EN 60974-10-2014 en Arc welding equipment - Part 10 Electromagnetic compatibility (EMC) requirements (Incorporates Amendment 2015).pdf

1、BSI Standards PublicationArc welding equipmentPart 10: Electromagnetic compatibility (EMC) requirementsBS EN 60974-10:2014BS EN 60974-10:2014+A1:2015BS EN 60974-10:2014+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60974-10:2014+A1:2015. It is identica

2、l to IEC 60974-10:2014 incorporating amendment 1:2015. It supersedes BS EN 60974-10:2014 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text a

3、ltered by IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee WEE/6, Electric arc welding equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include

4、 all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86531 2ICS 25.160.30Compliance with a British Standard cannot confer immunity from legal obligations.This Brit

5、ish Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2014.Amendments/corrigenda issued since publicationDate Text affected31 August 2015 Implementation of IEC amendment 1:2015 with CENELEC endorsement A1:2015EUROPEAN STANDARDNORME EUROPENNEEUR

6、OPISCHE NORMEN 60974-10 August 2014 ICS 25.160 Supersedes EN 60974-10:2007 English Version Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2014) Matriel de soudage larc - Partie 10: Exigences decompatibilit lectromagntique (CEM) (CEI 60974-10:2014) Lic

7、htbogenschweieinrichtungen - Teil 10: Anforderungenan die elektromagnetische Vertrglichkeit (EMV) (IEC 60974-10:2014) This European Standard was approved by CENELEC on 2014-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

8、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three off

9、icial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotech

10、nical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,

11、Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014

12、CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60974-10:2014 E EN 60974-10:2014+A1August 2015EN 60974-10:2014 - 2 - Foreword The text of document 26/519/FDIS, future edition 3 of IEC 60974-10, prepared by IEC/TC 26 “Electric weldin

13、g“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60974-10:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-02-28 latest date by w

14、hich the national standards conflicting with the document have to be withdrawn (dow) 2017-03-13 This document supersedes EN 60974-10:2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held respon

15、sible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive see informative Annex

16、ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60974-10:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indic

17、ated: IEC 60974-9 NOTE Harmonized as EN 60974-9. CISPR 14-1 NOTE Harmonized as EN 55014-1. BS EN 60974-10:2014 2 BS EN 60974-10:2014+A1:2015EN 60974-10:2014+A1:2015EN 60974-10:2014 - 2 - Foreword The text of document 26/519/FDIS, future edition 3 of IEC 60974-10, prepared by IEC/TC 26 “Electric weld

18、ing“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60974-10:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-02-28 latest date by

19、 which the national standards conflicting with the document have to be withdrawn (dow) 2017-03-13 This document supersedes EN 60974-10:2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held resp

20、onsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive see informative Anne

21、x ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60974-10:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards ind

22、icated: IEC 60974-9 NOTE Harmonized as EN 60974-9. CISPR 14-1 NOTE Harmonized as EN 55014-1. BS EN 60974-10:2014 3 BS EN 60974-10:2014+A1:2015EN 60974-10:2014+A1:2015EN 60974-10:2014/A1:2015 2 European Foreword The text of document 26/549/CDV, future IEC 60974-10/A1, prepared by IEC/TC 26 “Electric

23、welding“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60974-10:2014/A1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-24 la

24、test date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or

25、all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive see informative Annex ZZ, included in EN 60974-10:2

26、014. Endorsement notice The text of the International Standard IEC 60974-10:2014/AMD 1:2015 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A1- 3 - EN 60974-10:2014 Annex ZA (normative) Normative references to international publications with their corre

27、sponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a

28、ny amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publicatio

29、n Year Title EN/HD Year IEC 60050 Series International Electrotechnical Vocabulary - IEC 60974-1 - Arc welding equipment - Part 1: Welding power sources EN 60974-1 - IEC 60974-6 - Arc welding equipment - Part 6: Limited duty equipment EN 60974-6 - IEC 61000-3-2 A1 A2 2005 1)2008 1)2009 1)Electromagn

30、etic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) EN 61000-3-2 A1 A2 2006 2)2009 2)2009 2)IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and fli

31、cker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection EN 61000-3-3 2013 IEC 61000-3-11 2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in publ

32、ic low-voltage supply systems - Equipment with rated current 75 A and subject to conditional connection EN 61000-3-11 2000 IEC 61000-3-12 2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with inp

33、ut current 16 A and 75 A per phase EN 61000-3-12 2011 IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 - 1)Superseded by IEC 61000-3-2:2014. 2)Superseded by EN 61000-3-2:2014 (IEC 61000-3-2:2014).

34、BS EN 60974-10:2014 4 BS EN 60974-10:2014+A1:2015EN 60974-10:2014+A1:2015- 3 - EN 60974-10:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this docu

35、ment and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicate

36、d by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60050 Series International Electrotechnical Vocabulary - IEC 60974-1 - Arc welding equip

37、ment - Part 1: Welding power sources EN 60974-1 - IEC 60974-6 - Arc welding equipment - Part 6: Limited duty equipment EN 60974-6 - IEC 61000-3-2 A1 A2 2005 1)2008 1)2009 1)Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A pe

38、r phase) EN 61000-3-2 A1 A2 2006 2)2009 2)2009 2)IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to condit

39、ional connection EN 61000-3-3 2013 IEC 61000-3-11 2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current 75 A and subject to conditional connection EN 61000-3-1

40、1 2000 IEC 61000-3-12 2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase EN 61000-3-12 2011 IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2

41、: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 - 1)Superseded by IEC 61000-3-2:2014. 2)Superseded by EN 61000-3-2:2014 (IEC 61000-3-2:2014). BS EN 60974-10:2014EN 60974-10:2014 - 4 - Publication Year Title EN/HD Year IEC 61000-4-3 - Electromagnetic compatib

42、ility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 - IEC 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 -

43、 IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 - IEC 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency

44、 fields EN 61000-4-6 - IEC 61000-4-11 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-4-11 - IEC 61000-4-34 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurem

45、ent techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase EN 61000-4-34 - CISPR 11 (mod) A1 2009 2010 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and metho

46、ds of measurement EN 55011 A1 2009 2010 CISPR 16-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus EN 55016-1-1 - CISPR 16-1-2 - Specification for radio disturbance and immunity

47、measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements EN 55016-1-2 - CISPR 16-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and im

48、munity measuring apparatus - Antennas and test sites for radiated disturbance measurements EN 55016-1-4 - BS EN 60974-10:2014 5 BS EN 60974-10:2014+A1:2015EN 60974-10:2014+A1:2015- 5 - EN 60974-10:2014 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives This European Standard

49、has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers only essential requirements as given in Article 5 of the EU Directive 2004/108/EC and in Articles 1 a) and 1 b) of Annex I. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements in other EU Directives may be applicable to the products fal