EN 61169-44-2013 en Radio-frequency connectors - Part 44 Sectional specification for series SMP push-on radio-frequency coaxial connectors.pdf

1、BSI Standards PublicationRadio-frequency connectorsPart 44: Sectional specification for series SMP push-on radio-frequency coaxial connectorsBS EN 61169-44:2013National forewordThis British Standard is the UK implementation of EN 61169-44:2013. It isidentical to IEC 61169-44:2012. It supersedes DD I

2、EC/PAS 61169-44:2010which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained o

3、nrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 72464 0ICS 33.120.30Compliance with a Briti

4、sh Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61169-44:2013EUROPEAN STANDARD EN 61169-4

5、4 NORME EUROPENNE EUROPISCHE NORM June 2013CENELEC European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation i

6、n any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61169-44:2013 E ICS 33.120.30 English version Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequencycoaxial connectors (IEC 61169-44:2012) Connecteurs pour frquencesradiolect

7、riques - Partie 44: Spcification intermdiairerelative aux connecteurs coaxiaux pourfrquences radiolectriques glissants,srie SMP(CEI 61169-44:2012) Hochfrequenz-Steckverbinder - Teil 44: Rahmenspezifikation fr koaxialeHF-Steckverbinder der SMP-Serie mit Push-on-Einrastmechanismus (IEC 61169-44:2012)

8、This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical re

9、ferences concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of

10、a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yugo

11、slav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61169-44:2013EUROPEAN STANDARD EN 61169-

12、44 NORME EUROPENNE EUROPISCHE NORM June 2013CENELEC European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation

13、in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61169-44:2013 E ICS 33.120.30 English version Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequencycoaxial connectors (IEC 61169-44:2012) Connecteurs pour frquencesradiolec

14、triques - Partie 44: Spcification intermdiairerelative aux connecteurs coaxiaux pourfrquences radiolectriques glissants,srie SMP(CEI 61169-44:2012) Hochfrequenz-Steckverbinder - Teil 44: Rahmenspezifikation fr koaxialeHF-Steckverbinder der SMP-Serie mit Push-on-Einrastmechanismus (IEC 61169-44:2012)

15、 This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical r

16、eferences concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of

17、 a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yug

18、oslav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61169-44:2013EN 61169-44:2013 - 2 - For

19、eword The text of document 46F/184/CDV, future edition 1 of IEC 61169-44, prepared by SC 46F, “R.F. and microwave passive components“, of IEC TC 46, “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and

20、approved by CENELEC as EN 61169-44:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-12-14 latest date by which the national standards conflicting with the docum

21、ent have to be withdrawn (dow) 2016-01-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the Internati

22、onal Standard IEC 61169-44:2012 was approved by CENELEC as a European Standard without any modification. BS EN 61169-44:201- 3 - EN 61169-44:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole o

23、r in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has

24、 been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 + A1 + A2 1994 1996 1997 B

25、S EN 61169-44:201 2 BS EN 61169-44:2013EN 61169-44:2013EN 61169-44:2013 - 2 - Foreword The text of document 46F/184/CDV, future edition 1 of IEC 61169-44, prepared by SC 46F, “R.F. and microwave passive components“, of IEC TC 46, “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passiv

26、e components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61169-44:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop)

27、2013-12-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-01-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identi

28、fying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61169-44:2012 was approved by CENELEC as a European Standard without any modification. BS EN 61169-44:201- 3 - EN 61169-44:2013 Annex ZA (normative) Normative references to international publications w

29、ith their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume

30、nt (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification -

31、 General requirements and measuring methods EN 61169-1 + A1 + A2 1994 1996 1997 BS EN 61169-44:201 3 BS EN 61169-44:2013EN 61169-44:2013 2 61169-44 IEC:2012(E) CONTENTS 1 Scope . 6 2 Normative references . 6 3 Mating face and gauge information . 7 Dimensions General connectors Grade 1 . 7 3.1Connect

32、or with pin-centre contact 7 3.1.1Connector with socket-centre contact 10 3.1.2Gauges . 11 3.2Gauge pin for socket-centre contact 11 3.2.1Gauge for outer contact of connector with socket-centre contact . 12 3.2.2Dimensions standard test connectors grade 0 16 3.3Connector with pin-centre contact 16 3

33、.3.1Connector with socket-centre contact 18 3.3.24 Quality assessment procedure 19 General . 19 4.1Rating and characteristics (see Clause 6 of IEC 61169-1) . 19 4.2Test schedule and inspection requirements-Acceptance tests . 23 4.3Periodic tests. 23 4.3.1Procedures 25 4.4Quality conformance inspecti

34、on . 25 4.4.1Qualification approval and its maintenance 25 4.4.25 Instructions for preparation of detail specifications . 25 General . 25 5.1Identification of the component 25 5.2Performance 26 5.3Marking, ordering information and related matters . 26 5.4Selection of tests, test conditions and sever

35、ities 26 5.5Blank detail specification pro-forma for series SMP connectors . 27 5.6Figure 1 Connector with pin-centre contact Limited detent and full detent (for dimensions and notes, see Table 1) 7 Figure 2 Connector with pin- centre contact Smooth bore (for dimensions and notes, see Table 2) . 8 F

36、igure 3 Connector with pin- centre contact Catchers mit (for dimensions and notes, see Table 3) . 9 Figure 4 Connector with socket-centre contact (for dimensions and notes, see Table 4) 10 Figure 5 Gauge pin for socket-centre contact (for dimensions and notes, see Table 5) 11 Figure 6 Gauge with lim

37、ited detent for outer contact of connector with socket-outer contact (for dimensions and notes, see Table 6) . 12 Figure 7 Gauge pin Full detent for outer contact of connector with socket-centre (for dimensions and notes, see Table 7) . 13 Figure 8 Gauge pin Smooth bore for outer contact of connecto

38、r with socket-centre (for dimensions and notes, see Table 8) . 15 Figure 9 Connector with pin- centre contact Limited detent and full detent (for dimensions and notes, see Table 9) 16 BS EN 61169-44:20161169-44 IEC:2012(E) 3 Figure 10 Connector with pin- centre contact Smooth bore (for dimensions an

39、d notes, see Table 10) . 17 Figure 11 Connector with socket-centre contact (for dimensions and notes, see Table 11) 18 Table 1 Dimensions of connector with pin-centre contact Limited detent and full detent . 7 Table 2 Dimensions of connector with pin-centre contact Smooth bore . 8 Table 3 Dimensions

40、 of connector with pin-centre contact Catchers mit 9 Table 4 Dimensions of connector with socket-centre contact 10 Table 5 Dimensions of gauge pin for socket-centre contact 11 Table 6 Gauge with limited detent for outer contact of connector with socket-outer contact 12 Table 7 Gauge pin Full detent

41、for outer contact of connector with socket-centre . 14 Table 8 Gauge pin Smooth bore for outer contact of connector with socket-centre 15 Table 9 Dimensions of connector with pin-centre contact Limited detent and full detent . 16 Table 10 Dimensions of connector with pin-centre contact Smooth bore .

42、 17 Table 11 Dimensions of connector with socket-centre contact 18 Table 12 Rating and characteristics . 19 Table 13 Acceptance tests . 23 Table 14 Periodic tests 24 BS EN 61169-44:201 4 BS EN 61169-44:2013EN 61169-44:2013 2 61169-44 IEC:2012(E) CONTENTS 1 Scope . 6 2 Normative references . 6 3 Mati

43、ng face and gauge information . 7 Dimensions General connectors Grade 1 . 7 3.1Connector with pin-centre contact 7 3.1.1Connector with socket-centre contact 10 3.1.2Gauges . 11 3.2Gauge pin for socket-centre contact 11 3.2.1Gauge for outer contact of connector with socket-centre contact . 12 3.2.2Di

44、mensions standard test connectors grade 0 16 3.3Connector with pin-centre contact 16 3.3.1Connector with socket-centre contact 18 3.3.24 Quality assessment procedure 19 General . 19 4.1Rating and characteristics (see Clause 6 of IEC 61169-1) . 19 4.2Test schedule and inspection requirements-Acceptan

45、ce tests . 23 4.3Periodic tests. 23 4.3.1Procedures 25 4.4Quality conformance inspection . 25 4.4.1Qualification approval and its maintenance 25 4.4.25 Instructions for preparation of detail specifications . 25 General . 25 5.1Identification of the component 25 5.2Performance 26 5.3Marking, ordering

46、 information and related matters . 26 5.4Selection of tests, test conditions and severities 26 5.5Blank detail specification pro-forma for series SMP connectors . 27 5.6Figure 1 Connector with pin-centre contact Limited detent and full detent (for dimensions and notes, see Table 1) 7 Figure 2 Connec

47、tor with pin- centre contact Smooth bore (for dimensions and notes, see Table 2) . 8 Figure 3 Connector with pin- centre contact Catchers mit (for dimensions and notes, see Table 3) . 9 Figure 4 Connector with socket-centre contact (for dimensions and notes, see Table 4) 10 Figure 5 Gauge pin for so

48、cket-centre contact (for dimensions and notes, see Table 5) 11 Figure 6 Gauge with limited detent for outer contact of connector with socket-outer contact (for dimensions and notes, see Table 6) . 12 Figure 7 Gauge pin Full detent for outer contact of connector with socket-centre (for dimensions and

49、 notes, see Table 7) . 13 Figure 8 Gauge pin Smooth bore for outer contact of connector with socket-centre (for dimensions and notes, see Table 8) . 15 Figure 9 Connector with pin- centre contact Limited detent and full detent (for dimensions and notes, see Table 9) 16 BS EN 61169-44:20161169-44 IEC:2012(E) 3 Figure 10 Connector with pin- centre contact Smooth bore (for dimens