EN 61029-2-6-2010 en Safety of transportable motor-operated electric tools - Part 2-6 Particular requirements for diamond drills with water supply (Remains Current)《移动式电动工具的安全性 第2-.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationSafety of transportable motor-operated electric toolsPart 2-6: Particular requirements for diamond drills with water supplyBS EN 61029-2-6:2010National forewordThis British Stand

2、ard is the UK implementation of EN 61029-2-6:2010. It wasderived by CENELEC from IEC 61029-2-6:1993.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical Commit

3、teeCPL/116, Portable motor-operated tools.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580

4、 53061 6ICS 25.080.40; 25.140.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 August 2010.Amendments/corrigenda issued since publicationDate Text affectedBRIT

5、ISH STANDARDBS EN 61029-2-6:2010EUROPEAN STANDARD EN 61029-2-6 NORME EUROPENNE EUROPISCHE NORM April 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix

6、17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61029-2-6:2010 E ICS 25.140.20 English version Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills

7、 with water supply (IEC 61029-2-6:1993, modified) Scurit des machines-outils lectriques semi-fixes - Partie 2-6: Rgles particulires pour les foreuses bton (CEI 61029-2-6:1993, modifie) Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-6: Besondere Anforderungen fr Diamantbohrmasch

8、inen mit Wasserversorgung (IEC 61029-2-6:1993, modifiziert) This European Standard was approved by CENELEC on 2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w

9、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lan

10、guage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Re

11、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 61029-2-6:2010 - 2 - Foreword The text of

12、the International Standard IEC 61029-2-6:1993, SC 61F, Safety of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances, together with the common modifications prepared by the Technical Committee CENELEC TC 116, former TC 61F, Hand-held electric

13、motor-operated tools, was submitted to the CENELEC formal vote and was accepted as EN 61029-2-6 on 2010-04-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or al

14、l such patent rights. The following dates are proposed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (do

15、w) 2013-04-01 This European Standard is divided into two parts: Part 1 General requirements, which are common to most transportable motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard. Part 2 Requirements for particul

16、ar types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the European Free Trade

17、Association and supports the essential health and safety requirements of EC Directive 2006/42/EC. See Annex ZZ. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive. For noise and vibration

18、 this standard covers the requirements for their measurement, the provision of information arising from these measurements and the provision of information about the Personal Protective Equipment required. Specific requirements for the reduction of the risk arising from noise and vibration through t

19、he design of the tool are not given as this reflects the current state of the art. Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this standard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2 CEN

20、have prepared standards for industrial machines, which may extend to transportable machines. Although CEN and CENELEC have where appropriate used common solutions to provide uniform levels of protection, persons using this standard should check the scope of both this and CEN standards to ensure that

21、 a correct standard is used. EN 61029-2-6 is to be used in conjunction with EN 61029-1:2009 EN 61029-2-6 supplements or modifies the corresponding clauses of EN 61029-1, so as to convert it into the European Standard: Safety requirements for transportable diamond drills with water supply. BS EN 6102

22、9-2-6:2010- 3 - EN 61029-2-6:2010 Where a particular subclause is not mentioned in this Part 2-6, that subclause applies as far as reasonable. Where this Part 2-6 states “addition” “modification” or “replacement”, the relevant text of Part 1 is to be adapted accordingly. Subclauses, tables and figur

23、es which are additional to those in Part 1 are numbered starting from 101. Subclauses, table and figures which are additional to those in IEC 61029-2-6 are prefixed “Z”. NOTE In this European Standard, the following print types are used: - Requirements proper; - Test specifications;- Explanation mat

24、ter. BS EN 61029-2-6:2010- 4 - Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all r

25、elevant Essential Requirements as given in EC Directive 2006/42/EC (Machinery Directive), except the following: Essential Requirement 2.2.11 Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requiremen

26、ts and other EC Directives may be applicable to the products falling within the scope of this standard. EN 61029-2-6:2010BS EN 61029-2-6:2010Contents 1 Scope . 7 2 Definitions 7 3 General requirement . 7 4 General notes on tests . 7 5 Rating 7 6 Classification 7 7 Marking and information for use .8

27、8 Protection against electric shock 9 9 Starting 9 10 Input and current 911 Heating 9 12 Leakage current .9 13 Environmental requirements . 914 Protection against ingress of foreign bodies and moisture resistance . 10 15 Insulation resistance and electric strength 10 16 Endurance 10 17 Abnormal oper

28、ation 11 18 Stability and mechanical hazards .11 19 Mechanical strength . 12 20 Construction . 12 21 Internal wiring . 12 22 Components . 12 23 Supply connection and external flexible cables and cords . 12 24 Terminals for external conductor. . 13 25 Provision for earthling 13 26 Screws and connecti

29、ons . 13 27 Creepage distances, clearances and distances through insulation 13 28 Resistance to heat, fire and tracking . 13 29 Resistance to rusting 13 30 Radiation 13 Bibliography . 16 Annexes . 16- 5 - EN 61029-2-6:2010 BS EN 61029-2-6:2010- 6 - EN 61029-2-6:2010BS EN 61029-2-6:2010SAFETY OF TRAN

30、SPORTABLE MOTOR-OPERATED ELECTROC TOOLSPart 2: Particular requirements for diamond drills with water supply1 Scope This clause of part 1 is applicable except as follows: 1.1 Addition: This standard applies to transportable diamond drills manually fed, intended to be connected to a water supply (wate

31、r supply may include water source from a pipe or tank or vat). 2 Definitions This clause of Part 1 is applicable except as follows: 2.101 diamond drill tool with water supply designed to drill stone and concrete by means of diamond core-bits. The tool at least consists of a drill unit and a drill st

32、and to which it is fixed. The drill stand is attached to the material to be drilled by means of dowels, vacuum or other suitable devices (see Figure Z101) or it is secured to an appropriate support (like e.g. scaffolding) that, under working forces transmitted by the drill stand, is not subjected to

33、 a displacement with reference to the base material 2.102 water-collecting ring a device to collect water and stone-mud when drilling 2.103 drill unit the drill unit at least consists of a motor, gear unit and a fitting for the drill bit 2.104 pillar part of the drill stand to which the drill unit i

34、s fixed, and on which the drill unit slides during drilling 3 General requirement This clause of part 1 is applicable. 4 General notes on tests This clause of part 1 is applicable. 5 Rating This clause of part 1 is applicable. 6 Classification This clause of part 1 is applicable. - 7 - EN 61029-2-6:

35、2010 BS EN 61029-2-6:2010EN 61029-2-6:2010 - 8 - 7 Marking This clause of part 1 is applicable except as follows: 7.1 Addition: Diamond drills with water supply shall be marked with: Rated no-load speed in revolutions per minute Maximum diameter, in millimetres, of the bit for drilling Read instruct

36、ion manual or relevant symbol 7.13 Addition: The instruction handbook shall contain at least a repeat of the warnings affixed to the tool. Furthermore, it shall contain warnings against the following hazards and/or hazardous situations and related instructions for safe use: c) Safety precautions Haz

37、ardous situation due to broken parts. Instruction shall be given to check core bits before using. Deformed or damaged drill core bits shall not be used; Use of non-recommended cutting tools, which can lead to injuries due to the loss of control. Instruction shall be given to use drill core bits desi

38、gned for this machine only and concerning the minimum and maximum diameter and length of those core bits. Incorrect clamping and positioning of the drill core bit may lead to dangerous situations by broken and ejected parts of the drill core bit. Instruction shall be given how the drill core bits sh

39、all be assembled and adjusted and which fastening torque (if applicable) is recommended; The necessity to always wear suitable personal protective equipment (PPE). Instruction shall describe PPE means such as; - Hearing protection, to reduce the risk of induced hearing loss, - Gloves, when handling

40、core bits or rough materials, to reduce injuries by sharp edges, - Safety glasses, to prevent injuries by flying particles, - Non-slipping footwear, to prevent injuries caused by slippery surfaces; Hazardous situation due to dust production when drilling without water supply. Instruction shall be gi

41、ven to use a dust extraction device, if any, and/or a dust mask. e) Safe operation A wrongly assembled machine may cause a hazardous situation. Instruction shall be given how to fix the machine into the stand and fixing to the material to be drilled; Fixing with vacuum devices can lead to dangerous

42、situations. Instruction to check the surface where the drill stand shall be fixed. Surface such as irregular (rough) can significantly reduce the effectiveness of the suction system. Coated or laminated surface can be pulled off during work; Instruction to additionally secure the drill stand in case

43、 of drilling horizontally or vertically up by using appropriate accessories or means. A description of the characteristics of these means and how to fit them to the drill system shall be given; Information regarding the minimum vacuum level necessary for safe operation and how to control it during t

44、he drilling operation; Information regarding the maximum core bit diameter suitable for use with vacuum fixing. BS EN 61029-2-6:2010- 9 - EN 61029-2-6:2010 Za) 3, 4 and 5 Replacement: Under consideration. 8 Protection against electric shock This clause of part 1 is applicable. 9 Starting This clause

45、 of part 1 is applicable. 10 Input and current This clause of part 1 is applicable. 11 Heating This clause of part 1 is applicable. 12 Leakage current This clause of part 1 is applicable. 13 Environmental requirements This clause of Part 1 is applicable except as follows: 13.1 This subclause is not

46、applicable. 13.2.1 Addition: The most important sources of noise from diamond drills are: the drill core bit; the gear; the motor and fan. NOTE For general information concerning the reduction of noise see EN ISO 11688-1. 13.2.4 Replacement Drills with water supply are tested under load in accordanc

47、e with Table Z101. BS EN 61029-2-6:2010EN 61029-2-6:2010 - 10 - Table Z101 - Noise test conditions Orientation Drilling vertically down into a concrete block having the formulation specified in Table Z102 and having the minimum dimensions 500 mm x 500 mm and 200 mm in height and supported on resilie

48、nt material. The concrete block, its support and the tool shall be so oriented that the geometric centre of the tool is approximately 1 m above the reflecting plane. The centre of the concrete block shall be located under the top microphone. The tool shall be fixed to the concrete block as described

49、 in accordance with 7.13. Tool bit Medium drill bit of diameter range and medium length of the range as described in accordance with 7.13 for drilling into concrete with a usable length of at least 100 mm. Feed force Using the respective feed force leading to the rated normal load of the tool. Test cycle Measurement starts when the drill bit has reached a depth of approximately 10 mm and stops when the depth has reached approximately 80 mm. Table Z102 - Concrete formulation (per cubic metre) Cement Water Aggreg