EN 61076-2-106-2011 en Connectors for electronic equipment - Product requirements - Part 2-106 Circular connectors - Detail specification for connectors M 16 x 0 75 with screw-lock.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61076-2-106:2011Connectors for electronic equipment Product r e q u i r e m e n t s Part 2-106: Circular connectors Detail specification for connectors M 16 x 0,75 with scr

2、ew-locking and degree of protection IP40 or IP (IEC 61076-2-106:2011) BS EN 61076-2-106:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61076-2-106:2011. It is identical to IEC 61076-2-106:2011The UK participation in its preparation was entrusted to Technic

3、al Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are re

4、sponsible for its correct application. BSI 2011 ISBN 978 0 580 58854 9 ICS 31.220.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2011.Amendments

5、 issued since publicationDate T e x t a f f e c t e dBS EN 61076-2-106:2011EUROPEAN STANDARD EN 61076-2-106 NORME EUROPENNE EUROPISCHE NORM August 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechni

6、sche Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-2-106:2011 E ICS 13.220.10 English version Connectors for electronic equipment - Product requirements -

7、 Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 (IEC 61076-2-106:2011) Connecteurs pour quipements lectroniques - Exigences de produits - Partie 2-106: Connecteurs circulaires - Spcification particulire po

8、ur les connecteurs M 16 x 0,75 vis de degr de protection IP40 ou IP65/67 (CEI 61076-2-106:2011) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 2-106: Rundsteckverbinder - Bauartspezifikation fr Steckverbinder M16 x 0,75 mit Schraubverriegelung und Schutzart IP40 oder IP6

9、5/67 (IEC 61076-2-106:2011) This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

10、e lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

11、the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finlan

12、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-2-106:2011EN 61076-2-106:2011 - 2 - Foreword The text of document

13、 (48B/2239/FDIS), future edition 1 of IEC 61076-2-106, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-2-106 on 2011-07-26. Attention

14、is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level

15、 by publication of an identical national standard or by endorsement (dop) 2012-04-26 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-07-26 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-2-1

16、06:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60130-9 NOTE Harmonized as EN 60130-9. _ BS EN 61076-2-106:2011- 3 - EN 61076-2-106:2011 Annex ZA (normative)

17、 Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refere

18、nced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-581 - International Electrotechnical Vocabulary - Part 581: Electromechanica

19、l components for electronic equipment - - IEC 60068-1 + corr. October +A1 1988 1988 1992 Environmental testing - Part 1: General and guidance EN 60068-11) 1994 IEC 60352-2 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance EN 60352-2 -

20、IEC 60512 Series Connectors for electronic equipment - Tests and measurements EN 60512 Series IEC 60512-1-100 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications EN 60512-1-100 - IEC 60529 1989 Degrees of protection provided by enclosures (I

21、P Code) EN 60529 + corr. May 1991 1993 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 61076-1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 -

22、IEC 61076-2 - Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors EN 61076-2 - IEC 61984 2008 Connectors - Safety requirements and tests EN 61984 2009 ISO 1302 - Geometrical Product Specifications (GPS) - Indication of surface texture

23、in technical product documentation EN ISO 1302 - 1) EN 60068-1 includes A1 to IEC 60068-1 + corr. October . 2 61076-2-106 IEC:2011 CONTENTS FOREWORD . 6 1 Scope . 9 2 Normative references . 9 3 General information 10 3.1 Definitions . 10 3.2 Number of contacts or contact cavities 10 3.3 Ratings and

24、characteristics . 10 3.4 Marking . 10 3.5 Safety aspects. 10 4 Dimensional information . 10 4.1 General . 10 4.2 Survey of styles and variants . 11 4.2.1 Fixed connectors . 11 4.2.2 Free connectors 17 4.2.3 Accessories Protective caps . 25 4.3 Interface dimensions . 26 4.3.1 Interface dimensions fix

25、ed connector for IP40 variants 26 4.3.2 Interface dimensions free connector for IP40 variants 27 4.3.3 Interface dimensions fixed connector for IP65/67 variants . 28 4.3.4 Interface dimensions free connector for IP65/67 variants . 29 4.3.5 Pin front view of connectors and contact position 30 4.4 Siz

26、ing gauges and retention force gauges . 32 5 Characteristics . 32 5.1 Classification into climatic categories 32 5.2 Electrical characteristics 33 5.2.1 Rated voltage Rated impulse voltage Pollution degree . 33 5.2.2 Voltage proof . 33 5.2.3 Current-carrying capacity. 34 5.2.4 Contact resistance . 3

27、4 5.2.5 Insulation resistance 34 5.3 Mechanical characteristics 34 5.3.1 IP degree of protection 34 5.3.2 Mechanical operation 35 5.3.3 Insertion and withdrawal forces . 35 5.3.4 Contact retention in insert 35 5.3.5 Polarizing method 35 5.3.6 Vibration (sinusoidal) . 35 5.3.7 Shock 35 6 Test schedul

28、e . 36 6.1 General . 36 6.1.1 Arrangement for contact resistance measurements 36 6.1.2 Arrangement for dynamic stress tests (vibration) . 37 6.2 Test schedule 38 6.2.1 Test group P Preliminary 38 6.2.2 Test group AP Dynamic/ Climatic 39 6.2.3 Test group BP Mechanical endurance . 41 61076-2-106 IEC:2

29、011 3 6.2.4 Test group CP Electrical load . 42 6.2.5 Test group DP Chemical resistivity . 42 6.2.6 Test group EP Connection method tests . 43 Bibliography 44 Figure 1 Fixed connector, male contacts, IP40, front mounting 11 Figure 2 Fixed connector, male contacts, IP40, rear mounting . 12 Figure 3 Fi

30、xed connector, male contacts, IP65/67, front mounting 12 Figure 4 Fixed connector, male contacts, IP65/67, rear mounting 13 Figure 5 Fixed connector, female contacts, IP40, front mounting . 14 Figure 6 Fixed connector, female contacts, IP40, rear mounting 14 Figure 7 Fixed connector, female contacts

31、, IP65/67, front mounting . 15 Figure 8 Fixed connector, female contacts, IP65/67, rear mounting . 16 Figure 9 Dimensions panel cut out IP40 . 16 Figure 10 Dimensions panel cut out IP65/67 17 Figure 11 Free connector, rewireable, straight version, cable outlet with clamping ring, male contacts, IP40

32、 18 Figure 12 Free connector, rewireable, straight version, flexible cable boot, male contacts, IP40 . 18 Figure 13 Free connector, rewireable, right-angled version, flexible cable boot, male contacts, IP40 . 19 Figure 14 Free connector, rewireable, straight version, cable outlet with clamping ring,

33、 male contacts, IP65/67 . 19 Figure 15 Free connector, non-rewireable, straight version, flexible cable boot, male contacts, IP65/67 20 Figure 16 Free connector, rewireable, right-angled version, male contacts, IP65/67 . 20 Figure 17 Free connector, non-rewireable, right-angled version, male contact

34、s, IP65/67 . 21 Figure 18 Free connector, rewireable, straight version, cable outlet with clamping ring, female contacts, IP40 . 21 Figure 19 Free connector, rewireable, straight version, flexible cable boot, female contacts, IP40 . 22 Figure 20 Free connector, rewireable, right-angled version, flex

35、ible cable boot, female contacts, IP40 . 22 Figure 21 Free connector, rewireable, straight version, cable outlet with clamping ring, female contacts, IP65/67 . 23 Figure 22 Free connector, non-rewireable, straight version, female contacts, IP65/67 . 23 Figure 23 Free connector, rewireable, right-ang

36、led version, female contacts, IP65/67 . 24 Figure 24 Free connector, rewireable, right-angled version, female contacts, IP65/67 . 24 Figure 25 Protective cap - connector with male contacts for IP40 variants . 25 Figure 26 Protective cap- connector with female contacts for IP40 variants . 25 Figure 2

37、7 Protective cap - connector with male contacts for IP65/67 variants 25 Figure 28 Protective cap- connector with female contacts for IP65/67 variants . 26 Figure 29 Interface dimensions fixed connector for IP40 variants . 26 Figure 30 Interface dimensions free connector for IP40 variants 27 Figure 3

38、1 Interface dimensions fixed connector for IP65/67 variants 28 4 61076-2-106 IEC:2011 Figure 32 Interface dimensions free connector for IP65/67 variants . 29 Figure 33 Pin front view of connectors and contact position (variants 3 to 7a) 30 Figure 34 Pin front view of connectors and contact position

39、(variants 7b to 19a) 31 Figure 35 Gauge dimensions . 32 Figure 36 Contact resistance arrangement . 36 Figure 37 Dynamic stress test arrangement . 37 Table 1 Contact termination . 10 Table 2 Styles of fixed connectors . 11 Table 3 Dimension style AM . 11 Table 4 Dimension style BM . 12 Table 5 Dimens

40、ion style CM 13 Table 6 Dimension style DM 13 Table 7 Dimension style AF . 14 Table 8 Dimension style BF . 15 Table 9 Dimension style CF . 15 Table 10 Dimension style DF . 16 Table 11 Dimension panel cut out IP65/67 . 17 Table 12 Styles of free connectors . 17 Table 13 Dimensions style IM 18 Table 1

41、4 Dimensions style JM 18 Table 15 Dimensions style KM . 19 Table 16 Dimensions style LM . 19 Table 17 Dimensions style MM 20 Table 18 Dimensions style NM . 20 Table 19 Dimensions style OM . 21 Table 20 Dimensions style IF . 21 Table 21 Dimensions style JF 22 Table 22 Dimensions style KF 22 Table 23

42、Dimensions style LF 23 Table 24 Dimensions style MF . 23 Table 25 Dimensions style NF 24 Table 26 Dimensions style OF . 24 Table 27 Interface dimensions fixed connector for IP40 variants 26 Table 28 Interface dimensions free connector for IP40 variants . 27 Table 29 Interface dimensions fixed connec

43、tor for IP65/67 variants . 28 Table 30 Interface dimensions free connector for IP65/67 variants. 29 Table 31 Gauges . 32 Table 32 Climatic category . 32 Table 33 Rated voltage Impulse voltage Pollution degree 33 Table 34 Voltage proof connectors . 34 Table 35 Number of mechanical operations . 35 Tab

44、le 36 Insertion and withdrawal forces . 35 61076-2-106 IEC:2011 5 Table 37 Number of test specimens . 36 Table 38 Test group P . 38 Table 39 Test group AP . 39 Table 40 Test group BP . 41 Table 41 Test group CP . 42 Table 42 Test group DP . 42 Table 43 Test group EP . 43 6 61076-2-106 IEC:2011 INTER

45、NATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT PRODUCT REQUIREMENTS Part 2-106: Circular connectors Detail specification for connectors M 16 0,75 with screw-locking and degree of protection IP40 or IP65/67 FOREWORD 1) The International Electrotechnical Commission (IEC) is

46、 a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to

47、other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in t

48、he subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditi

49、ons determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC