EN 61169-53-2016 en Radio-frequency connectors - Part 53 Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteri.pdf

1、BSI Standards PublicationRadio-frequency connectorsPart 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock Characteristic impedance 50 O (Type S7-16)BS EN 61169-53:2016National forewordThis British Standard is the UK implementation of E

2、N 61169-53:2016. It isidentical to IEC 61169-53:2015. The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee ca

3、n be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87770 4ICS 33.120.30Complia

4、nce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61169-53:2016EUROPE

5、AN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-53 January 2016 ICS 33.120.30 English Version Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 O (Type S7-16) (IEC 61

6、169-53:2015) Connecteurs pour frquences radiolectriques - Partie 53: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur des conducteurs extrieurs de 16 mm verrouillage vis - Impdance caractristique 50 O (Type S7-16) (IEC 61169-53:2015) Ho

7、chfrequenz-Steckverbinder - Teil 53: Rahmenspezifikation fr koaxiale HF-Steckverbinder mit 16 mm Innendurchmesser des Auenleiters und Schraubverriegelung - Wellenwiderstand 50 O (Typ S7-16) (IEC 61169-53:2015) This European Standard was approved by CENELEC on 2015-10-21. CENELEC members are bound to

8、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CE

9、NELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cent

10、re has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital

11、y, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr E

12、lektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61169-53:2016 E BS EN 61169-53:2016EN 61169-53:2016 2 European foreword The text of docum

13、ent 46F/309/CDV, future edition 1 of IEC 61169-53, prepared by SC 46F “R.F. and microwave passive components“ of IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN

14、61169-53:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-29 latest date by which the national standards conflicting with the document have to be withdrawn (

15、dow) 2019-01-29 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61169-53

16、:2015 was approved by CENELEC as a European Standard without any modification. BS EN 61169-53:2016EN 61169-53:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively re

17、ferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common mo

18、difications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61169-1 2013 Radio-frequency connectors - Part 1: Generic specific

19、ation - General requirements and measuring methods EN 61169-1 2013 IEC 62037 series Passive RF and microwave devices, intermodulation level measurement EN 62037 series BS EN 61169-53:2016 2 IEC 61169-53:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Mating face and gauge in

20、formation 6 3.1 Dimensions General connectors Grade 2 6 3.1.1 Connector with pin-centre contact 6 3.1.2 Connector with socket centre contact 7 3.2 Gauges . 8 3.2.1 Gauge pin for socket-centre contact 8 3.2.2 Test procedure 9 3.3 Dimensions Standard test connectors Grade 0 9 3.3.1 Connector with pin-

21、centre contact 9 3.3.2 Standard test connector with socket-centre contact . 10 4 Quality assessment procedures . 12 4.1 General . 12 4.2 Ratings and characteristics (see Clause 5 of IEC 61169-1:2013) 12 4.3 Test schedule and inspection requirements. 14 4.3.1 Acceptance tests . 14 4.3.2 Periodic test

22、s . 14 4.4 Procedures for the quality conformance 15 4.4.1 Quality conformance inspection . 15 4.4.2 Qualification approval and its maintenance 16 5 Instructions for preparation of detail specifications 16 5.1 General . 16 5.2 Identification of the component . 16 5.3 Performances . 16 5.4 Marking, o

23、rdering information and related matters 16 5.5 Selection of tests, test conditions and severities . 16 5.6 Blank detail specification pro-forma for type S7-16 connector . 17 6 Marking . 21 6.1 Marking of component . 21 6.2 Marking and contents of package 21 Figure 1 Connector with pin-centre contact

24、 (for dimensions, see Table 1) 7 Figure 2 Connector with socket-centre contact (for dimensions, see Table 2). 8 Figure 3 Gauge pin for socket-centre contact (for dimensions, see Table 3) . 9 Figure 4 Connector with pin-centre contact (for dimensions, see Table 4) 10 Figure 5 Connector with socket-ce

25、ntre contact (for dimensions, see Table 5). 11 Table 1 Dimensions of connector with pin-centre contact . 7 Table 2 Dimensions of connector with socket centre contact 8 Table 3 Dimensions of gauge pin for socket-centre contact 9 Table 4 Dimensions of connector with pin-centre contact . 10 Table 5 Dim

26、ensions of connector with socket-centre contact 11 BS EN 61169-53:2016IEC 61169-53:2015 IEC 2015 3 Table 6 Rating and characteristics . 12 Table 7 Acceptance tests . 14 Table 8 Periodic tests 15 BS EN 61169-53:2016 4 IEC 61169-53:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUE

27、NCY CONNECTORS Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock Characteristic impedance 50 (Type S7-16) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising a

28、ll national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, T

29、echnical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory

30、work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

31、 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomm

32、endations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any

33、 end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publ

34、ication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indepe

35、ndent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any p

36、ersonal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative

37、references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible

38、 for identifying any or all such patent rights. International Standard IEC 61169-53 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. The text o

39、f this standard is based on the following documents: FDIS Report on voting 46F/309/CDV 46F/321/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Dire

40、ctives, Part 2. BS EN 61169-53:2016IEC 61169-53:2015 IEC 2015 5 A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability

41、 date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates

42、that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 61169-53:2016 6 IEC 61169-53:2015 IEC 2015 RADIO-FREQUENCY CONNECTORS Part 53: Sectional specification for RF coaxial con

43、nectors with inner diameter of outer conductor 16 mm with screw lock Characteristic impedance 50 (Type S7-16) 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with threa

44、ded coupling, typically for use in 50 cable networks (Type S7-16). It prescribes mating face dimensions for general purpose connectors grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications re

45、lating to series 4.1-9.5 RF connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. The S7-16 series RF coaxial connectors with nomina

46、l impedance 50 are threaded coupling units which are used with all kinds of RF cables and microstrips in microwave transmission system. And the working frequency is up to 7,5 GHz. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only

47、. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame

48、ndments) applies. IEC 61169-1:2013, Radio frequency connectors Part 1: Generic specification General requirements and measuring methods IEC 62037-3 (all parts), Passive RF and microwave devices, intermodulation level measurement 3 Mating face and gauge information 3.1 Dimensions General connectors G

49、rade 2 3.1.1 Connector with pin-centre contact The mating face of connector with pin-centre contact is shown in Figure 1 and its dimensions are shown in Table 1. BS EN 61169-53:2016IEC 61169-53:2015 IEC 2015 7 1The tolerance on this dimension is determined by the tolerance of characteristic impedance. 2The design of this dimension should meet sealing performance at the same time the electrical requirements. 3Mechanical and electrical