EN 60893-1-2004 en Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1 Definitions designations and general requir.pdf

1、BRITISH STANDARD BS EN 60893-1:2004 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements The European Standard EN 60893-1:2004 has the status of a British Standard ICS 29.035.01 BS EN 6

2、0893-1:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 12 May 2004 BSI 12 May 2004 ISBN 0 580 43773 6 National foreword This British Standard is the official English language version of EN 60893-1:2004. It is identical with IEC 60893-1:2

3、004. It supersedes BS EN 60893-1:1995 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: A list of organizations represented on this subcommi

4、ttee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “S

5、earch” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal

6、 obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Sum

7、mary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD E

8、N 60893-1 NORME EUROPENNE EUROPISCHE NORM March 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights o

9、f exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60893-1:2004 E ICS 29.035.01 Supersedes EN 60893-1:1994English version Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, d

10、esignations and general requirements (IEC 60893-1:2004) Matriaux isolants - Stratifis industriels rigides en planches base de rsines thermodurcissables usages lectriques Partie 1: Dfinitions, dsignations et exigences gnrales (CEI 60893-1:2004) Isolierstoffe - Tafeln aus technischen Schichtpressstoff

11、en auf der Basis warmhrtender Harze fr elektrotechnische Zwecke Teil 1: Definitionen, Bezeichnungen und allgemeine Anforderungen (IEC 60893-1:2004) This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipul

12、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard

13、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national

14、electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdo

15、m. Foreword The text of document 15C/1542/FDIS, future edition 2 of IEC 60893-1, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60893-1 on 2004-03-01. This European Standard supersedes EN 60893-

16、1:1994. The major changes from EN 60893-1:1994 are the following: a) new material types have been included; b) changes have been made to the property requirements of some existing types; c) a new method for testing permittivity and dissipation factor has been added; d) all non-specification data for

17、 each type has been moved to a new Part 4 document IEC/TR 60893-4: Typical values. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-12-01 latest date by which the national

18、 standards conflicting with the EN have to be withdrawn (dow) 2007-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60893-1:2004 was approved by CENELEC as a European Standard without any modification. _ Page2 EN608931:2004INTRODUCTION This pa

19、rt of IEC 60893 is one of a series which deals with industrial rigid laminated sheets based on thermosetting resins for electrical purposes. The series consists of four parts: Part 1: Definitions, designations and general requirements (IEC 60893-1) Part 2: Methods of test (IEC 60893-2) Part 3: Speci

20、fications for individual materials (IEC 60893-3) Part 4: Typical values (IEC 60893-4) IEC 60893-1 specifies definitions, designations and general requirements used in this standard. Page3 EN608931:2004INSULATING MATERIALS INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL

21、 PURPOSES Part 1: Definitions, designations and general requirements 1 Scope This part of IEC 60893 contains the definitions related to, and the general requirements to be fulfilled by, industrial rigid laminated sheets for electrical purposes, made with any of the following resins as the binder: ep

22、oxy (epoxide), melamine, phenolic, polyimide, silicone and unsaturated polyester. The following reinforcements may be used either singly or in combination; cellulosic paper, cotton cloth, glass cloth, glass roving, glass mat, polyester cloth and wood veneers. Materials which conform to this specific

23、ation meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. 2 Normative references The following re

24、ferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60893-2, Industrial rigid laminated sheets based on thermoset

25、ting resins for electrical purposes Part 2: Methods of test IEC 60893-3 (all parts), Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials IEC 60893-4, Insulating materials Industrial rigid laminat

26、ed sheets based on thermosetting resins for electrical purposes Part 4: Typical values 3 Definitions For the purposes of this document, the following definitions, based on ISO 472, are applicable. 3.1 industrial rigid laminated sheets sheets based on thermosetting resins consisting of superimposed l

27、ayers of reinforcement that have been impregnated with thermosetting resin and bonded together under heat and pressure to form a single piece NOTE Other constituents, for example colouring matter, may be incorporated. Page4 EN608931:20043.2 epoxy resin epoxide resin synthetic resin containing epoxid

28、e groups, which is formulated to enable cross-linking 3.3 melamine resin amino resin made by polycondensation of melamine with formaldehyde or another compound that is capable of providing methylene bridges 3.4 phenolic resin generic term for a class of resins made by the polycondensation of phenol,

29、 its homologues and/or derivatives, with formaldehyde 3.5 unsaturated polyester resin polymer consisting of chains with repeated structural units of the ester type with carbon-carbon unsaturation, which permits subsequent cross-linking with an unsaturated monomer or pre- polymer 3.6 silicone resin r

30、esin in which the main polymer chain consists of alternating silicon and oxygen atoms, with side groups containing carbon atoms, which is formulated to enable cross-linking 3.7 polyimide resin synthetic resin obtained by polycondensation of aromatic diamines and aromatic dianhydrides 4 Designation T

31、he sheets covered by this standard are classified into types, which differ in the resin and reinforcement employed and in their distinguishing properties. The sheets are designated by: the IEC standard number; a two-letter abbreviation denoting the resin; a second two-letter abbreviation, denoting t

32、he reinforcement; a serial number; nominal thickness width length, in mm. Example of designation: Industrial rigid laminated sheet - PF CP 201 with a nominal thickness of 10 mm, 500 mm wide, 1 000 mm long. Page5 EN608931:2004Sheet IEC 60893-3-4 PF CP 201 - 10 500 1 000 Types of resin Types of reinfo

33、rcement EP Epoxy (epoxide) CC Woven cotton cloth MF Melamine CP Cellulosic paper PF Phenolic GC Woven glass cloth UP Unsaturated polyester GM Glass mat SI Silicone PC Woven polyester fibre cloth PI Polyimide WV Wood veneers CR Combination reinforcement NOTE 1 Designation CR (combination reinforcemen

34、t) is used for those laminates containing more than one type of reinforcement. The actual composition is given in the appropriate Part 3 specification sheet. NOTE 2 Table 1 of IEC 60893-3-1 lists the combinations of resins and reinforcements that constitute types covered by this standard. 5 General

35、requirements All material in any one consignment shall have properties within the limits of this standard. 5.1 Appearance The laminates shall be free from blisters, wrinkles and cracks, and reasonably free from other defects, for example scratches, dents, ripples and discoloration. A small amount of

36、 mottle is permissible. 5.2 Sheet sizes Sheet sizes are determined by agreement between purchaser and supplier. Sheets shall be supplied in the trimmed condition, unless otherwise specified in the relevant Part 3 specification or as agreed between purchaser and supplier. 5.3 Thickness The nominal th

37、ickness shall be one of the preferred thicknesses given in Table 1, unless otherwise agreed between purchaser and supplier. The deviation from the nominal thickness of a sheet measured according to IEC 60893-2, shall not exceed the appropriate value specified in Part 3. 6 Conditions of supply The ma

38、terial shall be supplied in a packing material that ensures adequate protection during transport, handling and storage. The IEC designation of the material and the number of sheets or the mass shall be clearly marked on the outside of each package. Where different types of sheets are contained in th

39、e same package, the required information may be on a note accompanying the package. Any marking on individual sheets shall be as specified in the purchase contract. Where marking is carried out with a stamp, the stamping ink used shall not impair the electrical properties of the material. Page6 EN60

40、8931:2004Table 1 Preferred nominal thickness Type of laminated sheet Preferred nominal thickness mm All types 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5; 3,0; 4,0; 5,0; 6,0; 8,0; 10,0; 12,0; 14,0; 16,0; 20,0; 25,0; 30,0; 35,0; 40,0; 45,0; 50,0; 60,0; 70,0; 80,0; 90,0; 100,0 Page7 EN608931:2004Annex

41、 ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

42、n of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60893-2 - 1)Industrial rigid laminated sheets based on thermosettin

43、g resins for electrical purposes Part 2: Methods of test - - IEC 60893-3 Series Part 3: Specifications for individual materials EN 60893-3 Series IEC/TR 60893-4 - 1)Part 4: Typical values - - 1)Undated reference. Page8 EN608931:2004Bibliography IEC 60893-3-1, Insulating materials Industrial rigid la

44、minated sheets based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials Requirements for types of industrial rigid laminated sheets ISO 472:1998, Plastics Vocabulary _ Page9 EN608931:2004BS EN 60893-1:2004 BSI 389 Chiswick High Road London W4 4AL BSI Br

45、itish Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of

46、 British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary o

47、f the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards

48、. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for inte

49、rnational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic