EN 60864-2-1997 en fr Standardization of Interconnections between Broadcasting Transmitters or Transmitter Systems and Supervisory Equipment Part 2 Interface Standards for Systems .pdf

1、 STD-BSI BS EN bOBb4-2-ENGL 1777 m Lb24bb9 Ob117440 7b7 m BRITISH STANDARD Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 2. Interface standards for systems using data bus type interconnections The European Standard EN 6086

2、4-2 : 1997 has the status of a British Standard ICs 33.160.20;33.200 BS EN 60864-2 : 1997 IEC 60864-2 : 1997 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STD-BSI BS EN bb4-2-ENGL 1777 W lb24bb7 Ob47441 bT5 W This British Standard, having direction of the Electrotechcal Sect

3、or Board, was published under the authority of the Standards Board and comes into effect on 15 October 1997 been prepared under the Amd. No. O BSI 1997 ISBN O 680 28439 6 BS EN 60864-2 1997 Date Text affected National foreword This British Standard is the English language version of EN 60864-2 : 199

4、7. It is identical with IEC 60864-2 : 1997. The UK participation in its prepamtion was entrusted to Technical Committee EPU103, Transmitting equipment for radiocommunication, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible internaiionaUEuropean c

5、ommittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related intedonal and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 Ja

6、nuary 1997, ali iEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Atte

7、ntion is dram to the fact that CEN and CENELEC Standards normaiy include an annex which lists normative references to internaiional publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI

8、Standards Catalogue under the section entitled Intedonal Standards Correspondence Index, or by using the Find facility of the BSI hdards Electronic Catidogue. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fron

9、t cover, an inside front cover, the EN title page, pages 2 to 41, a blank page, an inside back cover and back cover. STD-BSI BS EN bUAb4-2-ENGL 1997 Lb24bb9 Ob47LI42 531 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60864-2 July 1997 ICs 33.1 60.20; 33.200 Descriptors: Radiocommunications, so

10、und broadcasting, television broadcasting, transminers, circuit interconnection, remote control, remote supervision, interfaces English version Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 2: Interface standards for syste

11、ms using data bus type interconnections (IEC 60864-2: 1 997) Normalisation des interconnexions entre les metteurs ou les systmes dmetteurs de radiodiffusion et les systmes de tlsurveillance Partie 2: Normes dinterface pour les Normung der Zusammenschaltung von Rundfunksendern oder Sendersystemen mit

12、 Fernwirkeinrichtungen Teil 2: Schnittstellen fr Anlagen mit Datenbus-Verbindungen systmes interconnexions canalises i (IEC 60864-2: 1997) (CE1 60864-2: 1997) This European Standard was approved by CENELEC on 1997-07-01. CENELEC members are bound to comply with the CENICENELEC Internal Regulations w

13、hich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This Europe

14、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are th

15、e national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland. Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de N

16、ormalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 1997 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60864-2:1997 E STD-BSI BS EN bOBb4-2-EN

17、GL 1777 H 1b24bb7 Ob47443 478 H Page 2 EN 60864-2 : 1997 Foreword The text of document 103/3/FDIS, future edition 1 of IEC 60864-2, prepared by IEC TC 103, Transmitting equipment for radiocommunication, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60864-2 on 1997-

18、07-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1998-04-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (daw) 1 998-04-0

19、 1 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annexes A, B and C are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the Internationa

20、l Standard IEC 60864-2: 1997 was approved by CENELEC as a European Standard without any modification. In the official version, for annex C, Bibliography, the following note has to be added for the standard indicated: IEC 60864-1 NOTE: Harmonized, together with its amendment 1 :1987, as HD 577 S1:199

21、0 (not modified). . STD-BSI BS EN bOBb4-2-ENGL 1977 m Lb24bb9 b47444 304 Page 3 EN 60864-2 : 1997 CONTENTS INTRODUCTION . clause 1 scope . 2 Normative references . 3 General aspects . 3.1 Definitions 3.2 General philosophy 3.3 Interfaces . 3.4 Transmitter systems . 4 5 Requirements for data bus inte

22、rconnections Basic set of commands and indications . 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 Introduction Single transmitter facilities . Passive reserve system facilities . Active reserve system facilities Muitiplex resew8 system facilities Auxiliary features Dual drive transmitter facilities (OD Tx) . (N

23、+ 1) reserve system facilities . 6 General system requirements . 6.1 Introduction 6.2 Standard requirements for all systems Annexes A Simplified diagrams of commonly used transmitter system . B EnglisNFrench glossary of tens used in this standard . C Bibliography ZA (normative) Normative references

24、to international publications with their corresponding European publications . 4 5 5 5 5 9 10 10 11 14 14 15 18 21 24 27 30 32 33 33 33 34 38 40 41 Page 4 EN 60864-2 : 1997 INTRODUCTION The majority of broadcasting transmitting stations are designed and constructed to operate unattended, that is wit

25、hout personnel being present in the same room as the transmitter. Normally, supervisory equipment is installed which continuously monitors and sometimes controls the operation of the transmitters. The supervisory equipment may range from a simple unit which merely extends indications and controls in

26、to an adjacent room, to a highly sophisticated system enabling a large number of transmitters to be controlled from a common point. The majority of existing transmitters employ wired interconnections; however, the advent of microprocessors and software techniques will require different interconnecti

27、on methods, for example, by means of optical fibres. It therefore seems appropriate to divide IEC 60864 into two parts, part 1 dealing with dedicated interconnections and part 2 dealing with data bus type interconnections. STD.BSI BS EN bOBb4-2-ENGL 1997 lb24bb7 Ob117114b 187 m Page 5 EN 60864-2 : 1

28、997 STANDARDIZATION OF INTERCONNECTIONS BETWEEN BROADCASTING TRANSMITTERS OR TRANSMITTER SYSTEMS AND SUPERVISORY EQUIPMENT - Part 2: Interface standards for systems using data bus type interconnections 1 Scope This part of IEC 60864 is applicable to all classes of transmitters for sound and televisi

29、on broadcasting. This standard may not, however, be appropriate for low power equipment, for simple transmitting systems which consist of a small number of controlled equipment items and for certain special purpose transmitters. Any facilities and interconnections not directly associated with the tr

30、ansmitters, for example intruder alarms, mast lighting, etc., are excluded from this standard. This part of IEC 60864 deals with the interface between a transmitter (or system of transmitters) and the supervisory equipment which is intended to remotely monitor and/or control the transmitter(s). It d

31、etails the interconnections and facilities to be provided with a view to achieving compatibility between different types and makes of transmitters and supervisory equipment. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute

32、provisions of this part of IEC 60864. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60864 are encouraged to investigate the possibility of applying the most recent editions of the no

33、rmative documents indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 60559: 1989, Binary floating-point arithmetic for microprocessor systems IEC 60625-2: 1993, Programmable measuring instruments - Interface system (byte serial, bit parallel) -

34、 Part 2: Codes, formats, protocols and common commands ISO/I EC 8482: 1 993, Information technology - Telecommunications and information exchange between systems - Twisted pair multipoint interconnections IEEE 1 1 18: 1990, Microcontroller-system, Serial control bus 3 General aspects 3.1 Definitions

35、 For the purpose of this part of IEC 60864, the following definitions apply. 3.1.1 is always dedicated as the reserve. (N + 1) dedicated reserve system: (N + 1) reserve system where the carne transmitter STD-BSI BS EN bOBb4-2-ENGL 1997 = Lb24bb9 Ob47447 0L3 Page 6 EN 60864-2 : 1997 3.1.2 (N + 1) res

36、erve system: System of transmitters in which only one reserve is provided for N (N 1) transmitters in operation. See figure AS. 3.1.3 active reserve: System of transmitters in which the reserve is in continuous use and contributes to the output power, for example, parallel operation. See figure A.3.

37、 3.1.4 alarm: Indication of an abnormal status. 3.1.5 automatic: Term used to describe a system which acts in a predetermined way, without the external intervention of an operator. See figure 1 3.1.6 automatic changeover: Changeover action, which occurs in a preselected way, without the external int

38、ervention of an operator. 3.1.7 basic transmitter: Individual transmitters in a system consisting of more than one t ransm i t te r. 3.1.8 changeover: Transfer from one signal path or item of equipment to another, normally a spare or reserve, provided as part of a transmitter system. 3.1.9 command:

39、Action by means of which any part of a transmitter system is made to change its status. 3.1.10 command circuit: Circuit in a supervisory system, by means of which each command is sent to the transmitter. 3.1.1 1 associated equipment by means of one or more commands. control system: System used to op

40、erate a transmitter, transmitter system and/or the See figure 1. 3.1.12 drive (excitation) (exciter): Low level radio frequency part of a transmitter or transmitter system. The drive may be either - unmodulated, for example, a simple crystal oscillator (sometimes referred to as excitation), or - mod

41、ulated, sometimes followed by amplifiers to form a “drive transmitter“. See figure A.6. 3.1.1 3 fault (failure) (fail): Abnormal condition of the equipment which usually results in the generation of an alarm. 3.1.14 indication: Information concerning the status, or quality, relating to an item of eq

42、uipment or system. * * m STD-BSI BS EN bOBbY-2-ENGL 1777 D 1b2Ybb7 bi-17448 T5T Page 7 EN 60864-2 : 1997 Quality indications may be either - objective, for example, metering in digital or analogue form, insertion test signal (ITS) measurements, or - subjective, for example, assessment of picture or

43、sound quality on a picture monitor or loudspeaker. 3.1.15 indication circuit: Circuit in a supervisory system, by means of which each indication is sent from the transmitter. See figure 1 3.1.16 inhibit: Temporary state into which the transmitter is switched due to an abnormal condition (e.g. flasho

44、ver) for a short period of time. It resumes normal operation automatically after a certain time has elapsed. 3.1.17 interface: Boundary between one part of an item of equipment or system and another. 3.1.18 local: Term used to describe commands and indications which are part of the transmitting equi

45、pment or system logic. See figure 1. 3.1.19 lock-out: Term used to describe the status of an item of equipment or system which has been switched off or changed over automatically because of a fault or other abnormal condition and usually requires manual intervention to reset. 3.1.20 logic. Deduction

46、 and/or execution of output conditions dependent upon input conditions. 3.1.21 logic unit unavailable: Message which indicates that automatic switchover is not possible because of failure in the logic unit itself or because a changeover is at that instant in the process of being executed. 3.1.22 man

47、ual: Term used to describe an action taken by an operator either locally or remotely. See figure 1 3.1.23 manual control: Mode of operation of the system logic which inhibits automatic changeover. 3.1.24 modulated: Normal operating state of the transmitter which is broadcasting with modulation. 3.1.

48、25 momentary closure: Short duration contact closure rather than a continuous contact closure for command. 3.1.26 monitoring system: System used for checking the status and/or performance of a transmitter or transmitter system and which normally comprises both status and quality indications. See fig

49、ure 1. Page 8 EN 60864-2 : 1997 3.1.27 multiplex reserve system: System of television transmitters whose configuration can be changed in case of a fault to permit either the vision or the sound amplifier to operate as a common reserve for vision and sound. See figure A.4. 3.1.28 off: State during which the transmitter is switched off. The control system is still capable of receiving orders and giving information about the state of the transmitter. 3.1.29 parallel operation: Operation when two or more transmitters are arranged so that their outputs are in p