EN 60838-2-3-2017 en Miscellaneous lampholders - Part 2-3 Particular requirements - Lampholders for double-capped linear LED lamps.pdf

1、Miscellaneous lampholdersPart 2-3: Particular requirements Lampholders for double-capped linear LED lampsBS EN 60838-2-3:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60838-2-3 April 2017 ICS 29.140.10 Englis

2、h Version Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (IEC 60838-2-3:2016) Douilles diverses pour lampes - Partie 2-3: Rgles particulires - Douilles pour lampes LED linaires deux culots (IEC 60838-2-3:2016) Sonderfassungen - Teil 2-3

3、: Besondere Anforderungen - Lampenfassungen fr zweiseitig gesockelte rhrenfrmige LED-Lampen (IEC 60838-2-3:2016) This European Standard was approved by CENELEC on 2016-06-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

4、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official

5、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnica

6、l committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serb

7、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

8、 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60838-2-3:2017 E National forewordThis British Standard is the UK implementation of EN 60838-2-3:2017. It is identical to IEC 60838-2-3:2016. The UK participation in its preparat

9、ion was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/2, Lamp caps and holders.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions

10、 of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 85307 4ICS 29.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published und

11、er the authority of the Standards Policy and Strategy Committee on 31 May 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6083823:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60838-2-3 April 2017 ICS 29.140.10 English Version Miscellaneous lamph

12、olders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (IEC 60838-2-3:2016) Douilles diverses pour lampes - Partie 2-3: Rgles particulires - Douilles pour lampes LED linaires deux culots (IEC 60838-2-3:2016) Sonderfassungen - Teil 2-3: Besondere Anforderungen - L

13、ampenfassungen fr zweiseitig gesockelte rhrenfrmige LED-Lampen (IEC 60838-2-3:2016) This European Standard was approved by CENELEC on 2016-06-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

14、of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, G

15、erman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belg

16、ium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain

17、, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of e

18、xploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60838-2-3:2017 E BS EN 6083823:2017EN 60838-2-3:2017 2 European foreword The text of document 34B/1851/FDIS, future edition 1 of IEC 60838-2-3, prepared by IEC/SC 34B “Lamp caps and holders“ of IEC/TC 34 “La

19、mps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60838-2-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 20

20、17-10-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identify

21、ing any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is

22、 an integral part of this document. Endorsement notice The text of the International Standard IEC 60838-2-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 6

23、0400:2008 NOTE Harmonized as EN 60400:2008. IEC 60400:2008/AMD1:2011 NOTE Harmonized as EN 60400:2008/A1:2011. IEC 60400:2008/AMD2:2014 NOTE Harmonized as EN 60400:2008/A1:2014. BS EN 6083823:2017EN 60838-2-3:2017 2 European foreword The text of document 34B/1851/FDIS, future edition 1 of IEC 60838-

24、2-3, prepared by IEC/SC 34B “Lamp caps and holders“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60838-2-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publ

25、ication of an identical national standard or by endorsement (dop) 2017-10-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

26、ights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the

27、relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60838-2-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the

28、 following notes have to be added for the standards indicated: IEC 60400:2008 NOTE Harmonized as EN 60400:2008. IEC 60400:2008/AMD1:2011 NOTE Harmonized as EN 60400:2008/A1:2011. IEC 60400:2008/AMD2:2014 NOTE Harmonized as EN 60400:2008/A1:2014. EN 60838-2-3:2017 3 Annex ZA (normative) Normative ref

29、erences to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the

30、latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in t

31、his annex is available here: www.cenelec.eu. Annex ZA of EN 60838-1 applies Addition Publication Year Title EN/HD Year IEC 60061-2 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders EN 60061-2 - IEC 60061-3 - Lamp caps and holders toge

32、ther with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3 - IEC 60838-1 - Miscellaneous lampholders - Part 1: General requirements and tests EN 60838-1 - IEC 62504 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitio

33、ns EN 62504 - BS EN 6083823:2017EN 60838-2-3:2017 4 Annex ZZ (informative) Relationship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request relating to ha

34、rmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the makin

35、g available on the market of electrical equipment designed for use within certain voltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the

36、 limits of the scope of this standard, a presumption of conformity with the corresponding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014

37、/35/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes 1. General conditions a) the essential characteristics, the recognition and observance of which will ensure that electrical equipment will be used safely and in applications for which it was made, shall be marked on the electrical equipment

38、, or, if this is not possible, on an accompanying document; Clause 7 b) the electrical equipment, together with its component parts, shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All clauses c) the electrical equipment shall be so designed and m

39、anufactured as to ensure that protection against the hazards set out in points 2 and 3 is assured, providing that the equipment is used in applications for which it was made and is adequately maintained. See item 2 and 3 of this table 2. Protection against hazards arising from the electrical BS EN 6

40、083823:2017EN 60838-2-3:2017 4 Annex ZZ (informative) Relationship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request relating to harmonised standards in

41、 the field of the Low Voltage Directive, M/511, to provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the ma

42、rket of electrical equipment designed for use within certain voltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope

43、of this standard, a presumption of conformity with the corresponding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / su

44、b-clause(s) of this EN Remarks / Notes 1. General conditions a) the essential characteristics, the recognition and observance of which will ensure that electrical equipment will be used safely and in applications for which it was made, shall be marked on the electrical equipment, or, if this is not

45、possible, on an accompanying document; Clause 7 b) the electrical equipment, together with its component parts, shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All clauses c) the electrical equipment shall be so designed and manufactured as to ens

46、ure that protection against the hazards set out in points 2 and 3 is assured, providing that the equipment is used in applications for which it was made and is adequately maintained. See item 2 and 3 of this table 2. Protection against hazards arising from the electrical EN 60838-2-3:2017 5 equipmen

47、t Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that: a) persons and domestic animals are adequately protected against the danger of physical injury or other harm which might be caused by direct or indirect contact; Clauses 4, 8, 9, 10, 11, 12 and 1

48、4 b) temperatures, arcs or radiation which would cause a danger, are not produced; Clauses 11, 12, 15, 16 and 17 c) persons, domestic animals and property are adequately protected against non-electrical dangers caused by the electrical equipment which are revealed by experience; Clauses 4, 11, 13, 1

49、6 and 18 d) the insulation is suitable for foreseeable conditions. Clauses 8, 10, 11, 13, 15 and 17 3. Protection against hazards which may be caused by external influences on the electrical equipment Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical equipment: a) meets the expected mechanical requirements in such a way that persons, domestic animals and property are not endangered; Clauses 7, 11, 13 and 18 b) is resistant to non-mechanical influe