EN 61169-24-2009 en Radio-frequency connectors - Part 24 Sectional specification - Radio frequency coaxial connectors with screw coupling typically for use in 75 ohm cable networks.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Radio-frequency connectors Part 24: Sectional specification Radio frequencycoaxial connectors with screw coupling

2、, typically foruse in 75 ohm cable networks (type F)BS EN 61169-24:2009National forewordThis British Standard is the UK implementation of EN 61169-24:2009. It isidentical to IEC 61169-24:2009. It supersedes BS EN 61169-24:2002 which iswithdrawn.The UK participation in its preparation was entrusted b

3、y Technical CommitteeEPL/46, Cables, wires and waveguides, radio frequency connectors and acces-sories for communication and signalling, to Subcommittee EPL/46/2, Radiofrequency connectors and waveguides.A list of organizations represented on this committee can be obtained onrequest to its secretary

4、.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 58206 6ICS 31.220.10; 33.120.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was

5、published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61169-24:2009EUROPEAN STANDARD EN 61169-24 NORME EUROPENNE EUROPISCHE NORM April 2009 CENELEC European Committee for Electrot

6、echnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. E

7、N 61169-24:2009 E ICS 31.220.10 Supersedes EN 61169-24:2001English version Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) (IEC 61169-24:2009) Connecteurs pour frquences radiol

8、ectriques - Partie 24: Spcification intermdiaire - Connecteurs coaxiaux pour frquences radiolectriques avec couplage viss, spcifiquement utiliss dans les rseaux cbls 75 ohms (srie F) (CEI 61169-24:2009) Hochfrequenzsteckverbinder -Teil 24: Rahmenspezifikation - Koaxiale Hochfrequenzsteckverbinder mi

9、t Schraubkupplung, vorzugsweise fr den Einsatz in 75 Ohm Kabelnetzen (Typ F) (IEC 61169-24:2009) This European Standard was approved by CENELEC on 2009-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

10、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French

11、, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bu

12、lgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 61169-24:2009

13、- 2 - Foreword The text of document 46F/108/FDIS, future edition 2 of IEC 61169-24, prepared by SC 46F, R.F. and microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vo

14、te and was approved by CENELEC as EN 61169-24 on 2009-03-01. This European Standard supersedes EN 61169-24:2001. EN 61169-24:2009 differs from EN 61169-24:2001 in that all drawings have been reworked and improved to allow frequency extension up to 3 GHz. The following dates were fixed: latest date b

15、y which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-03-01 Annex ZA has been added by CENELEC. _ Endorsement notic

16、e The text of the International Standard IEC 61169-24:2009 was approved by CENELEC as a European Standard without any modification. _ - 3 - EN 61169-24:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced

17、 documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifi

18、cations, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-52 -1)Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 19962)IEC 61169-1 A1 A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic

19、 specification - General requirements and measuring methods EN 61169-1 A1 A2 1994 1996 1997 1)Undated reference. 2)Valid edition at date of issue. 2 61169-24 IEC:2009(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Interface dimensions 6 3.1 Dimensions .6 3.1.1 Connector “F” type female

20、 socket (indoor) physical dimensions.7 3.1.2 Connector “F” type male plug (indoor) physical dimensions .8 3.2 Mechanical gauges9 3.2.1 Mating socket centre conductor acceptance diameter test .9 3.2.2 Mating port centre conductor acceptance electrical test.10 3.2.3 Reference plane electrical contact.

21、10 4 Quality assessment procedures10 4.1 General .10 4.2 Ratings and characteristics .10 4.3 Environmental characteristics for outdoor sockets (see Annex A) 12 4.4 Test schedule and inspection requirements .12 4.4.1 Acceptance tests .12 4.4.2 Periodic tests 13 4.5 Procedures14 4.5.1 Quality conforma

22、nce inspection .14 4.5.2 Qualification approval and its maintenance14 5 Instructions for preparation of detail specifications .14 5.1 General .14 5.2 Identification of the detail specification 15 5.3 Identification of the component15 5.4 Performance15 5.5 Marking, ordering information and related ma

23、tters.15 5.6 Selection of tests, test conditions and severities15 5.7 Blank detail specification pro-forma for type F connector.16 Annex A (informative) Recommended outdoor “F” type socket / Plug physical dimensions .21 Figure 1 Connector “F” type female socket (indoor) (for dimensions, see Table 1)

24、 .7 Figure 2 Connector “F” type male plug (indoor) (for dimensions, see Table 2)8 Figure 3 Gauge for the centre socket conductor.9 Figure A.1 Outdoor female “F” socket (for dimensions, see Table A.1)21 Figure A.2 Outdoor “F” type male plug (for dimensions, see Table A.2)22 BS EN 61169-24:200961169-2

25、4 IEC:2009(E) 3 Table 1 Connector “F” type female socket (indoor).7 Table 2 Connector “F” type male plug (indoor) .8 Table 3 Test sequence for the centre socket conductor9 Table 4 Ratings and characteristics .10 Table 5 Acceptance tests.12 Table 6 Periodic tests 13 Table A.1 Outdoor female “F” socke

26、t dimensions .21 Table A.2 Outdoor “F” type male plug dimensions22 BS EN 61169-24:2009 4 61169-24 IEC:2009(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 cable

27、networks (type F) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning stan

28、dardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparat

29、ion is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with

30、 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subje

31、cts since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical

32、content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent po

33、ssible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equ

34、ipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and

35、IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Att

36、ention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.

37、IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-24 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive compo

38、nents and accessories. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. This second edition differs from the first edition in that all drawings have been reworked and improved to allow frequency extension up to 3 GHz. BS EN 61169-24:2

39、00961169-24 IEC:2009(E) 5 The text of this standard is based on the following documents: FDIS Report on voting 46F/108/FDIS 46F/128/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafte

40、d in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result d

41、ate indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN 61169

42、-24:2009 6 61169-24 IEC:2009(E) RADIO-FREQUENCY CONNECTORS Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 cable networks (type F) 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules

43、for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 75 cable networks (type F). It describes the interface dimensions with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type F

44、connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated r

45、eferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods Amendment 1 (1996) Amendment 2 (1

46、997) EN 60068-2-52, Environmental testing Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution) 3 Interface dimensions 3.1 Dimensions Millimetres are original dimensions. All undimensioned pictorial configurations are for reference purposes only. BS EN 61169-24:200961169-24 IEC:2

47、009(E) 7 3.1.1 Connector “F” type female socket (indoor) physical dimensions 3 C D E FAB3/8-32 UNEF-2A 0,05AReference plane IEC 284/09 Figure 1 Connector “F” type female socket (indoor) (for dimensions, see Table 1) Table 1 Connector “F” type female socket (indoor) Description Reference mm inch Note

48、 Min. Max. Min. Max. Reference plane opening inner diameter A 3,90 7,4 0,154 0,291 2 Reference plane outer diameter B 7,50 8,50 0,295 0,335 Positive contact point depth C - 4,70 - 0,185 4 Port minimum full thread length D 7,50 - 0,295 - 3 Minimum center contact depth E 9,00 - 0,354 - 5 Center conduc

49、tor guide inner diameter F 1,2 1,5 0,047 0,059 NOTE 1 Drawing not to scale. NOTE 2 No protrusion of the dielectric beyond the reference plane is permitted. NOTE 3 Thread relief not to exceed two full threads. NOTE 4 Recommended mating male center conductor diameter: 0,025 in (0,64 mm) min. to 0,042 in. (1,07 mm) max. NOTE 5 Center contact geometry optional. BS EN 61169-24:2009 8 61169-24 IEC:2009(E) 3.1.2 Connector