EN 61340-5-3-2010 en Electrostatics - Part 5-3 Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended fo.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectrostaticsPart 5-3: Protection of electronic devices from electrostatic phenomena Properties and requirements classifications for packaging intended for electrostatic dischar

2、ge sensitive devicesBS EN 61340-5-3:2010National forewordThis British Standard is the UK implementation of EN 61340-5-3:2010. It isidentical to IEC 61340-5-3:2010.The UK participation in its preparation was entrusted to Technical CommitteeGEL/101, Electrostatics.A list of organizations represented o

3、n this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 57238 8ICS 17.220.99; 29.020Compliance with a British Standard cannot confer i

4、mmunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 December 2010.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61340-5-3:2010EUROPEAN STANDARD EN 61340-5-3 NORME EUROPENNE EUR

5、OPISCHE NORM May 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by a

6、ny means reserved worldwide for CENELEC members. Ref. No. EN 61340-5-3:2010 E ICS 17.220.99; 29.020 English version Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharg

7、e sensitive devices (IEC 61340-5-3:2010) Electrostatique - Partie 5-3: Protection des dispositifs lectroniques contre les phnomnes lectrostatiques - Classifications des proprits et des exigences relatives lemballage destin aux dispositifs sensibles aux dcharges lectrostatiques (CEI 61340-5-3:2010) E

8、lektrostatik - Teil 5-3: Schutz von elektronischen Bauelementen gegen elektrostatische Phnomene - Eigenschaften und Anforderungen fr die Klassifizierung von Verpackungen welche fr Bauelemente verwendet werden, die gegen elektrostatische Entladungen empfindlich sind (IEC 61340-5-3:2010) This European

9、 Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

10、ncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member in

11、to its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel

12、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61340-5-3:2010EN 61340-5-3:2010 - 2 - Foreword The text of document 101/295/FDIS, future edition 1 of IEC 61340-

13、5-3, prepared by IEC TC 101, Electrostatics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61340-5-3 on 2010-05-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be he

14、ld responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-02-01 latest date by which the national standards conflictin

15、g with the EN have to be withdrawn (dow) 2013-05-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61340-5-3:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following not

16、es have to be added for the standards indicated: 2 IEC 61340-5-1 NOTE Harmonized as EN 61340-5-1. 3 IEC/TR 61340-5-2 NOTE Harmonized as CLC/TR 61340-5-2. 4 IEC 61340-3-1 NOTE Harmonized as EN 61340-3-1. 5 IEC 61340-3-2 NOTE Harmonized as EN 61340-3-2. _ BS EN 61340-5-3:2010- 3 - EN 61340-5-3:2010 An

17、nex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edi

18、tion of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61340-2-3 - Electrostatics - Part 2-3: Methods of test for deter

19、mining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation EN 61340-2-3 - IEC 61340-4-8 - Electrostatics - Part 4-8: Standard test methods for specific applications - Discharge shielding - Bags - - ANSI/ESD STM 11.13 - Two-point resistance measure

20、ment - - BS EN 61340-5-3:2010 2 61340-5-3 IEC:2010 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 Tailoring .7 5 Packaging application requirement .7 5.1 General .7 5.2 Inside an EPA .7 5.3 Outside an EPA.8 6 Classification of ESD packaging material properti

21、es .8 6.1 General .8 6.2 Material resistance properties .8 6.2.1 Resistance of conductive materials8 6.2.2 Resistance of electrostatic field shielding materials .8 6.2.3 Resistance of dissipative materials9 6.2.4 Resistance of insulative materials9 6.3 Material electrostatic shielding properties9 6.

22、3.1 Electrostatic discharge shielding .9 6.3.2 Electrostatic field shielding 9 7 Technical requirements for ESD protective packaging 9 7.1 Packaging and material properties 9 7.2 Packaging marking9 7.2.1 Classification symbol.9 7.2.2 Packaging classification 9 7.2.3 Traceability9 Annex A (informativ

23、e) ESD packaging material guidance .13 Annex B (informative) Device damage .17 Bibliography18 Figure 1 Example of packaging label10 Figure 2 Examples of EPA configurations 12 Figure A.1 Application of ESD protective packaging.15 Table 1 Test methods for electrostatic protective packaging 10 Table 2

24、Test methods and requirements for electrostatic discharge shielding packaging .11 Table A.1 Packaging characteristics for environmental consideration.13 Table A.2 Examples for qualification and verification of packaging.16 BS EN 61340-5-3:201061340-5-3 IEC:2010 5 INTRODUCTION Packaging is necessary

25、to protect electrostatic discharge sensitive devices (ESDS) from physical and environmental damage during manufacture, transportation and storage. Additionally, packaging for ESDS should also prevent damage from static electricity. BS EN 61340-5-3:2010 6 61340-5-3 IEC:2010 ELECTROSTATICS Part 5-3: P

26、rotection of electronic devices from electrostatic phenomena Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices 1 Scope This part of IEC 61340 defines the ESD protective packaging properties needed to protect electrostatic discharge sensit

27、ive devices (ESDS) through all phases of production, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interferenc

28、e (EMI), radio frequency interference (RFI), electromagnetic pulsing (EMP) nor protection of volatile materials. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referen

29、ces, the latest edition of the referenced document (including any amendments) applies. IEC 61340-2-3, Electrostatics Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation IEC 61340-4-8, Electrostatics Part 4

30、-8: Standard test methods for specific applications Discharge shielding - Bags ANSI/ESD STM 11.13, Two-point resistance measurement 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 electrostatic discharge ESD transfer of charge between bodies

31、at different electrostatic potentials 3.2 electrostatic discharge sensitive device ESDS sensitive devices, integrated circuit or assembly that may be damaged by electrostatic fields or electrostatic discharge 3.3 ESD protected area EPA area in which an ESDS can be handled with accepted risk of damag

32、e as a result of electrostatic discharge or fields BS EN 61340-5-3:201061340-5-3 IEC:2010 7 3.4 unprotected area UPA areas outside an EPA as shown in Figure 2 3.5 intimate packaging material which makes contact with ESDS 3.6 proximity packaging material not making contact with ESDS which is used to

33、enclose one or more devices 3.7 secondary packaging material used primarily to give additional physical protection to the outside of a proximity package 3.8 volume resistance ratio of a d.c. voltage (V) applied between two electrodes placed on two (opposite) surfaces of a specimen and the current (A

34、) between the electrodes 3.9 surface resistance ratio of a d.c. voltage (V) applied between two electrodes on a surface of a specimen and the current (A) between the electrodes 4 Tailoring This standard, or portions thereof, may not apply to all applications. Tailoring is accomplished by evaluating

35、the applicability of each requirement for the specific application. Upon completion of the evaluation, requirements may be added, modified or deleted. Tailoring decisions, including rationale, shall be documented. 5 Packaging application requirement 5.1 General Transportation of ESDS requires packag

36、ing that provides protection from electrostatic hazards. Within an EPA in which all ESD risks are well controlled, ESD protective packaging may not be necessary. 5.2 Inside an EPA Packaging used within an EPA shall consist of dissipative or conductive materials for intimate contact. Items sensitive

37、to 100 V human body model (HBM) may need additional protection depending on application and program plan requirements. NOTE Dissipative materials are preferred for intimate packaging in situations where charged device model (CDM) damage is a concern. BS EN 61340-5-3:2010 8 61340-5-3 IEC:2010 5.3 Out

38、side an EPA Transportation of sensitive products outside of an EPA shall require packaging that provides both: a) dissipative or conductive materials for intimate contact; b) a structure that provides electrostatic discharge shielding. NOTE 1 If electrostatic field shielding materials are used to pr

39、ovide discharge shielding, a material that provides a barrier to current flow should be used in combination with the electrostatic field shielding material. NOTE 2 Dissipative materials are preferred for intimate packaging in situations where charged device model (CDM) damage is a concern. 6 Classif

40、ication of ESD packaging material properties 6.1 General Materials and packages that are useful in preventing damage to sensitive electronic devices exhibit certain properties. These properties include: a) resistance properties: conductive; dissipative; b) Shielding properties: electrostatic dischar

41、ge; electrostatic field. 6.2 Material resistance properties Most standard packaging materials are electrically insulative and insulative materials retain charge. Making the package less insulative provides a path for the charge to dissipate from the package to a material at a lower potential. Specif

42、ic ranges of resistance are useful for different purposes. Packaging can be classified by these resistance ranges of its construction. 6.2.1 Resistance of conductive materials Conductive materials may be surface conductive, volume conductive or both. A surface conductive material shall have a surfac

43、e resistance of 1 104 . Volume conductive materials shall have a volume resistance 1 104. 6.2.2 Resistance of electrostatic field shielding materials Within the conductive materials classification, electrostatic field shielding materials shall have a homogeneous layer with a surface resistance of 1

44、103 or a volume resistance of 1 103. Other methods may also define the electrostatic field shielding classification. NOTE These resistance values do not necessarily imply RFI/EMI/EMP shielding. BS EN 61340-5-3:201061340-5-3 IEC:2010 9 6.2.3 Resistance of dissipative materials A static dissipative ma

45、terial shall have a surface resistance 1 104 and 1 1011, or a volume resistance 1 104 and 1 1011. 6.2.4 Resistance of insulative materials Electrostatic insulative materials have a surface resistance 1 1011, or a volume resistance 1 1011. 6.3 Material electrostatic shielding properties NOTE Electros

46、tatic shielding materials protect packaged sensitive electronic items from the effects of electrostatic discharges and fields that are external to the package. 6.3.1 Electrostatic discharge shielding Electrostatic discharge shielding packaging is capable of attenuating an electrostatic discharge. Th

47、e calculated energy allowed inside a static discharge shielding bag shall be less than 50 nJ when tested according to IEC 61340-4-8 or equivalent test method modified to accommodate the product. 6.3.2 Electrostatic field shielding Electrostatic field shielding packaging is capable of attenuating an

48、electrostatic field. NOTE Classified field-shielding materials may allow current flow through their volume. 7 Technical requirements for ESD protective packaging 7.1 Packaging and material properties Table 1 and 2 provide test methods for determining material classifications for finished packages an

49、d materials. When possible, testing should be performed on the finished package. 7.2 Packaging marking 7.2.1 Classification symbol ESD protective packaging shall be marked with the ESD classification symbol as shown in Figure 1 or in accordance with customer contracts, purchase orders, drawings or other documentation. 7.2.2 Packaging classification The primary function code shall be marked below the ESD classific