EN 60835-2-1-1994 en Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2 Measurements on Terrestrial Radio- Relay Systems Section 2 1 G.pdf

1、3404583 0348029 480 BRITISH STANDARD Methods of measurement for equipment used in digital microwave radio transmission systems Part 2. Measurements on terrestrial radio-relay systems Section 2.1 General Tiw European Standard ES 60835-2-1 : 1992 has the status of a rit ish Standard BS EN BS 7573 : Se

2、ction 2.1 : 1992 IEC 835-2-1 : 1990 60835-2-1 : 1994 3404583 DL48030 LT2 BS 7573 : Section 2.1 : 1992 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Electronic Equipment Standards Policy Committee (EEL/-) to Technical Committee EEL/25,

3、upon which the following bodies were represented: British Broadcasting Corporation British Radio and Electronic Equipment Manufacturers Association British Telecommunications plc independent Television Commission Institution of Electrical Engineers Radio, Electrical and Television Retailers Associat

4、ion Radiocommunications Agency The following bodies were also represented in the drafting of the standard, through subcommittees and panels: EEA (the Association of the Electronics, Telecommunications and Business Equipment Industries) ERA Technology Ltd. GAMBICA (BEAMA Ltd.) This British Standard.

5、having been prepared under the direction of the Electronic Eauioment Standards Policv 1 April 1992 I I Q BSI 1992 The following BSI references relate to the work on this standard: Committee reference EELe15 Draft for comment 90130574 DC ISBN O 580 20757 9 M 3404583 0148031 039 M BS 7573 : Section 2.

6、1 : 1992 National foreword This Section of BS 7573 has been prepared under the direction of the Electronic Equipment Standards Policy Committee. It is identical with IEC 835-2-1 Methods of measurement for equipment used in digital microwave radio transmission systems Part 2 : Measurements on terrest

7、rial radio-relay systems Section One - General, published by the International Electrotechnical Commission (IEC) . h 1992 the European Committee for Electrotechnical Standardization (CENELEC) accepted iEC 8352-1 : 1990 as European Standard EN 60835.2-1 : 1992. As a consequence of implementing the Eu

8、ropean Standard this British Standard is renumbered as BS EN 608352-1 and any reference to BS 7573 : Section 2.1 should he read as a reference to BS EN 608352-1. BS 7573 is published in three Parts. The other Parts are: part 1 Measurements common to terrestrial radio-relay systems and satellite eart

9、h stations part 3 Measurements on satellite earth stations This Section of BS 7573 is intended to be used in conjunction with BS 7573 : part 1 : Section 1.1. Cross-reference IEC 835-1-1 : 1990 Jnternationai standard Corresponding British Standard BS 7573 Methods of measurement for equipment used in

10、digital microwave radio transmission systems Part 1 Measurements common to terrestrial radio-relay systems and satellite earth stations Section 1.1 : 1992 General (Identical) Compliance with a British Standard does not of itself confer immunity from legal obligations. 3404583 0348032 T75 A NORME EXJ

11、R0PEE“E EUROPALSCHE NORM Novemlicr 1992 UDC 621.396.6 : 629.783 : 621.317.08 Descriptors: Radiocommunications, telecommunications, communication equipment, radio-relay systems, microwave frequencies, measurements, characteristics, general English version Methods of measurement for equipment used in

12、digid microwave radio transmission systems Part 2: Measurements on terrestrial radio-relay systems Section one: General (IEC 835-2-1 : 1990) Mthodes de mesure applicables au matriel utilis pour les systmes de trammission numrique en hyperfrquence Mikrowellen-Funkubemmptemen Deuxime partie : Mesures

13、applicables aux faisceaux hertziens terrestres Richtfunksystemen Section un: Gnralits (CE1 835-2-1 : 1990) Mel3verfahren fur Gerte in digitaien Teil 2: Messungen an terrestrischen Hauptabschnitt eins: Ngemehes (IEC 8352-1 : 1990) This European Standard was approved by CENELEC on 1992-09-15. CENELEC

14、members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

15、ation to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretaria

16、t has the same status as the official versions. CENELEC members are the national eiectrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, heland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC Europ

17、ean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fur Elektrotechnische Nonnimg Central Secretariat: rue de Stassart 35, B-1050 Brussels O 1992 Copyright reserved to CENELEC memberc Ref. No. EN 60835-2-1 : 1992 E - 3404583 0348033

18、901 Page 2 EN 60835-2-1 : 1992 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 835.2-1 : 1990 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as a European Standa

19、rd. The reference document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 608352-1 on 15 September 1992. The foliowing dates were ked - latest date of publication of an identical national standard (dop) 1993-09-01 - iatest date of withdrawal of conflicting nat

20、ional standards (dow) 19934941 Annexes designated nomaiive are part of the body of the standard. In this standard, amex ZA is nonnative. 835-2-1 IEC METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS Part 2: Measurements on terrestrial radio-relay systems SECTI

21、ON ONE - GENERAL 1. Scope This part of the standard, which is supplementary to Part 1, IEC 835-1-1, describes methods of measurement applicable to terrestrial radio-relay systems using digital modulation. The object of this part is to provide recommended methods of measurement for assessing the esse

22、ntial properties of terrestrial radio- relay systems as well as the associated sub-systems and it is intended to be used in conjunction with Part 1, IEC 835-1-1. Where measurements common to terrestrial radio-relay and satellite earth station systems are required, reference is made to the appro- pri

23、ate section of Part 1, IEC 835-1-1. In such cases, only those special aspects of the measurement appropriate to terrestrial radio- relay systems are described in the sections of this Part 2. The measurements described in the following sections of this part are neither mandatory nor limiting; a choic

24、e.of measurements can be made in each particular case, e.g., for bit-rates less than about 34 Mbit/s, the signature as well as some of the more sophisticated measurements may not be of interest. On the other hand more comprehensive measurements (under consi- deration) may be required for complex mod

25、ulation methods e.g. 64-QAM. Where parameters or methods of measurement are applicable only to terrestrial radio-relay systems, they are fully described within the appropriate sections of this part. 2. Normative references The following IEC publication is quoted in this standard: Publication No. 835

26、-1-1 (1990) : Methods of measurement for equipment used in digital microwave radio trans- mission systems, Part 1 : Measurements common to terrestrial radio-relay systems and satellite earth stations. Section One - General. 3404583 0348035 78Lt 9 Page 3 EN 60835-2-1 : 1992 Annex ZA (normative) Other

27、 international publications quoted in this standard with the references of the relevant European publications When the international publication has been modified by CENELEC common moditications, indicated by (mod), the relevant EN/HD applies. IEC Publication Date litle EN/HD Date 8351-1 1990 Meulod

28、s of measurement for equipment used in digital EN608351-1 1992 microwave radio transmission systems Part 1: Measurements common to terrestrial radw-rday systems und satellite earth stations Section one: General M 3404583 O148036 b1 i BS 7573 : Section 2.1 : 1992 Publication(s) referred to See nation

29、al foreword. 3404583 0148037 557 BS 7573 : 1992 IEC 835-2-1 : 1990 4 Section 2.1 : BSI 2 Park Street London w li1 2BS ES1 Linford Wocitl Milt on Key nvh MK13 (;LE BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK

30、view on standards in Europe and at the international level. It is incorporated by Royal Charter. Contract requirements A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Revisions Britis

31、h Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. Any person who finds an inaccuracy or ambiguity while using this British Standard should notify BSI without delay so that the matter may be investigated

32、swiftly. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying British Standards Orders for all British Standard publications should be addressed to the Sales Department at Milton Keynes. Informatio

33、n on standards BSI provides a wide range of information on national, European and international standards through its Library, the Standardline Database, the BSI Information Technology Service (BITS) and its Technical Help to Exporters Service. Contact Customer Information at Milton Keynes: %l: O908

34、 221166. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact the Manager, Membership Development at Milton Keynes: Tel: 0908 620022. Copyright I Copyright subs

35、ists in all BSI publications. No part of this publication may be j reproduced in anj- form without the prior permission in writing of BSI. This i does not preclude the free use, in the course of implementing the standard, of details such as symbols and size, type or grade designations. Enquiries abo

36、ut copyright should be made to the Copyright Manager, Publications at Milton Keynes. AMD 8339 Amendment No. 1 published and effective from 15 December 1994 to BS 7573 : Section 2.1 : 1992 Methods of measurement for equipment used in digital microwave radio transmission systems Part 2. Measurements o

37、n terrestrial radio-relay systems Section 2.1 General NOTE. The European Committee for Electrotechnical Standardization (CENELEC) has accepted IEC 835-2-1 : 1990 as a European Standard designated as EN 608352-1 : 1992. This amendment implements EN 608352-1 : 1992 as a British Standard in the BS EN s

38、eries. Implementation of European Standard Front cover Delete the existing outside front cover and substitute the attached. AMD 8339mecember 1994 . National foreword At the end of paragraph 1 insert the following new paragraph. In 1992 the European Committee for Electrotechnical Standardization (CEN

39、ELEC) accepted IEC 835-2-1 : 1990 as European Standard EN 608352-1 : 1992. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN 608352-1 and any reference to BS 7573 : Section 2.1 should be read as a reference to BS EN 608352-1. ARID 8339/December 1994

40、. New EN title page and foreword Immediately after the national foreword, insert the attached new EN title page and forevord page. AMD 8339/December 1994 . New annex ZA EEW25 3404583 0148039 32T BRITISH STANDARD Methods of measurement for equipment used in digital microwave radio transmission system

41、s Part 2. Measurements on terrestrial radio-relay systems Section 2.1 General The European Standard EN 60835-1-1 : 1992 has the status of a British Standard BS EN BS 7573 : Section 2.1 : 1992 IEC 835-2-1 : 1990 60835-2-1 : 1994 EUROPEAN ARD NORME EXJROPX”3 EXJROP&CHE NORM 3404583 Ol148040 041 H EN 6

42、0835-2-1 November 1992 UDC 621.396.6 : 629.783 . 621.317.08 Descripton: Radiocommunications, telecommunications, communication equipment, radio-relay systems, microwave frequencies, measurements, characteristics, general English version Methods of measurement for equipment used in digital microwave

43、radio transmission systems Part 2: Measurements on terrestrial radio-relay systems Section one: General (IEC 835-2-1 : 1990) Mthodes de mesure applicables au matriel utilis pour les systmes de transmission numrique en hyperfrquence Miiu-owellen-Funkubertragungssystemen Deuxime partie : Mesures appli

44、cables aux faisceaux hertziens terrestres Ric htfunksystemen Section un: Gnralits (CE1 835-2-1 : 1990) Me3verfahren fur Gerte in digitalen Teil 2: Messungen an terrestrischen Hauptabschnitt eins: AUgemeines (IEC 835-2-1 : 1990) This European Standard was approved by CENELEC on 1992-09-15. CENELEC me

45、mbers are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-todate lists and bibliographical references concerning such national standards may be obtained on applicati

46、on to the Central Secretariat or to any CENELEC member. This European Standard exists in three officiai versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat h

47、as the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium. Denmark, Finiand, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC Europea

48、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Centrai Secretariat: rue de Stassart 35, B-1050 Brussels O 1992 Copyright reserved to CENELEC members Ref. No. EN 608352-1 : 1992 E Page 2 EN 60835-2-1 :

49、1992 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the international Standard IEC 8352-1 : 1990 could be accepted without textual changes, has shown that no common modincations were necessary for the acceptance as a European Standard. The reference document was submitted to the CENELEC members for formai vote and was approved by CENELEC as EN 608352-1 on 15 September 1992. The following dates were xed: - latest date of publication of an identical national standard (dop) 19934901 - latest date