EN 61058-2-6-2016 en Switches for appliances - Part 2-6 Particular requirements for switches used in electric motor-operated hand-held tools transportable tools and lawn and garden.pdf

1、Switches for appliancesPart 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machineryBS EN 61058-2-6:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British S

2、tandard is the UK implementation of EN 61058-2-6:2016. It isidentical to IEC 61058-2-6:2016.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/23, Electrical accessories.A list of organizations represented on this committee can be obtained onrequest to its secretary.This

3、 publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 89969 0ICS 29.120.40Compliance with a British Standard cannot confer imm

4、unity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61058-2-6:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

5、EN 61058-2-6 October 2016 ICS 29.120.40 English Version Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery (IEC 61058-2-6:2016) Interrupteurs pour appareils - Partie 2-6: Exigence

6、s particulires pour les interrupteurs utiliss sur les outils lectroportatifs moteur, les outils portables et les machines pour jardins et pelouses (IEC 61058-2-6:2016) Gerteschalter - Teil 2-6: Besondere Anforderungen fr Schalter zur Anwendung in elektromotorisch bettigten handgefhrten Werkzeugen, t

7、ransportablen Werkzeugen und Rasen- und Gartenmaschinen (IEC 61058-2-6:2016) This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na

8、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German).

9、 A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bu

10、lgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

11、erland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in

12、any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61058-2-6:2016 E BS EN 61058-2-6:2016EN 61058-2-6:2016 2 European foreword The text of document 23J/402/FDIS, future edition 1 of IEC 61058-2-6, prepared by SC 23J “Switches for appliances” of IEC/TC 23 “Electrical accesso

13、ries” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61058-2-6:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-04-21 latest date

14、by which the national standards conflicting with the document have to be withdrawn (dow) 2019-10-21 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such p

15、atent rights. Endorsement notice The text of the International Standard IEC 61058-2-6:2016 was approved by CENELEC as a European Standard without any modification. The Bibliography EN 61058-1:2002 applies, except as follows: In the Bibliography of EN 61058-1:2002, the following notes have to be adde

16、d for the standards indicated: IEC 60745-1 NOTE Harmonized as EN 60745-1 1). IEC 62841-1 NOTE Harmonized as EN 62841-1. 1)The latest edition is superseded by EN 62841-1:2015. BS EN 61058-2-6:2016EN 61058-2-6:2016 3 Annex ZA (normative) Normative references to international publications with their co

17、rresponding European publications Annex ZB of EN 61058-1:2002 applies. BS EN 61058-2-6:2016 2 IEC 61058-2-6:2016 IEC 2016 CONTENTS FOREWORD 3 1 Scope .5 2 Normative references 5 3 Definitions .5 4 General requirements 5 5 General notes on tests 5 6 Rating .5 7 Classification .5 8 Marking and documen

18、tation .6 9 Protection against electric shock6 10 Provision for earthing 7 11 Terminals and terminations 7 12 Construction 9 13 Mechanism 9 14 Protection against solid objects, ingress of water and humid conditions 9 15 Insulation resistance and dielectric strength .9 16 Heating . 10 17 Endurance .

19、10 18 Mechanical strength 14 19 Screws, current-carrying parts and connections . 14 20 Clearances, creepage distances, solid insulation and coatings of rigid printed board assemblies 14 21 Fire hazard 14 22 Resistance to rusting . 15 23 Abnormal operation and fault conditions for electronic switches

20、 . 15 24 Components for electronic switches . 16 25 EMC requirements . 16 Annexes . 17 Annex F (informative) Switch application guide 17 Annex H (informative) Flat quick-connect terminations, method for selection of female connectors 17 Annex N (normative) Altitude correction factors 17 Annex U (nor

21、mative) Dimensions of tabs forming part of a switch . 17 Annex V (informative) Requirements and tests for resistance to abnormal heat for unattended appliances 17 Bibliography . 18 Table 3 Switch information .6 Table 17 Test loads for electrical endurance tests for a.c. circuits 12 Table 18 Test loa

22、ds for electrical endurance tests for d.c. circuits 12 BS EN 61058-2-6:2016IEC 61058-2-6:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SWITCHES FOR APPLIANCES Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn an

23、d garden machinery FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning sta

24、ndardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prepara

25、tion is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely wit

26、h the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subj

27、ects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical

28、 content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent p

29、ossible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conf

30、ormity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its dire

31、ctors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arisin

32、g out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is dr

33、awn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61058-2-6 has been prepared by subcommittee 23J: Switches for appliances, of IEC t

34、echnical committee 23: Electrical accessories. The text of this standard is based on the following documents: FDIS Report on voting 23J/402/FDIS 23J/406/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This public

35、ation has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 61058-2-6:2016 4 IEC 61058-2-6:2016 IEC 2016 This Part 2-6 is to be used in conjunction with IEC 61058-1:2000, Switches for appliances Part 1: General requirements, and its Amendments 1 (2001) and 2 (2007). This Part 2-6

36、 supplements or modifies the corresponding clauses in IEC 61058-1, so as to convert that publication into the IEC standard: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. When a particular subclause of Part 1 i

37、s not mentioned in this Part 2-6, that subclause applies as far as reasonable. Where this standard states “addition”, “modification” or “replacement”, the relevant text of Part 1 is to be adapted accordingly. In this standard: 1) the following print types are used: requirements proper: in roman type

38、; test specifications: in italic type; notes: in small roman type. 2) subclauses, notes, figures and tables which are additional to those in Part 1 are numbered starting from 101. Annexes which are additional to those in Part 1 are lettered AA, BB, etc. A list of all the parts in the IEC 61058 serie

39、s, under the general title Switches for appliances, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publicati

40、on. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61058-2-6:2016IEC 61058-2-6:2016 IEC 2016 5 SWITCHES FOR APPLIANCES Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools a

41、nd lawn and garden machinery 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard is a subset based on IEC 61058-1. The clauses outlined below are intended to address the specific requirements for switches incorporated into or integrated with electric motor-ope

42、rated hand-held tools, transportable tools and lawn and garden machinery. This standard is intended for switches with an ambient temperature up to and including 55 C. Switches tested to IEC 61058-1 are considered to comply with this standard and additional testing is not required provided ratings, l

43、oads, and endurance are correct. NOTE This Part 2-6 takes into account the fact that tests are conducted as part of the end product evaluation (e.g. products tested according to the IEC 60745 and IEC 62841 series, and lawn and gardening equipment tested according to the IEC 60335 series) and need no

44、t be conducted on the component switch. 2 Normative references This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable. 4 General requirements This clause of Part 1 is applicable. 5 General notes on tests This clause of Part 1 is applicable. 6 Rating This clause of Par

45、t 1 is applicable. 7 Classification This clause of Part 1 is applicable, except as follows: BS EN 61058-2-6:2016 6 IEC 61058-2-6:2016 IEC 2016 7.1.3.2 This subclause is not applicable. 7.1.3.3 This subclause is not applicable. 7.1.5.3.1 This subclause is not applicable. 7.1.5.3.2 This subclause is n

46、ot applicable. 8 Marking and documentation This clause of Part 1 is applicable, except as follows: 8.1 Addition: Switches declared for use in appliances such as power tools are considered unique type (U.T) when referencing Table 3. Replacement of Table 3: Table 3 Switch information Characteristic Me

47、ans of information SWITCH IDENTIFICATION UNIQUE TYPE REFERENCE U.T. Manufacturers name or trade mark Marking (Ma) Type reference (model or catalogue number) Marking (Ma) Identification that the switch is in compliance with this Part 2-6 (8.101) Marking (Ma) Type of appliance for which a switch shall

48、 be used (hand held tools, transportable tools, or lawn and garden machinery) Documentation (Do) Number of operating cycles (7.1.4) Documentation (Do) Degree of protection against electric shock, from outside an appliance (7.1.5.3) Documentation (Do) Number of contact only cycles (TC 7 for electroni

49、c switches) (17.2.4.7) Documentation (Do) For electronic switches, the duty-type S1 (7.1.16) Documentation (Do) Addition: 8.101 The marking to indicate compliance with this Part 2-6 shall be “PT“. Compliance is checked by inspection. 9 Protection against electric shock This clause of Part 1 is applicable, except as follows: 9.1 This subclause is not applicable. NOTE This subclause is covered in the end product standard. 9.2 This subclause is not applicable. NOTE This subclause is covere