EN 60870-6-702-2014 en Telecontrol equipment and systems - Part 6-702 Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providi.pdf

1、BSI Standards PublicationTelecontrol equipment and systemsPart 6-702: Telecontrol protocols compatible withISO standards and ITU-T recommendations -Functional profile for providing the TASE.2 application service in end systemsBS EN 60870-6-702:2014National forewordThis British Standard is the UK imp

2、lementation of EN 60870-6-702:2014. Itis identical to IEC 60870-6-702:2014. It supersedes BS EN 60870-6-702:1999which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/57, Power systems management and associated information exchange.A list of organizations

3、represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0

4、 580 78270 1ICS 33.200 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 6

5、0870-6-702:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60870-6-702 October 2014 ICS 33.200 Supersedes EN 60870-6-702:1998 English Version Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile fo

6、r providing the TASE.2 application service in end systems (IEC 60870-6-702:2014) Matriels et systmes de tlconduite - Partie 6-702: Protocoles de tlconduite compatibles avec les normes ISO et les recommandations de lUIT-T - Profil fonctionnel pour fournir le service dapplication TASE.2 dans les systm

7、es finals (CEI 60870-6-702:2014) Fernwirkeinrichtungen und -systeme - Teil 6-702: Fernwirkprotokolle, die mit ISO-Normen und ITU-T-Empfehlungen kompatibel sind - Funktionsprofil fr den TASE.2-Anwendungsdienst in Endsystemen (IEC 60870-6-702:2014) This European Standard was approved by CENELEC on 201

8、4-08-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

9、obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notifi

10、ed to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr

11、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Elec

12、trotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60870-6-702:2014 E BS EN 60870-6-702:2014EN 60870-6-

13、702:2014 - 2 - Foreword The text of document 57/1454/FDIS, future edition 2 of IEC 60870-6-702, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60870-6-702:2014. The following dates are

14、fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-05-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-08-19 This document supersede

15、s EN 60870-6-702:1998. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 6

16、0870-6-702:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60870-6-802:2014 NOTE Harmonized as EN 60870-6-802:2014 (not modified). BS EN 60870-6-702:2014- 3 -

17、EN 60870-6-702:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only t

18、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the

19、 latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60870-6-503 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and p

20、rotocol EN 60870-6-503 - IEC/TS 62351-4 - Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS - - ISO/IEC 8327-2 - Information technology - Open Systems Interconnection - Connection-oriented Session protocol: Protocol Imple

21、mentation Conformance Statement (PICS) proforma - - ISO/IEC 8650-2 - Information technology - Open Systems Interconnection - Protocol specification for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) proforma - - ISO/IEC 8823-2 - Information technology -

22、 Open Systems Interconnection - Connection-oriented presentation protocol: Protocol Implementation Conformance Statement (PICS) proforma - - ISO 9506-1 2003 Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition - - ISO 9506-2 2003 Industrial automation syst

23、ems - Manufacturing Message Specification - Part 2: Protocol specification - - BS EN 60870-6-702:2014EN 60870-6-702:2014 - 4 - Publication Year Title EN/HD Year ISO/ISP 14226-1 1996 1)Industrial automation systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Pa

24、rt 1: Specification of ACSE, Presentation and Session protocols for the use by MMS - - ISO/ISP 14226-2 1996 1)Industrial automation systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 2: Common MMS requirements - - RFC 2126 - ISO Transport Service on top

25、of TCP (ITOT) - - 1)Withdrawn. BS EN 60870-6-702:2014 2 IEC 60870-6-702:2014 IEC 2014 CONTENTS INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms and definitions 9 4 Abbreviations . 9 5 Profile protocol stacks . 9 6 Conformance requirements 10 6.1 General . 10 6.2 TASE.2 requirements 10 6.3

26、 MMS requirements 10 6.4 Upper layers requirements 10 6.5 Lower Layer requirements . 10 Annex A (normative) ISPICS requirements lists . 11 A.1 General . 11 A.2 Classification of requirements . 11 A.2.1 General . 11 A.2.2 Base column 11 A.2.3 F/S column 12 A.2.4 Status column 12 A.2.5 Profile column

27、12 A.3 TASE.2 . 13 A.4 MMS . 18 A.4.1 General . 18 A.4.2 MMS Identifier . 19 A.4.3 MMSString . 19 A.4.4 ObjectName . 19 A.4.5 Supported MMS PDUs . 19 A.4.6 PDU-specific requirements 25 A.5 ACSE 29 A.5.1 Supported functions . 29 A.5.2 Initiator/responder capability 30 A.5.3 Supported APDUs 31 A.5.4 S

28、upported APDU parameters . 32 A.5.5 Supported parameter forms . 33 A.6 Presentation . 34 A.7 Session . 35 Bibliography 36 Figure 1 Applicability of functional profile . 8 Table A.1 Client/Server capability 13 Table A.2 TASE.2 CBBs 13 Table A.3 Association management . 14 BS EN 60870-6-702:2014IEC 60

29、870-6-702:2014 IEC 2014 3 Table A.4 Data value . 14 Table A.5 Data sets . 14 Table A.6 Accounts 15 Table A.7 DS transfer sets . 15 Table A.8 Time series transfer set objects . 16 Table A.9 Transfer account transfer set objects . 16 Table A.10 Information message objects 16 Table A.11 Special transfe

30、r set objects 17 Table A.12 SBO devices 17 Table A.13 Programs . 17 Table A.14 Event enrollments 18 Table A.15 Event conditions. 18 Table A.16 Object models 18 Table A.17 Environment and general management 19 Table A.18 MMS modifiers . 20 Table A.19 Parameter CBBs 21 Table A.20 VMD support 21 Table

31、A.21 Domain management . 22 Table A.22 Program invocation management . 22 Table A.23 Variable access 23 Table A.24 Semaphore management . 23 Table A.25 Operator communication 23 Table A.26 Event management 24 Table A.27 Journal management 24 Table A.28 File access . 24 Table A.29 File management . 2

32、5 Table A.30 Data exchange management 25 Table A.31 AccessControl 25 Table A.32 Additional PDUs . 25 Table A.33 GetNameList conformance statement . 26 Table A.34 VariableAccessSpecification conformance statement . 26 Table A.35 VariableSpecification conformance statement 27 Table A.36 Read conforman

33、ce statement . 27 Table A.37 Write conformance statement . 27 Table A.38 InformationReport conformance statement . 28 Table A.39 GetVariableAccessAttributes conformance statement . 28 Table A.40 DefineNamedVariableList conformance statement 28 Table A.41 GetNamedVariableListAttributes conformance st

34、atement . 29 Table A.42 DeleteNamedVariableList conformance statement 29 Table A.43 Protocol versions . 29 Table A.44 Other protocol versions 30 Table A.45 Technical corrigenda implemented . 30 Table A.46 Global statement of conformance . 30 BS EN 60870-6-702:2014 4 IEC 60870-6-702:2014 IEC 2014 Tab

35、le A.47 Protocol mechanisms . 30 Table A.48 Association establishment procedure . 30 Table A.49 Normal release procedure 31 Table A.50 Abnormal release procedure 31 Table A.51 Functional units 31 Table A.52 ACSE Supported APDUs 31 Table A.53 A-associate-request APDU . 32 Table A.54 A-associate-respo

36、nse APDU 32 Table A.55 A-release-request APDU 32 Table A.56 A-release-response APDU . 33 Table A.57 Abort APDU . 33 Table A.58 AE title syntax name-form 33 Table A.59 Authentication value form . 33 Table A.60 Presentation PRL . 34 Table A.61 Session PRL 35 BS EN 60870-6-702:2014IEC 60870-6-702:2014

37、IEC 2014 7 INTRODUCTION This part of IEC 60870 is one of the IEC 60870-6 series defining functional profiles to be used in telecommunication networks for electric power systems. It is largely based on existing ISO/IEC International Standards and International Standardized Profiles (ISP). The notion

38、of functional profiles is fundamental in the organization of the IEC 60870-6 series. A description of functional profiles, their classification scheme and the manner of defining them are laid down in IEC 60870-6-1. This profile for telecontrol application service element (TASE.2, also known as inter

39、-control centre communications protocol, ICCP) is an application-class profile (A-profile) providing communications capabilities to control centre applications. The TASE.2 in the application layer is specified in IEC 60870-6-503. The present standard refines the application layer protocol to meet in

40、teroperability requirements and specifies requirements on the presentation and session layers support for TASE.2. TASE.2 operates in a connection mode, so this A-profile needs to interface to a transport-class profile of the T-profile variety. Since the TASE.2 is an MMS-based protocol, this function

41、al profile (FP) is based on MMS profiles. In the OSI international standardized profile taxonomy there is a category for MMS A-profiles. The present standard makes frequent use of the AMM11 profile. BS EN 60870-6-702:2014 8 IEC 60870-6-702:2014 IEC 2014 TELECONTROL EQUIPMENT AND SYSTEMS Part 6-702:

42、Telecontrol protocols compatible with ISO standards and ITU-T recommendations Functional profile for providing the TASE.2 application service in end systems 1 Scope This part of IEC 60870 is a functional profile (FP) and defines the provision of the TASE.2 communications services between two control

43、 centre end systems. It is supported by the transport services implemented in accordance with transport-profiles defined for the type of network that interconnects the control centre end systems. This is demonstrated in Figure 1. This FP also defines the provision of the OSI connection-mode presenta

44、tion and session services between the end systems. ISO/ISP 14226 specifies the AMM11 profiles for MMS. The parts of ISO/ISP 14226 that cover the profile that are used as a basis for this FP are ISO/ISP 14226-1 and ISO/ISP 14226-2. This FP is in alignment with ISO/ISP 14226, as far as possible, and m

45、aintains this compatibility by reference. There are TASE.2 requirements in addition to ISO/ISP 14226. These requirements are specified in this FP. TASE.2/MMS Presentation protocol Session protocol Control centre applications Control centre applications Session Presentation Application Session 4 3 2

46、1 4 3 2 1 Presentation Application IEC 2021/14 Figure 1 Applicability of functional profile 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies

47、. For BS EN 60870-6-702:2014IEC 60870-6-702:2014 IEC 2014 9 undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60870-6-503, Telecontrol equipment and systems Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendatio

48、ns TASE.2 Services and protocol IEC/TS 62351-4, Power systems management and associated information exchange Data and communications security Part 4: Profiles including MMS ISO/IEC 8327-2, Information technology Open Systems Interconnection Connection-oriented Session protocol: Protocol Implementati

49、on Conformance Statement (PICS) proforma ISO/IEC 8650-2, Information technology Open Systems Interconnection Protocol specification for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) proforma ISO/IEC 8823-2, Information technology Open Systems Interconnection Connection-oriented presentation protocol: Protocol Implem