EN 60794-1-1-2016 en Optical fibre cables - Part 1-1 Generic specification - General.pdf

1、BSI Standards PublicationOptical fibre cablesPart 1-1: Generic specification GeneralBS EN 60794-1-1:2016National forewordThis British Standard is the UK implementation of EN 60794-1-1:2016. It isidentical to IEC 60794-1-1:2015. It supersedes BS EN 60794-1-1:2011 whichis withdrawn.The UK participatio

2、n in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibresand cables.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions

3、 ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87470 3ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under

4、 the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60794-1-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60794-1-1 February 2016 ICS 33.180.10 Supersedes EN 60794-1-1:2011 En

5、glish Version Optical fibre cables - Part 1-1: Generic specification - General (IEC 60794-1-1:2015) Cbles fibres optiques - Partie 1-1 : spcification gnrique - Gnralits (IEC 60794-1-1:2015) Lichtwellenleiterkabel - Teil 1-1: Fachgrundspezifikation - Allgemeines (IEC 60794-1-1:2015) This European Sta

6、ndard was approved by CENELEC on 2015-12-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

7、ning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC mem

8、ber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ

9、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization

10、 Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60794-1-1:2016 E

11、 BS EN 60794-1-1:2016EN 60794-1-1:2016 2 European foreword The text of document 86A/1651/CDV, future edition 4 of IEC 60794-1-1, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-1-1:2016. The followi

12、ng dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-18 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-18 This docum

13、ent supersedes EN 60794-1-1:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Sta

14、ndard IEC 60794-1-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-2-10 NOTE Harmonized as EN 60793-2-10. IEC 60794-1-2 NOTE Harmonized as EN 60794-1-

15、2. IEC 60794-1-23 NOTE Harmonized as EN 60794-1-23. IEC 60794-1-24 NOTE Harmonized as EN 60794-1-24. IEC 60794-4:2003 NOTE Harmonized as EN 60794-4:2003. IEC 60794-4-20:2012 NOTE Harmonized as EN 60794-4-20:2012. IEC 60794-4 (series) NOTE Harmonized as EN 60794-4:2003 (series). BS EN 60794-1-1:2016E

16、N 60794-1-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only th

17、e edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the

18、latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60189-1 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods - - IEC 60304 - Standard colours for insula

19、tion for low-frequency cables and wires HD 402 S2 - IEC 60793-1-21 - Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-1-4

20、4 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 - IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance EN 60793-1-46 - IEC 60793-1-48 - Optical fibres - Part 1-

21、48: Measurement methods and test procedures - Polarization mode dispersion EN 60793-1-48 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

22、 EN 60793-2-50 - IEC 60794-1-21 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods EN 60794-1-21 - IEC 60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental te

23、st methods EN 60794-1-22 - IEC 60811-201 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness EN 60811-201 - IEC 60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202

24、: General tests - Measurement of thickness of non-metallic sheath EN 60811-202 - IEC 60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions EN 60811-203 - ISO 14001 - Environmental management systems_- Req

25、uirements with guidance for use - - BS EN 60794-1-1:2016EN 60794-1-1:2016 4 ISO 14064-1 - Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals EN ISO 14064-1 - IEC/TR 61931 - Fibre optic - Terminolo

26、gy - - BS EN 60794-1-1:2016 2 IEC 60794-1-1:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Graphical symbols and abbreviations. 12 5 Optical fibre cables 13 6 Materials . 13 6.1 Optical fibre 13 6.1.1 General . 13 6.1.2 Attenuation coefficient . 13

27、 6.1.3 Attenuation uniformity Attenuation discontinuities . 13 6.1.4 Cable cut-off wavelength . 14 6.1.5 Fibre colouring. 14 6.1.6 Polarization mode dispersion (PMD) 14 6.2 Electrical conductors . 14 6.3 Other materials . 14 6.4 Environmental requirements . 14 7 Cable construction . 14 7.1 General .

28、 14 7.2 Colour coding . 15 7.2.1 Overview . 15 7.2.2 Unit colour coding 15 7.2.3 Sheath colour coding . 15 8 Measuring methods . 15 8.1 General . 15 8.2 Measuring methods for dimensions . 15 8.3 Measuring methods for mechanical characteristics . 16 8.4 Measuring methods for electrical characteristic

29、s . 16 8.5 Measuring methods for transmission and optical characteristics 16 8.6 Measuring methods for environmental characteristics . 17 8.7 Measuring methods for cable element characterisation . 17 9 Related Technical Reports . 17 Annex A (informative) Guidelines for specific defined applications

30、and cabled fibre performance . 18 A.1 General . 18 A.2 Cabled fibre attenuation requirements. 18 A.3 Cabled fibre bandwidth requirements 19 A.4 Type testing at 1 625 nm . 20 Annex B (informative) Guidelines for qualification sampling . 21 B.1 General . 21 B.2 Fibre selection for cable testing 21 B.3

31、 Pass/fail criteria 21 Bibliography 23 Table 1 Measuring methods for dimensions . 16 BS EN 60794-1-1:2016IEC 60794-1-1:2015 IEC 2015 3 Table 2 Measuring methods for electrical characteristics . 16 Table 3 Measuring methods for transmission and optical characteristics of cabled optical fibres . 17 Ta

32、ble A.1 Maximum cabled fibre attenuation coefficient (dB/km), as given by ITU-T 18 Table A.2 Category A1 multimode fibre maximum cable attenuation coefficient (dB/km) . 19 Table A.3 Single-mode maximum cable attenuation coefficient (dB/km) . 19 Table A.4 Category A1 multimode cabled fibre bandwidth

33、(MHzkm) 20 Table A.5 Guidance values for 1 625 nm type test acceptance criteria . 20 BS EN 60794-1-1:2016 4 IEC 60794-1-1:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 1-1: Generic specification General FOREWORD 1) The International Electrotechnical Commission (

34、IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addit

35、ion to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interest

36、ed in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with

37、conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC

38、 National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for t

39、he way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between an

40、y IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformi

41、ty. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members

42、of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or an

43、y other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may b

44、e the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-1-1 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the th

45、ird edition, published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the expansion of the definitions, graphical symbols, terminology and abbreviations content, with the aim of making

46、 this standard the default and reference for all others in the IEC 60794-x series; b) the inclusion of updated and expanded optical fibre, attenuation and bandwidth sections, with the aim of making this standard the default and reference for all others in the IEC 60794-x series. BS EN 60794-1-1:2016

47、IEC 60794-1-1:2015 IEC 2015 5 The text of this standard is based on the following documents: CDV Report on voting 86A/1651/CDV 86A/1667/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the I

48、EC 60794 series, published under the general title Optical fibre cables, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability dat

49、e indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct und