EN 61300-3-7-2012 en Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7 Examinations and measurements - Wavelength depend.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61300-3-7:2012Fibre optic interconnectingdevices and passivecomponents Basic test andmeasurement procedures Part 3-7: Examinations and measurements Wavelength dependence of

2、 attenuationand return loss of single mode componentsBS EN 61300-3-7:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61300-3-7:2012. It is derived from IEC 61300-3-7:2009. It supersedes BS EN 61300-3-5:2001 and BS EN 61300-3-7:2001 which are withdrawn.The U

3、K participation in its preparation was entrusted byGEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contr

4、act. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI Standards Limited 2012.ISBN 978 0 580 54286 2ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the auth

5、ority of theStandards Policy and Strategy Committee on 29 February 2012.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dTechnical Committee GEL/86, Fibre optics, to Technical CommitteeThe CENELEC common modifications have been implementedeach common modification is indicate

6、d in the text by .at the appropriate places in the text. The start and finish ofEUROPEAN STANDARD EN 61300-3-7 NORME EUROPENNE EUROPISCHE NORM January 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrote

7、chnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61300-3-7:2012 E ICS 33.180.20 Supersedes EN 61300-3-5:2001, EN 61300-3-7:2001English version Fibre optic

8、 interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components (IEC 61300-3-7:2009, modified) Dispositifs dinterconnexion et composants passives fibres

9、optiques - Mthodes fondamentales dessais et de mesures - Partie 3-7: Examens and mesures - Affaiblissement et affaiblissement de rflexion en fonction de la longueur donde des composants en unimodal (CEI 61300-3-7:2009, modifie) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Grundlegen

10、de Prf- und Messverfahren - Teil 3-7: Untersuchungen und Messungen - Wellenlngenabhngigkeit von Dmpfung und Rckflussdmpfung von Einmodenbauteilen (IEC 61300-3-7:2009, modifiziert) This European Standard was approved by CENELEC on 2011-12-07. CENELEC members are bound to comply with the CEN/CENELEC I

11、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to

12、any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

13、official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Pol

14、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Foreword This document (EN 61300-3-7:2012) consists of the text of IEC 61300-3-7:2009 prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC/TC 86, “Fibre optics“,

15、 together with the common modifications prepared by CLC/TC 86BXA “Fibre optic interconnect, passive and connectorised components“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsem

16、ent (dop) 2012-09-07 latest date by which the national standards conflictingwith this document have to be withdrawn (dow) 2012-12-07 This document supersedes EN 61300-3-7:2001 + EN 61300-3-5:2001. Changes from EN 61300-3-7:2001 are to reflect changes made to EN 61300-1 and covers unidirectional and

17、bi-directional methods of measurement. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the Internationa

18、l Standard IEC 61300-3-7:2009 was approved by CENELEC as a European Standard with common modifications. 2 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)Annex ZA (normative) Normative references to international publicationswith their corresponding European publications The following referenced documents

19、 are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, i

20、ndicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterising the amplitude of

21、 the spectral transfer function of DWDM components EN 61300-3-29 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - 3 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)CONTENTSFOREWORD.21 Scope.92 Normative refere

22、nces.93 Abbreviations and acronyms.94 General114.1 General description.114.2 Spectral conditions124.3 Definition.124.3.1 Attenuation124.3.2 Return loss134.4 Device under test134.5 Measurement methods144.5.1 Method A Broadband light source (BBS).144.5.2 Method B Tuneable narrowband light source (TLS)

23、.154.5.3 Method C Set of multiple fixed narrowband light sources (NLS)154.5.4 Method D Tuneable OTDR164.5.5 Reference method.165 Apparatus.165.1 Wavelength source165.1.1 Method A Broadband light source.165.1.2 Method B Tuneable narrowband light source165.1.3 Method C Set of N narrowband light source

24、s175.1.4 Method D Tuneable OTDR175.1.5 Depolarizer175.2 Detection system.185.2.1Method A, Method B.2 and Method C.2 tuneable narrowbanddetection spectrum185.2.2 Method B.1 and Method C.1 broadband detection spectrum185.3 Branching devices.185.4 Termination.196 Procedure 196.1 Method A broadband ligh

25、t source.196.1.1 Attenuation-only196.1.2 Return-loss-only206.1.3 Attenuation and return loss216.2Method B Tuneable narrowband light source6.3 Method C Set of multiple fixed narrowband light sources236.3.1 Attenuation-only236.3.2 Return-loss-only256.3.3 Attenuation and return loss266.4 Test results.2

26、87 Details to be specified287.1 Source287.1.1 Broadband source.287.1.2 Tuneable or discrete narrowband light source297.1.3 Depolarizer29 4 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)227.2 Detection system.297.2.1 Optical power meter 297.2.2 Optical spectrum analyser.297.3 Reference branching device29

27、7.4 Termination.29AnnexA (informative) Dev ice under test configurations, terminations and producttypes 30Annex B (informative) Typical light source characteristics32Figure 1 Wavelength dependence of attenuation and return loss .13Figure 2 Method A Attenuation-only measurement20Figure 3 Method A Ret

28、urn-loss-only measurement21Figure 4 Method A Attenuation and return loss measurement22Figure 5 Method C Attenuation-only measurement24Figure 6 Method C Return-loss-only measurement.24Figure 7 Method C Attenuation and return loss measurement.27Figure 8 Wavelength dependent attenuation28Table 1 Test m

29、ethods and characteristics14Table 2 Wavelength dependent attenuation and return loss.28Table A.1 Device under test configurations/terminations30Table A.2 Possible types of passive optical components (POC).30Table B.1 Types of broadband light source (BBS) and main characteristics.32Table B.2 Types of

30、 tuneable light source (TLS) and main characteristics.33 5 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)This page deliberately set blank 6 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)INTERNATIONAL ELECTROTECHNICAL COMMISSION_ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TESTAND MEASUR

31、EMENT PROCEDURES Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprisingall national electrotechnicalcommittees (I

32、EC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International St andards, Technical Specifications,TechnicalReports,

33、Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interestedin the subject dealtwith may participate in this preparatory work. International,governmental and non-govern

34、mental organizations liaising with the IEC also participate in thispreparation. IEC collaborates closelywith the International Organization for Standardization (ISO) in accordance with conditions determined byagreement between the two organizations.2) The formal decisions or agreements of IEC on tec

35、hnical matters express, as nearlyas possible, an internationalconsensus ofopinion on the relevant subjects since each technical committee has representation from allinterested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC

36、NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cannot be held responsible for the way in which they are used or for anymisinterpretation by any end user.4) In order to promote international uniformity,

37、IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publication and the corresponding national or regional publication shall be clearly indicated inthe latter.5) IEC provide

38、s no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformitywith an IEC Publication.6) All users should ensure that they have the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, se

39、rvants or agents including individual experts andmembers of its technical committees and IEC NationalCommittees for any personal injury, property damage orother damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication

40、, use of,or reliance upon, this IEC Publication or any other IECPublications.8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications isindispensable for the correct application of this publication.9) Attention is drawn to the possibility that s

41、ome of the elements of this IEC Publication may be the subject ofpatent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61300-3-7 hasbeen prepared by subcommittee 86B: Fibre opticinterconnecting devicesand passive components, of IEC

42、technical committee 86: Fibre optics.This second edition cancels and replaces the first edition published in 2000. It constitutes atechnical revision.Changes from the previousedition of this standardare to reflect changesmade to IEC 61300-1and covers unidirectional and bi-directional methods of meas

43、urement. 7 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)The text ofthisstandard is based on the following documents:FDIS Report on voting86B/2771/FDIS 86B/2803/RVD Full information on the vot ing for the approval of this st andard can be found in the report onvoting indicated in the above table.This pu

44、blication has been dr afted in accordance with the ISO/IEC Directives, Part 2.A list of all partsof IEC 61300 series, published under the gener al title, Fibre opticinterconnecting devices and passivecomponents Basic test and measurement procedures , can be found on the IEC website.Thecommittee has

45、decided that the contents of thispublication will remain unchanged u ntil the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ inthe data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replacedbya revised edition,

46、 or amended. A bilingual version ofthisstandard may be issued ata later date. 8 BS EN 61300-3-7:2012 EN 61300-3-7:2012 (E)FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TESTAND MEASUREMENT PROCEDURES Part 3-7: Examinations and measurements Wavelength dependence of attenuation and r

47、eturn loss of single mode components 1 Scope This part of IEC 61300-3 describes the various methods available to measure the wavelengthdependence of attenuation A ( ) and returnloss RL( ), ofsingle-mode passive opticalcomponents (POC) used in fibre-optic (FO) telecommu nications. Itisnot, however, a

48、pplicable to dense wavelength division multiplexing (DWDM) devices.Measurement methodsofwavelength dependence of attenuation of DWDM devices are described in IEC 61300-3-29. DefinitionofWDM device types is given in IEC 62074-1.Three measurement cases are herein considered: Measurement of A ( ) only;

49、 Measurement of RL( ) only; Measurement of A ( ) and RL( ) at the same time. These measurements may be performed in one direction (unidirectional) or bi-directionally.2 Normative referencesThe following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, thelatestedition of the referenced (including anyamendments)applies.IEC 61300-3-