EN 61076-2-107-2010 en Connectors for electronic equipment - Product requirements - Part 2-107 Detail specification for circular hybrid connectors M12 with electrical and fibre-opt.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationConnectors for electronic equipment Product requirementsPart 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw lo

2、ckingBS EN 61076-2-107:2010National forewordThis British Standard is the UK implementation of EN 61076-2-107:2010. It isidentical to IEC 61076-2-107:2010. It supersedes DD IEC/PAS 61076-2-107:2007 which is withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeEPL/48,

3、Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its corre

4、ct application. BSI 2010 ISBN 978 0 580 64443 6 ICS 31.220.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2010.Amendments issued since publicationAmd.

5、 No. Date Text affectedBRITISH STANDARDBS EN 61076-2-107:2010EUROPEAN STANDARD EN 61076-2-107 NORME EUROPENNE EUROPISCHE NORM June 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Man

6、agement Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-2-107:2010 E ICS 31.220.10 English version Connectors for electronic equipment - Product requirements - Part 2-107: Det

7、ail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking (IEC 61076-2-107:2010) Connecteurs pour quipements lectroniques - Exigences de produit - Partie 2-107: Spcification particulire relative aux connecteurs circulaires hybrides M12 contacts

8、lectriques et fibres optiques, verrouillage par vis (CEI 61076-2-107:2010) Steckverbinder fr elektronische Einrichtungen Produktanforderungen -Teil 2-107: Bauartspezifikation fr hybride Rundsteckverbinder M12 mit elektrischen und LWL-Kontakten und mit Schraubverriegelung (IEC 61076-2-107:2010) This

9、European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

10、ences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

11、ember into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga

12、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-2-107:2010EN 61076-2-107:2010 - 2 - Foreword The text of document 48B/2141/FDIS, future edition 1

13、of IEC 61076-2-107, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-2-107 on 2010-06-01. Attention is drawn to the possibility that so

14、me of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical nat

15、ional standard or by endorsement (dop) 2011-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-06-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-2-107:2010 was approved by CENELEC as

16、a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61076-2-001:2001 NOTE Harmonized as EN 61076-2-001:2001 (not modified). IEC 61076-2-101:2008 NOTE Harmonized as EN 61076-2-101:2008 (not modi

17、fied). IEC 61300-2-12:2009 NOTE Harmonized as EN 61300-2-12:2009 (not modified). IEC 61300-2-17:2003 NOTE Harmonized as EN 61300-2-17:2003 (not modified). IEC 61300-2-18:2005 NOTE Harmonized as EN 61300-20-18:2005 (not modified). IEC 61300-2-42:2005 NOTE Harmonized as EN 61300-2-42:2005 (not modifie

18、d). _ BS EN 61076-2-107:2010- 3 - EN 61076-2-107:2010 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the editi

19、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year - - Connecto

20、r sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre EN 50377-7-4 - IEC 60050-581 2008 International Electrotechnical Vocabulary - Part 581: Electromechanical c

21、omponents for electronic equipment - - IEC 60068-1 + A1 1988 1992 Environmental testing - Part 1: General and guidance EN 60068-1 -1) 1994 - IEC 60352 Series Solderless connections EN 60352 Series IEC 60512-1-100 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General -

22、Applicable publications EN 60512-1-100 - IEC 60529 2001 Degrees of protection provided by enclosures (IP Code) - - IEC 60664-1 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 - IEC 60793-2-40 - Optical fibres - Part 40: Produ

23、ct specifications - Sectional specification for categroy A4 multimode fibresEN 60793-2-40 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60998-2-1 (mod) 2002 Connecting devices for low-voltage circuit

24、s for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units EN 60998-2-1 2004 1) EN 60068-1 includes A1 to IEC 60068-1 + corr. October . BS EN 61076-2-107:2010EN 61076-2-107:2010 - 4 - Publication Year Title EN/H

25、D Year IEC 60999-1 1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (included) EN 60999-1 2000 IEC 61076-1

26、 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 IEC 61300-2-1 2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 2009 IEC 6130

27、0-2-2 2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN 61300-2-2 + corr. May 2009 2009 IEC 61300-2-4 1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures

28、 - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 1997 IEC 61300-2-5 2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion FprEN 61300-2-5 2008 IEC 61300-2-26 2006 Fibre optic interconnecting devices and passive comp

29、onents - Basic test and measurement procedures - Part 2-26: Tests - Salt mist EN 61300-2-26 2007 IEC 61300-2-27 1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow EN 61300-2-27 1997 IEC 61300-3-4 2001 Fibre

30、 optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 2001 IEC 61300-3-6 2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Ex

31、aminations and measurements - Return loss EN 61300-3-6 2009 IEC 61300-3-10 2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force EN 61300-3-10 2007 IEC 61300-3-34 2009 Fibre optic int

32、erconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61300-3-34 2009 BS EN 61076-2-107:2010- 5 - EN 61076-2-107:2010 Publication Year Title EN/HD Year IEC 61753-022-2 - Fibre optic i

33、nterconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment EN 61753-022-2 - IEC 61754-20 2002 Fibre optic connector interfaces - Part 20: Type LC connector family EN 61754-20 2002 IEC 6

34、1755-2-1 - Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres EN 61755-2-1 - IEC 61755-3-1 - Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia

35、PC ferrule, single mode fibre EN 61755-3-1 - IEC 61984 2008 Connectors - Safety requirements and tests EN 61984 2009 ISO 1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation EN ISO 1302 - BS EN 61076-2-107:2010 2 61076-2-107 IEC:2010 CONT

36、ENTS 1 General information7 1.1 Scope7 1.2 Normative references 7 1.3 Terms and definitions 9 1.4 Recommended method of termination .9 1.5 Ratings and characteristics .9 1.5.1 Electrical contacts .9 1.5.2 Optical contacts.9 1.6 Marking .10 1.7 Safety aspects.10 2 Technical information .10 2.1 Mounti

37、ng orientation10 2.2 Survey of styles and variants.10 2.2.1 Fixed connectors .10 2.2.2 Free connectors 12 2.2.3 Adaptor .12 3 Dimensions 13 3.1 General .13 3.2 Interface dimensions .14 3.2.1 Pin front view plug connector.14 3.3 Engagement (mating) information15 3.4 Gauges for electric contacts 16 4

38、Characteristics .16 4.1 Climatic category.16 4.2 Electrical characteristics (only electrical contacts).17 4.2.1 Rated voltage Impulse voltage Pollution degree.17 4.2.2 Voltage proof.17 4.2.3 Current-carrying capacity.17 4.2.4 Contact resistance.18 4.2.5 Insulation resistance18 4.3 Optical characteri

39、stics (only optical contacts) 18 4.3.1 Dimensions for ferrule and end face 18 4.3.2 Insertion loss (reference).18 4.3.3 Insertion loss (random mate) .18 4.3.4 Return loss (random mate) 18 4.4 Mechanical19 4.4.1 IP degree of protection 19 4.4.2 Mechanical operation 19 4.4.3 Insertion and withdrawal f

40、orces .19 4.4.4 Contact retention of electrical contacts in insert.20 4.4.5 Polarizing method20 4.4.6 Vibration (sinusoidal).20 5 Test schedule.20 5.1 General .20 5.1.1 Arrangement for contact resistance measurements21 BS EN 61076-2-107:201061076-2-107 IEC:2010 3 5.1.2 Arrangement for dynamic stress

41、 tests (vibration) .21 5.2 Test schedule22 5.2.1 Test group P Preliminary 22 5.2.2 Test group AP Dynamic/ Climatic24 5.2.3 Test group BP Mechanical endurance.28 5.2.4 Test group CP Electrical load .31 5.2.5 Test group DP Chemical resistivity .32 5.2.6 Test group EP Connection method tests .33 Biblio

42、graphy34 Figure 1 Fixed connector, electrical female contacts, single hole mounting thread M16 1,5, mounting orientation10 Figure 2 Fixed connector, electrical female contacts, for feed through, single hole mounting thread M16 1,5 .11 Figure 3 Free connector, straight version, with locking nut, male

43、 contacts .12 Figure 4 Adaptor, straight version, without locking nut .13 Figure 5 Pin front view plug connector .14 Figure 6 Engagement (mating) information 15 Figure 7 Gauge dimensions .16 Figure 8 Contact resistance arrangement.21 Figure 9 Dynamic stress test arrangement A22 Figure 10 Dynamic str

44、ess test arrangement B22 Table 1 Styles of fixed connectors .10 Table 2 Dimensions for connector style AF 11 Table 3 Dimensions for connector style BF 11 Table 4 Styles of free connectors.12 Table 5 Dimensions for connector style CM .12 Table 6 Styles of adaptors .12 Table 7 Dimensions for adaptor s

45、tyle DF13 Table 8 Dimensions for front view plug connector 15 Table 9 Dimensions for connectors type D in mated position16 Table 10 Gauges .16 Table 11 Climatic Category16 Table 12 Rated voltage Impulse voltage Pollution degree 17 Table 13 Voltage proof.17 Table 14 Number of mechanical operations .1

46、9 Table 15 Insertion and withdrawal forces .20 Table 16 Number of test specimens .21 Table 17 Test group P .23 Table 18 Test group AP .24 Table 19 Test group BP .28 Table 20 Test group CP .31 Table 21 Test group DP .32 Table 22 Test group EP .33 BS EN 61076-2-107:2010 6 61076-2-107 IEC:2010 IEC SC 4

47、8B Connectors Specification available from: IEC General secretariat or from the addresses shown on the inside cover.IEC 61076-2-107, Ed. 1.0 ELECTRONIC COMPONENTS DETAIL SPECIFICATION in accordance with IEC 61076-1 Circular hybrid connectors with M12screw locking, with 2 electrical contacts with 1,0

48、 male contacts and with 2 fibre optic contacts 1,25 mm ferrule in accordance with IEC 61755-3-1 grade 1 IEC 731/10 Free cable connectors Straight connectors Fixed connectors Flange mounting Single hole mounting Adapters Feed-through BS EN 61076-2-107:201061076-2-107 IEC:2010 7 CONNECTORS FOR ELECTRO

49、NIC EQUIPMENT PRODUCT REQUIREMENTS Part 2107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking 1 General information 1.1 Scope This standard describes circular M12 connectors typically used for industrial process measurement and control. These connectors consist of fixed and free connectors with screw-locking as well as adaptors.