EN 61058-1-2-2016 en Switches for appliances - Part 1-2 Requirements for electronic switches.pdf

1、Switches for appliancesPart 1-2: Requirements for electronic switchesBS EN 61058-1-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 61058-1-2:2016. It isidentical to IEC 61058-1-2:2016.The UK

2、participation in its preparation was entrusted to TechnicalCommittee PEL/23, Electrical accessories.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are respo

3、nsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85301 2ICS 29.120.40Compliance with a British Standard cannot confer immunity fromlegal obligations.Amendments/corrigenda issued since publicationDate Text affectedBRITISH

4、 STANDARDBS EN 61058-1-2:2016This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2016.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61058-1-2 September 2016 ICS 29.120.40 English Version Switches for appliances - Part 1-2: Req

5、uirements for electronic switches (IEC 61058-1-2:2016) Interrupteurs pour appareils - Partie 1-2: Exigences relatives aux interrupteurs lectroniques (IEC 61058-1-2:2016) Gerteschalter - Teil 1-2: Anforderungen an elektronische Schalter (IEC 61058-1-2:2016) This European Standard was approved by CENE

6、LEC on 2016-06-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standar

7、ds may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

8、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G

9、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalis

10、ation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61058-1-2:2016 E BS EN 61058-1-2:2016EN 61

11、058-1-2:2016 2 European foreword The text of document 23J/400/FDIS, future edition 1 of IEC 61058-1-2, prepared by SC 23J “Switches for appliances“, of IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61058-1-2:2016. The following dates

12、are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-03-29 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-06-29 Attention is drawn

13、to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61058-1-2:2016 was approved by CENELEC as a

14、 European Standard without any modification. BS EN 61058-1-2:2016EN 61058-1-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and ar

15、e indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),

16、 the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Annex ZA of Part 1 is applicable. BS EN 61058-1-2:2016 2 IEC 61058-1-2:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative referen

17、ces. 6 3 Terms and definitions 6 4 General requirements 6 5 General information on tests 6 6 Rating . 8 7 Classification . 8 8 Marking and documentation . 8 9 Protection against electric shock 9 10 Provision for earthing . 9 11 Terminals and terminations 9 12 Construction 9 13 Mechanism 9 14 Protect

18、ion against ingress of solid foreign objects, ingress of water and humid conditions 9 15 Insulation resistance and dielectric strength . 9 16 Heating . 9 17 Endurance . 9 17.1 General requirements 10 17.2 Electrical conditions 13 17.3 Thermal conditions 15 17.4 Actuating conditions 15 17.5 Type of t

19、est condition (TC) 17 17.6 Evaluation of compliance . 18 18 Mechanical strength . 19 19 Screws, current-carrying parts and connections 19 20 Clearances, creepage distances, solid insulation and coatings of rigid printed board assemblies 19 21 Fire hazard 19 22 Resistance to rusting . 19 23 Abnormal

20、operation and fault conditions for switches 20 23.1 Switch construction . 20 23.2 Test set-up 20 23.3 Abnormal testing . 20 23.4 Compliance . 21 23.5 Protection in case of failure of forced cooling . 21 24 Components for switches . 21 25 EMC requirements . 21 Table 101 Test specimens 7 Table 102 Swi

21、tch information and the loads placed in groups 8 Table 103 Electrical endurance tests for electronic switches . 11 BS EN 61058-1-2:2016IEC 61058-1-2:2016 IEC 2016 3 Table 104 Test loads for electrical endurance tests for a.c. circuits . 14 Table 105 Test loads for electrical endurance tests for d.c.

22、 circuits . 15 Table 106 Switch operating conditions 16 BS EN 61058-1-2:2016 4 IEC 61058-1-2:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SWITCHES FOR APPLIANCES Part 1-2: Requirements for electronic switches FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide

23、 organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activi

24、ties, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject d

25、ealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determin

26、ed by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committee

27、s. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which the

28、y are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication a

29、nd the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not resp

30、onsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical co

31、mmittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publica

32、tions. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of pa

33、tent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61058-1-2 has been prepared by subcommittee 23J: Switches for appliances, of IEC technical committee 23: Electrical accessories. The text of this standard is based on the followin

34、g documents: FDIS Report on voting 23J/400/FDIS 23J/404/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in

35、the IEC 61058 series, published under the general title Switches for appliances, can be found on the IEC website. BS EN 61058-1-2:2016IEC 61058-1-2:2016 IEC 2016 5 This part of IEC 61058 is to be used in conjunction with IEC 61058-1(2016). This Part 1-2 supplements or modifies the corresponding clau

36、ses in IEC 61058-1, so as to convert that publication into the IEC standard: Requirements for electronic switches. When a particular subclause of Part 1 is not mentioned in this Part 1-2, that subclause applies as far as reasonable. Where this standard states “addition”, “modification” or “replaceme

37、nt”, the relevant text of Part 1 is to be adapted accordingly. In this standard: 1) the following print types are used: requirements proper: in roman type; test specifications: in italic type; notes/explanatory matters: in small roman type. 2) subclauses, notes, figures and tables which are addition

38、al to those in Part 1 are numbered starting from 101. Annexes which are additional to those in Part 1 are lettered AA, BB, etc. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in

39、 the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61058-1-2:2016 6 IEC 61058-1-2:2016 IEC 2016 SWITCHES FOR APPLIANCES Part 1-2: Requirements for electronic switches 1 Scope This clause of par

40、t 1 is applicable. Add the following at the end of Clause 1. This part of IEC 61058 applies to electronic switching devices and shall be used in conjunction with the general requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 6

41、1058. 2 Normative references This clause of part 1 is applicable. 3 Terms and definitions This clause of part 1 is applicable. 4 General requirements This clause of part 1 is applicable. 5 General information on tests This clause of part 1 is applicable with the following addition. Add the following

42、 at the end of 5.3. Table 101 provides information on: The minimum number of specimens needed for each test. The minimum number of total specimens, when applicable tests are added, needed for each evaluation. Additional specimens that may be required as a result of additional electrical rating, uniq

43、ue construction or damage /breakage during testing. BS EN 61058-1-2:2016IEC 61058-1-2:2016 IEC 2016 7 Table 101 Test specimens Clause Description Minimum number of specimens for each test a)Notes 5General information on tests i ii b) 6Rating 1 c) 7Classification 8Marking and documentation 9Protectio

44、n against electric shock 10Provision for earthing 11Terminals 12Construction 13Mechanism 14.1 Protection against ingress of solid foreign objects 1 d) 14.2 Protection against ingress of water 1 d) 14.3 to 15 Protection against humid conditions Insulation resistance and dielectric strength 3 e), m) 1

45、6Heating 3 3 f), m) 17Endurance 3 3 f), m) 18Mechanical strength 1 c) 19Screws, current-carrying parts and connections 1 c) 20Clearance, creepage distances 1 g), h) 21Fire hazard 2 i), c) 22Resistance to rusting 1 c) 23Abnormal operation and fault conditions for switches 1 l) 24Components for switch

46、es 3 j) 25EMC requirements 1 k) a)Additional specimens may be required depending on the construction and declaration of the switch. b)Each electrical rating submitted to the testing of Clauses 16 and 17 requires an additional 3 specimens (such as rating i = 3 specimens, rating ii = additional 3 spec

47、imens). c)The specimen may be used for more than 1 test, if cumulative stress as a result of sequential testing is avoided. When a specimen is damaged a new specimen shall be used for the next test. d)In general 1 specimen for ingress of solid foreign objects (dust), and 1 specimen for ingress of wa

48、ter. Specific IP ratings (such as IP5x, IP6x and protection against water) require a special enclosure to be provided with the switch specimen in order to complete the testing. e)The same test specimens are used to complete the testing of 14.3 and 15. The test are completed in immediate sequence. f)

49、Heating and endurance is recommended to be tested on the same specimens. If declared, separate specimens may be used when noted on the test record. g)Three additional new specimens may be required according to Clause 20, for the test according to annex G. h)For testing coatings on printed boards according to 20.4, the number of printed boards needed is determined by the testing of IEC 60664-3. i)For testing glow wire and ball pressure special test specimens according to