EN 60794-3-20-2016 en Optical fibre cables - Part 3-20 Outdoor cables - Family specification for self-supporting aerial telecommunication cables.pdf

1、Optical fibre cablesPart 3-20: Outdoor cables Family specification for self-supporting aerial telecommunication cablesBS EN 60794-3-20:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60794-3-20

2、:2016. It isidentical to IEC 60794-3-20:2016. It supersedes BS EN 60794-3-20:2009which is withdrawn.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibres and cables.A list of organizations represented on this comm

3、ittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87467 3ICS 33.180.1

4、0Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60794-3-20:

5、2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60794-3-20 December 2016 ICS 33.180.10 Supersedes EN 60794-3-20:2009 English Version Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables (IEC 60794-3-20:2016) Cbles fibres

6、 optiques - Partie 3-20: Cbles extrieurs - Spcification de famille pour les cbles de tlcommunication ariens autoporteurs (IEC 60794-3-20:2016) Lichtwellenleiter - Teil 3-20: Auenkabel - Familienspezifikation fr selbsttragende LWL-Fernmelde-Luftkabel (IEC 60794-3-20:2016) This European Standard was a

7、pproved by CENELEC on 2016-10-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n

8、ational standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into it

9、s own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced

10、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Euro

11、pen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60794-3-20:2016 E BS EN 607

12、94-3-20:2016EN 60794-3-20:2016 2 European foreword The text of document 86A/1733/FDIS, future edition 3 of IEC 60794-3-20, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-3-20:2016. The following da

13、tes are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-10-20 This document s

14、upersedes EN 60794-3-20:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standar

15、d IEC 60794-3-20:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60794-1-2 NOTE Harmonized as EN 60794-1-2. IEC 60794-3 (Series) NOTE Harmonized as EN 60794-3

16、(Series). BS EN 60794-3-20:2016EN 60794-3-20:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicati

17、on. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE

18、 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC 60794-1-1 - EN 60794-1-1 - IEC 60794-1-21 - Op

19、tical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods EN 60794-1-21 - IEC 60794-1-22 2012 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods EN 60794-1-22 2012 IEC

20、 60794-3 2014 Optical fibre cables - Part 3: Outdoor cables - Sectional specification EN 60794-3 2015 IEC 60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions EN 60811-203 - IEC 60811-302 - Electric and

21、optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 C and 100 C of filling compounds EN 60811-302 - BS EN 60794-3-20:2016 2 IEC 60794-3-20:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references. 5 3 Ter

22、ms and definitions 5 4 Symbols and abbreviations 6 5 General Requirements . 6 5.1 Optical fibres. 6 5.2 Cable elements . 6 5.3 Optical fibre cable construction 6 6 Details of family requirements and test conditions for optical fibre cable tests . 6 6.1 General . 6 6.2 Tensile performance 6 6.3 Crush

23、 7 6.4 Impact 7 6.5 Repeated bending . 7 6.6 Torsion . 7 6.7 Bend . 8 6.8 Bending under tension. 8 6.9 Temperature cycling 9 6.10 Water penetration . 9 6.11 Aging 9 6.12 Installation conditions 9 Annex A (normative) Blank detail specification and minimum requirements . 10 A.1 Cable description 10 A.

24、2 Cable construction 12 Annex B (informative) Examples of cables construction and installation 13 Bibliography . 14 Figure B.1 Lashed and suspended cable 13 Figure B.2 SSW cable (self-supporting with windows) . 13 Figure B.3 Round aerial self-supported cable . 13 BS EN 60794-3-20:2016IEC 60794-3-20:

25、2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 3-20: Outdoor cables Family specification for self-supporting aerial telecommunication cables FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprisi

26、ng all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standard

27、s, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparat

28、ory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizati

29、ons. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of re

30、commendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by

31、 any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional

32、publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by in

33、dependent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for a

34、ny personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normat

35、ive references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held respons

36、ible for identifying any or all such patent rights. International Standard IEC 60794-3-20 has been prepared by Subcommittee 86A: Fibres and cables, of IEC Technical Committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2009. It constitutes a technical re

37、vision. This edition includes the following significant technical changes with respect to the previous edition: a) the specification has been streamlined by cross-referencing IEC 60794-1-1, IEC 60794-1-2 and the IEC 60794-3 series; b) an annex containing the MICE table has been deleted; c) an annex

38、on examples has been added. BS EN 60794-3-20:2016 4 IEC 60794-3-20:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 86A/1733/FDIS 86A/1760/RVD Full information on the voting for the approval of this standard can be found in the report on voting indic

39、ated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60794-3 series, published under the general title Optical fibre cables Part 3: Outdoor cables, can be found on the IEC website. The committee has decided that

40、the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTA

41、NT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 60794-3-20:2016IEC 60794-3-20:2016 IEC 2016 5 O

42、PTICAL FIBRE CABLES Part 3-20: Outdoor cables Family specification for self-supporting aerial telecommunication cables 1 Scope This part of IEC 60794, which is a family specification, covers optical self-supporting aerial telecommunication cables. Requirements of the sectional specification IEC 6079

43、4-3 for duct, buried and aerial cables are applicable to cables covered by this standard. Self-supporting aerial telecommunication cable in this context means a cable construction with sufficient strength members designed to be suspended on poles and similar devices without the aid of another suppor

44、ting wire or conductor. ADSS cables installed on power lines which require special sheath material for tracking and erosion resistance and other constructions intended for high-voltage applications are not covered by this standard. Detail specifications may be prepared based on this family specifica

45、tion. NOTE IEC TR 62839-1 gives rules to build an environmental declaration if needed. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For

46、 undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2, Optical fibres Part 2: Product specifications General IEC 60794-1-1, Optical fibre cables Part 1-1: Generic specification General IEC 60794-1-21, Optical fibre cables Part 1-21: Generi

47、c specification Basic optical cable test procedures Mechanical tests methods IEC 60794-1-22:2012, Optical fibre cables Part 1-22: Generic specification Basic optical cable test procedures Environmental tests methods IEC 60794-3:2014, Optical fibre cables Part 3: Outdoor cables Sectional specificatio

48、n IEC 60811-203, Electric and optical fibre cables Test methods for non-metallic materials Part 203: General tests Measurement of overall dimensions IEC 60811-302, Electric and optical fibre cables Test methods for non-metallic materials Part 302: Electrical tests Measurement of the d.c. resistivity

49、 at 23 C and 100 C of filling compounds 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60794-1-1 apply. BS EN 60794-3-20:2016 6 IEC 60794-3-20:2016 IEC 2016 4 Symbols and abbreviations For the purposes of this document, the symbols and abbreviations given in IEC 60794-1-1 apply. 5 General Requirements 5.1 Optical fibres The optical fibre shall conform to the requirements of IEC 60