EN 60966-3-1-2009 en Radio frequency and coaxial cable assemblies - Part 3-1 Blank detail specification for semi-flexible coaxial cable assemblies《射频和同轴电缆组件 第3-1部分 半柔性同轴电缆组件空白详细规范》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Radio frequency and coaxialcable assemblies Part 3-1: Blank detail specification for semi-flexiblecoaxial cable a

2、ssembliesBS EN 60966-3-1:2009National forewordThis British Standard is the UK implementation of EN 60966-3-1:2009. It isidentical to IEC 60966-3-1:2009. It supersedes BS EN 60966-3-1:2003 whichis withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeEPL/46, Cables, wi

3、res and waveguides, radio frequency connectors and acces-sories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsi

4、ble for its correct application. BSI 2009ISBN 978 0 580 61645 7ICS 33.120.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 May 2009Amendments issued since publ

5、icationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60966-3-1:2009EUROPEAN STANDARD EN 60966-3-1 NORME EUROPENNE EUROPISCHE NORM April 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Nor

6、mung Central Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60966-3-1:2009 E ICS 33.120.10 Supersedes EN 60966-3-1:2003English version Radio frequency and coaxial cable assemb

7、lies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:2009) Ensembles de cordons coaxiaux et de cordons pour frquences radiolectriques - Partie 3-1: Spcification particulire cadre pour cordons coaxiaux semi-flexibles (CEI 60966-3-1:2009) Konfektioniert

8、e Koaxial- und Hochfrequenzkabel - Teil 3-1: Vordruck fr Bauartspezifikation fr halbflexible konfektionierte Koaxialkabel (IEC 60966-3-1:2009) This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

9、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exis

10、ts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national elect

11、rotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

12、land and the United Kingdom. BS EN 60966-3-1:2009EN 60966-3-1:2009 - 2 - Foreword The text of document 46/306/FDIS, future edition 3 of IEC 60966-3-1, prepared by IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CE

13、NELEC parallel vote and was approved by CENELEC as EN 60966-3-1 on 2009-02-01. This European Standard supersedes EN 60966-3-1:2003. The major change with respect to EN 60966-3-1:2003 is the reference to the sectional specification EN 60966-3:2009. This blank detail specification is to be read in con

14、junction with EN 60966-1:1999 and with EN 60966-3:2009. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-11-01 latest date by which the national standards conflicting with

15、 the EN have to be withdrawn (dow) 2012-02-01 _ Endorsement notice The text of the International Standard IEC 60966-3-1:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Reference documents, the following note has to be added for the standard

16、indicated: IEC 60068 NOTE Harmonized in EN 60068 series (not modified). _ BS EN 60966-3-1:2009 4 60966-3-1 IEC:2009(E) INTRODUCTION This part of IEC 60966 is a blank detail specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). Th

17、e creation of a uniform layout and style of a detail specification is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by the insertion of data into the pro forma by a national standards organization, by an approved manufacturer or by a user (

18、when prepared by a user, the detail specification shall be submitted to the national authorized institution by an approved manufacturer). Instructions to complete a blank detail specification: Detail specifications should, as far as possible, be written in accordance with the pro forma which has: a

19、front page with a general description and a drawing or isometric sketch of the cable assembly and its possible variants; ratings, characteristics and inspection requirements (those which are not required or specified shall be omitted). Under quality assessment, tests are divided into groups. Wheneve

20、r possible, entire groups are either specified or omitted. These groups are: Ba (basic) Visual and dimensional tests Eb (electrical basic) Low-frequency operational tests Eh (electrical high frequency) High-frequency tests Ep (electrical phase) Electrical length tests Ee (electrical screening effect

21、iveness) Screening effectiveness tests Ez (electrical impedance Z) Impedance uniformity tests Et (electrical transmission) Power rating test Mn (mechanical) Mechanical tests Vc (environmental climatic) Climatic tests Vv (environmental vibration) Vibration, bumps and shock tests Vt (environmental tem

22、perature) Humidity, rapid change of temperature and chemical tests Vf (environmental flammability) Flammability, dust and water immersion tests BS EN 60966-3-1:200960966-3-1 IEC:2009(E) 5 The numbers shown in brackets on this page correspond to the following items of required information, which shou

23、ld be entered in the spaces provided. 1 Name and address of the organization that has prepared the document. 2 IEC document number, issue number and date of issue. 3 Address of the organization from which the document is available. 4 Related documents. 5 Any other reference to the cable assembly, na

24、tional reference, trade name, etc. 6 A drawing of the cable assembly giving the outline and principal dimensions. The dimensions are considered to be in millimetres unless otherwise specified. NOTE The symbol “l“ may be used to specify the cable length. In this case, the detail specification covers

25、cable assemblies of any length and “l“ should then be specified in the order. 7 Nominal characteristic impedance of the cable assembly. 8 Frequency range of use of the cable assembly (DC may be used as a lower limit of frequency, indicating that the cable assembly is capable of transmitting d.c., bu

26、t at d.c. a number of characteristics may neither apply nor be verified by inspection.) 9 Weight, function of the length of the cable assembly. 10 Minimum static inside bending radius of the cable assembly. Also minimum dynamic inside bending radius of the cable assembly, i.e. the bending radius use

27、d for the insertion loss and stability of electrical length tests. 11 Climatic category of the cable assembly related to IEC 60068. 12 The applicable quality assessment test groups according to Table 1 of the sectional specification (for example, Ba, Eh, Eb). 13 Description, of the components used f

28、or the manufacture of the cable assembly. When the components do not conform with the relevant publication(s), their relevant materials requirements shall be listed. 14 Variants of the cable assembly may be listed in one detail specification. The variants may differ by colour, connector material, co

29、nnector sex or type. (Inspection for quality conformance will be the same for all variants whereas the ratings and characteristics can change.) 15 Number of pages of the blank detail specification including the annexes. 16 Ratings and characteristics of the cable assembly. The properties not specifi

30、ed should be omitted. 17 Reference to the appropriate subclause in the sectional and generic specifications. 18 The value either guaranteed or used for the defined test. 19 All information required by the sectional specification and any remarks considered as important for understanding the test. 20

31、Test groups (corresponding to box 12 on page 1 of the blank detail specification). 21 Name of test and its subclause number in the sectional and generic specifications. 22 Periodicity of the test. The periodic tests apply only in the case of qualification approval. 23 Inspection level selected from

32、IEC 60410. BS EN 60966-3-1:2009 6 60966-3-1 IEC:2009(E) 24 Acceptable quality level selected from IEC 60410. 25 Sample size. 26 Acceptance criteria. 27 Test specimen length should be specified if the length is different from that given in box 6 on page 1 of the blank detail specification or if the l

33、ength in box 6 is left free with the parameter “l“. Reference documents IEC 60068 (all parts), Environmental testing IEC 60410, Sampling plans and procedures for inspection by attributes BS EN 60966-3-1:200960966-3-1 IEC:2009(E) 7 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 3-1: Blank detail s

34、pecification for semi-flexible coaxial cable assemblies 1 Prepared by: 2 Document No.: Issue: Date: 3 Available from: 4 Generic specification: IEC 60966-1 Sectional specification: IEC 60966-3 Blank detail specification: IEC 60966-3-1 5 Additional references: Detail specification for a semi-flexible

35、coaxial cable assembly NOTE Example diagram, manufacturer to insert actual diagram 6 7 Characteristic impedance: 8 Frequency range: to GHz 9 Weight: g+ g/m 10 Minimum inside radius for static bending: mm for dynamic bending: mm 11 Climatic category: / 12 Applicable test groups: Ba, Eh, Eb, Ez, Ep, E

36、e, Mn, Vv, Vc, Vt, Vf. 13 Connector reference number Series type sex of the connector Reference no. type of the cable Additional armour Marking method Marking text 14 Variants: 15 Page 1 of 7 pages BS EN 60966-3-1:2009 8 60966-3-1 IEC:2009(E) 16 17 18 19 Inspection values, ratings or characteristics

37、 SubclauseaValue Remarks Electrical* Reflection properties 8.1 dB to GHz From one or two ends Uniformity of impedance 8.2 . . Rise time of pulse ps Insertion loss 8.3 . dB . dB/m to GHz Propagation time 8.5 . ns . ns/m Frequency or rise time Stability of electrical length 8.6 /GHz to GHz mandrel rad

38、ius Test method 1 or 2 for bending test Phase difference 8.7 + . /GHz Frequency Phase variation with temperature 8.8 . /GHz to K to GHz Screening effectiveness 8.9 . dB to MHz Voltage proof 8.10 . kV Insulation resistance 8.11 . M Test voltage V Inner and outer conductor continuity 8.12 OK/no Voltag

39、e Current Frequency Power rating 8.14 . W Mechanical* Tensile 9.1 Interface OK/no Force N Duration s Return loss dB Cable assembly crushing 9.4 Interface OK/no Force N Return loss dB Torque 9.5 Interface OK/no Nm Return loss Multiple bending 9.6 Interface OK/no Cycle Return loss dB BS EN 60966-3-1:2

40、00960966-3-1 IEC:2009(E) 9 16 17 18 19 Inspection values, ratings or characteristics SubclauseaValue Remarks Environmental* Vibration 10.2 OK/no m/s2 to Hz g (see also 10.2.1.3) Bumps 10.2 OK/no m/s2 g Shock 10.2 OK/no m/s2 sine ns g Climatic sequence 10.3 ././. Cycles (connectors (un-)mated Tests:

41、7.2, 8.3, 8.10, 8.11 Damp heat, steady state 10.4 OK/no Cycles Days (connectors (un-)mated Tests: Rapid change of temperature 10.5 OK/no K/+ K Cycles Tests: 7.2, 8.3, 8.10, 8.11 Solvents and contaminating fluids 10.6 OK/no Cycles (connectors (un-) mated Tests: 7.2, 8.3, 8.11 Water immersion 10.7 OK/

42、no Salt mist and sulphur dioxide 10.8 OK/no Dust tests 10.9 OK/no Flammability 10.10 OK/no * If appropriate, values may be given for each variant. a The relevant standard could be the generic, the sectional or both of them.BS EN 60966-3-1:2009 10 60966-3-1 IEC:2009(E) Grouping of tests for specifica

43、tion purposes Recommended grouping of tests Recommended severities 20 21 22 23 24 25 26 Group SubclauseaTests Periodicity IL AQL n c 27 Specimen length 7.2 Visual inspection Ba 7.3 Dimensional inspection 8.1 Reflection properties Eh 8.3 Insertion loss 8.10 Voltage proof 8.11 Insulation resistance Eb

44、 8.12 Inner and outer conductor continuity Ez 8.2 Uniformity of impedance 8.5 Propagation time 8.6 Stability of electrical length 8.7 Phase difference Ep 8.8 Phase variation with temperature Ee 8.9 Screening effectiveness Et 8.14 Power rating 9.1 Tensile 9.4 Cable assembly crushing 9.5 Torque Mn 9.6

45、 Multiple bending Vv 10.2 Vibration, bumps and shock Vc 10.3 Climatic sequence 10.4 Damp heat, steady state 10.5 Rapid change of temperature Vt 10.8 Salt mist and sulphur dioxide 10.7 Water immersion Vf 10.9 Dust tests 10.10 Flammability The periodic tests above apply only in the case of qualificati

46、on approval. In the case of capability approval, the tests may be performed on the applicable CQCs (capability qualification components) instead. a The relevant standard could be the generic, the sectional or both of them. _ BS EN 60966-3-1:2009This page deliberately left blankThis page deliberately

47、 left blankBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chis

48、wick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products andservices. We would be grateful if an