvants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publica

32、tion, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibili

33、ty that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60793-2 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre

34、 optics. This eighth edition cancels and replaces the seventh edition published in 2011. This edition constitutes a technical revision which was necessary due to the addition of new fibre models to the A1 category in IEC 60793-2-10. This edition includes the following significant technical changes w

35、ith respect to the previous edition: a) addition of two new sub-categories A3f and A3g indicated “under consideration” as they have not yet been fully standardized at the moment of finalizing this document; b) modification of the Numerical aperture heading in Table 3 in line with recent modification

36、s in all A1, A2, A3 and A4 multimode product specifications (NAffonly). This standard is to be read in conjunction with the IEC 60793-1 series. BS EN 60793-2:2016 4 IEC 60793-2:2015 IEC 2015 The text of this standard is based on the following documents: CDV Report on voting 86A/1645/CDV 86A/1663/RVC

37、 Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60793 series, published under the general title Opt

38、ical fibres, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will

39、be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document

40、using a colour printer. BS EN 60793-2:2016IEC 60793-2:2015 IEC 2015 5 OPTICAL FIBRES Part 2: Product specifications General 1 Scope This part of IEC 60793 contains the general specifications for both multimode and single-mode optical fibres. Sectional specifications for each of the four categories m

41、ultimode fibres: A1, A2, A3, and A4 (part of the multimode fibre class A) contain requirements specific to each category. Sectional specifications for each of the two single-mode fibre classes, B and C, contain requirements common to each class. Each sectional specification includes family specifica

42、tions (in normative annexes) that contain requirements for the applicable category or sub-categories. These sub-categories are distinguished on the basis of different fibre types or applications. The requirements of this standard apply to all classes. Each sectional specification contains the requir

43、ements that are common to all the family specifications that are within it. These common requirements are copied to the family specification for ease of reference. Tests or measurement methods are defined for each specified attribute. Where possible, these definitions are by reference to an IEC stan

44、dard otherwise the test or measurement method is outlined in the relevant sectional specification. Table 1 defines the sectional specifications. The relevant family specifications are defined within the sectional specifications as normative annexes (see Tables 2 to 5). Annexes A and B summarize the

45、existing fibre specifications. Table 1 Sectional specifications Document ID Fibre category / class Cladding material Core material Index profile IEC 60793-2-10 A1 multimode Glass Glass Graded IEC 60793-2-20 A2 multimode Glass Glass Quasi-step or step IEC 60793-2-30 A3 multimode Plastic Glass Step or

46、 graded (under consideration) IEC 60793-2-40 A4 multimode Plastic Plastic Step, multi-step or graded IEC 60793-2-50 B single-mode Glass Glass Not applicable IEC 60793-2-60 C single-mode Glass Glass Not applicable BS EN 60793-2:2016 6 IEC 60793-2:2015 IEC 2015 2 Normative references The following doc

47、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60304, Standard colo

48、urs for insulation for low-frequency cables and wires IEC 60793-1 (all parts), Optical fibres Part 1: Measurement methods and test procedures IEC 60793-2-10, Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres IEC 60793-2-20, Optical fibres Part

49、2-20: Product specifications Sectional specification for category A2 multimode fibres IEC 60793-2-30, Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres IEC 60793-2-40, Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-m